Datasheet

ManualsBrandsTEXAS INSTRUMENTS ManualsInterface ICsInterface IC - drivers RS422 2/0 SOIC 8

SN75158

DUAL DIFFERENTIAL LINE DRIVER

SLLS085B – JANUARY 1977 – REVISED MAY 1995

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

Meets or Exceeds the Requirements of

ANSI EIA/TIA-422-B and ITU

Recommendation V.11

Single 5-V Supply

Balanced-Line Operation

TTL Compatible

High Output Impedance in Power-Off

Condition

High-Current Active-Pullup Outputs

Short-Circuit Protection

Dual Channels

Input Clamp Diodes

description

The SN75158 is a dual differential line driver designed to satisfy the requirements set by the ANSI

EIA/TIA-422-B and ITU V.11 interface specifications. The outputs provide complementary signals with

high-current capability for driving balanced lines, such as twisted pair, at normal line impedance without high

power dissipation. The output stages are TTL totem-pole outputs providing a high-impedance state in the

power-off condition.

The SN75158 is characterized for operation from 0°C to 70°C.

logic symbol

‡

This symbol is in accordance with ANSI/IEEE Std 91-1984

and IEC Publication 617-12.

logic diagram (positive logic)

2A 7

PRODUCTION DATA information is current as of publication date.

Products conform to specifications per the terms of Texas Instruments

standard warranty. Production processing does not necessarily include

testing of all parameters.

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of

Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

GND

D, P, OR PS

†

PACKAGE

(TOP VIEW)

†

The PS package is only available left-end

taped and reeled, i.e., order SN75158PSLE.

Summary of content (17 pages)

PAGE 1
SN75158 DUAL DIFFERENTIAL LINE DRIVER SLLS085B – JANUARY 1977 – REVISED MAY 1995 D D D D D D D D D D, P, OR PS† PACKAGE (TOP VIEW) Meets or Exceeds the Requirements of ANSI EIA/TIA-422-B and ITU Recommendation V.
PAGE 2
SN75158 DUAL DIFFERENTIAL LINE DRIVER SLLS085B – JANUARY 1977 – REVISED MAY 1995 schematics of inputs and outputs EQUIVALENT OF EACH INPUT VCC TYPICAL OF ALL OUTPUTS VCC 4 kΩ NOM 9 Ω NOM Input Output GND GND absolute maximum ratings over operating free-air temperature range (unless otherwise noted)† Supply voltage, VCC (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V Input voltage, VI . . . . . . . . . . . . .
PAGE 3
SN75158 DUAL DIFFERENTIAL LINE DRIVER SLLS085B – JANUARY 1977 – REVISED MAY 1995 electrical characteristics over operating free-air temperature range (unless otherwise noted) TEST CONDITIONS† PARAMETER VIK Input clamp voltage VCC = MIN, II = – 12 mA VOH High level output voltage High-level VCC = MIN,, VIH = 2 V, VIL = 0.8 V,, IOH = – 40 mA VOL Low level output voltage Low-level VCC = MIN,, VIH = 2 V, VIL = 0.
PAGE 4
SN75158 DUAL DIFFERENTIAL LINE DRIVER SLLS085B – JANUARY 1977 – REVISED MAY 1995 PARAMETER MEASUREMENT INFORMATION 50 Ω VOD2 50 Ω VOC Figure 1.
PAGE 5
SN75158 DUAL DIFFERENTIAL LINE DRIVER SLLS085B – JANUARY 1977 – REVISED MAY 1995 TYPICAL CHARACTERISTICS OUTPUT VOLTAGE vs DATA INPUT VOLTAGE OUTPUT VOLTAGE vs DATA INPUT VOLTAGE 6 6 No Load TA = 25°C VCC = 5 V No Load 5 VCC = 5.5 V 4 VO VO – Output Voltage – V VO VO – Output Voltage – V 5 VCC = 5 V VCC = 4.
PAGE 6
SN75158 DUAL DIFFERENTIAL LINE DRIVER SLLS085B – JANUARY 1977 – REVISED MAY 1995 TYPICAL CHARACTERISTICS OUTPUT VOLTAGE vs FREE-AIR TEMPERATURE PROPAGATION DELAY TIMES vs FREE-AIR TEMPERATURE 4 30 VCC = 5 V VOH(IOH = – 20 mA) tpd t pd– Propagation Delay Times – ns V VO O – Output Voltage – V 3.5 3 VOH(IOH = – 40 mA) 2.5 2 1.5 1 0.
PAGE 7
SN75158 DUAL DIFFERENTIAL LINE DRIVER SLLS085B – JANUARY 1977 – REVISED MAY 1995 TYPICAL