Datasheet

ManualsBrandsTEXAS INSTRUMENTS ManualsLogic ICsLogic IC - Buffer, driver TSSOP 48

www.ti.com

FEATURES

DL, DGG, OR DGV PACKAGE

(TOP VIEW)

1OE

1Y1

1Y2

GND

1Y3

1Y4

2Y1

2Y2

GND

2Y3

2Y4

3Y1

3Y2

GND

3Y3

3Y4

4Y1

4Y2

GND

4Y3

4Y4

4OE

2OE

1A1

1A2

GND

1A3

1A4

2A1

2A2

GND

2A3

2A4

3A1

3A2

GND

3A3

3A4

4A1

4A2

GND

4A3

4A4

3OE

DESCRIPTION/ORDERING INFORMATION

SN74LVCH162244A

16-BIT BUFFER/DRIVER

WITH 3-STATE OUTPUTS

SCAS545K – OCTOBER 1995 – REVISED MARCH 2005

• Member of the Texas Instruments Widebus™

Family

• Operates From 1.65 V to 3.6 V

• Inputs Accept Voltages to 5.5 V

• Max t

of 4.4 ns at 3.3 V

• Output Ports Have Equivalent 26- Ω Series

Resistors, So No External Resistors Are

Required

• Typical V

OLP

(Output Ground Bounce) < 0.8 V

at V

= 3.3 V, T

= 25 ° C

• Typical V

OHV

(Output V

Undershoot) > 2 V

at V

= 3.3 V, T

= 25 ° C

• I

off

Supports Partial-Power-Down Mode

Operation

• Supports Mixed-Mode Signal Operation on All

Ports (5-V Input/Output Voltage With

3.3-V V

)

• Bus Hold on Data Inputs Eliminates the Need

for External Pullup/Pulldown Resistors

• Latch-Up Performance Exceeds 250 mA Per

JESD 17

• ESD Protection Exceeds JESD 22

– 2000-V Human-Body Model (A114-A)

– 200-V Machine Model (A115-A)

– 1000-V Charged-Device Model (C101)

This 16-bit buffer/driver is designed for 1.65-V to 3.6-V V

operation.

The SN74LVCH162244A is designed specifically to improve both the performance and density of 3-state memory

address drivers, clock drivers, and bus-oriented receivers and transmitters. The device can be used as four 4-bit

buffers, two 8-bit buffers, or one 16-bit buffer. It provides true outputs and symmetrical active-low output-enable

( OE) inputs.

ORDERING INFORMATION

PACKAGE

(1)

ORDERABLE PART NUMBER TOP-SIDE MARKING

Tube SN74LVCH162244ADL

SSOP – DL LVCH162244A

Tape and reel SN74LVCH162244ADLR

–40 ° C to 85 ° C

TSSOP – DGG Tape and reel SN74LVCH162244AGR LVCH162244A

TVSOP – DGV Tape and reel SN74LVCH162244AVR LN2244A

(1) Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at

www.ti.com/sc/package.

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas

Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

Widebus is a trademark of Texas Instruments.

PRODUCTION DATA information is current as of publication date.

Products conform to specifications per the terms of the Texas

Instruments standard warranty. Production processing does not

necessarily include testing of all parameters.

Summary of content (14 pages)

PAGE 1
SN74LVCH162244A 16-BIT BUFFER/DRIVER WITH 3-STATE OUTPUTS www.ti.com SCAS545K – OCTOBER 1995 – REVISED MARCH 2005 FEATURES • • • • • • • • • • • • DL, DGG, OR DGV PACKAGE (TOP VIEW) Member of the Texas Instruments Widebus™ Family Operates From 1.65 V to 3.6 V Inputs Accept Voltages to 5.5 V Max tpd of 4.4 ns at 3.3 V Output Ports Have Equivalent 26-Ω Series Resistors, So No External Resistors Are Required Typical VOLP (Output Ground Bounce) < 0.8 V at VCC = 3.
PAGE 2
SN74LVCH162244A 16-BIT BUFFER/DRIVER WITH 3-STATE OUTPUTS www.ti.com SCAS545K – OCTOBER 1995 – REVISED MARCH 2005 DESCRIPTION/ORDERING INFORMATION (CONTINUED) The outputs, which are designed to sink up to 12 mA, include equivalent 26-Ω resistors to reduce overshoot and undershoot. Inputs can be driven from either 3.3-V or 5-V devices. This feature allows the use of these devices as translators in a mixed 3.3-V/5-V system environment.
PAGE 3
SN74LVCH162244A 16-BIT BUFFER/DRIVER WITH 3-STATE OUTPUTS www.ti.com Absolute Maximum Ratings SCAS545K – OCTOBER 1995 – REVISED MARCH 2005 (1) over operating free-air temperature range (unless otherwise noted) MIN MAX VCC Supply voltage range –0.5 6.5 V VI Input voltage range (2) –0.5 6.5 V –0.5 6.5 V –0.5 VCC + 0.
PAGE 4
SN74LVCH162244A 16-BIT BUFFER/DRIVER WITH 3-STATE OUTPUTS www.ti.com SCAS545K – OCTOBER 1995 – REVISED MARCH 2005 Electrical Characteristics over recommended operating free-air temperature range (unless otherwise noted) PARAMETER TEST CONDITIONS IOH = –100 µA 1.65 V to 3.6 V IOH = –2 mA VOH II II(hold) 1.2 2.3 V 1.7 2.7 V 2.2 IOH = –6 mA 3V 2.4 IOH = –8 mA 2.7 V 2 IOH = –12 mA 3V 2 IOL = 100 µA 1.65 V to 3.6 V 0.2 1.65 V 0.45 2.3 V 0.7 IOH = –4 mA IOL = 4 mA 0.
PAGE 5
SN74LVCH162244A 16-BIT BUFFER/DRIVER WITH 3-STATE OUTPUTS www.ti.com SCAS545K – OCTOBER 1995 – REVISED MARCH 2005 Operating Characteristics TA = 25°C TEST CONDITIONS PARAMETER Cpd (1) Power dissipation capacitance per buffer/driver Outputs enabled Outputs disabled f = 10 MHz VCC = 1.8 V VCC = 2.5 V VCC = 3.3 V TYP TYP TYP (1) (1) 35 (1) (1) 4 UNIT pF This information was not available at the time of publication.
PAGE 6
SN74LVCH162244A 16-BIT BUFFER/DRIVER WITH 3-STATE OUTPUTS www.ti.com SCAS545K – OCTOBER 1995 – REVISED MARCH 2005 PARAMETER MEASUREMENT INFORMATION VLOAD S1 RL From Output Under Test CL (see Note A) Open GND RL TEST S1 tPLH/tPHL tPLZ/tPZL tPHZ/tPZH Open VLOAD GND LOAD CIRCUIT INPUTS VCC 1.8 V ± 0.15 V 2.5 V ± 0.2 V 2.7 V 3.3 V ± 0.3 V VI tr/tf VCC VCC 2.7 V 2.7 V ≤2 ns ≤2 ns ≤2.5 ns ≤2.5 ns VM VLOAD CL RL V∆ VCC/2 VCC/2 1.5 V 1.
PAGE 7
PACKAGE OPTION ADDENDUM www.ti.
PAGE 8
PACKAGE OPTION ADDENDUM www.ti.com 27-Sep-2007 to Customer on an annual basis.
PAGE 9
PACKAGE MATERIALS INFORMATION www.ti.com 11-Aug-2009 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant SN74LVCH162244ADLR SSOP DL 48 1000 330.0 32.4 11.35 16.2 3.1 16.0 32.0 Q1 SN74LVCH162244AGR TSSOP DGG 48 2000 330.0 24.4 8.6 15.8 1.8 12.0 24.0 Q1 SN74LVCH162244AVR TVSOP DGV 48 2000 330.0 16.4 7.1 10.2 1.6 12.0 16.
PAGE 10
PACKAGE MATERIALS INFORMATION www.ti.com 11-Aug-2009 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) SN74LVCH162244ADLR SSOP DL 48 1000 346.0 346.0 49.0 SN74LVCH162244AGR TSSOP DGG 48 2000 346.0 346.0 41.0 SN74LVCH162244AVR TVSOP DGV 48 2000 346.0 346.0 33.
PAGE 11
MECHANICAL DATA MTSS003D – JANUARY 1995 – REVISED JANUARY 1998 DGG (R-PDSO-G**) PLASTIC SMALL-OUTLINE PACKAGE 48 PINS SHOWN 0,27 0,17 0,50 48 0,08 M 25 6,20 6,00 8,30 7,90 0,15 NOM Gage Plane 1 0,25 24 0°– 8° A 0,75 0,50 Seating Plane 0,15 0,05 1,20 MAX PINS ** 0,10 48 56 64 A MAX 12,60 14,10 17,10 A MIN 12,40 13,90 16,90 DIM 4040078 / F 12/97 NOTES: A. B. C. D. All linear dimensions are in millimeters. This drawing is subject to change without notice.
PAGE 12
MECHANICAL DATA MSSO001C – JANUARY 1995 – REVISED DECEMBER 2001 DL (R-PDSO-G**) PLASTIC SMALL-OUTLINE PACKAGE 48 PINS SHOWN 0.025 (0,635) 0.0135 (0,343) 0.008 (0,203) 48 0.005 (0,13) M 25 0.010 (0,25) 0.005 (0,13) 0.299 (7,59) 0.291 (7,39) 0.420 (10,67) 0.395 (10,03) Gage Plane 0.010 (0,25) 1 0°–ā8° 24 0.040 (1,02) A 0.020 (0,51) Seating Plane 0.110 (2,79) MAX 0.004 (0,10) 0.008 (0,20) MIN PINS ** 28 48 56 A MAX 0.380 (9,65) 0.630 (16,00) 0.730 (18,54) A MIN 0.370 (9,40) 0.
PAGE 13
MECHANICAL DATA MPDS006C – FEBRUARY 1996 – REVISED AUGUST 2000 DGV (R-PDSO-G**) PLASTIC SMALL-OUTLINE 24 PINS SHOWN 0,40 0,23 0,13 24 13 0,07 M 0,16 NOM 4,50 4,30 6,60 6,20 Gage Plane 0,25 0°– 8° 1 0,75 0,50 12 A Seating Plane 0,15 0,05 1,20 MAX PINS ** 0,08 14 16 20 24 38 48 56 A MAX 3,70 3,70 5,10 5,10 7,90 9,80 11,40 A MIN 3,50 3,50 4,90 4,90 7,70 9,60 11,20 DIM 4073251/E 08/00 NOTES: A. B. C. D. All linear dimensions are in millimeters.
PAGE 14
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.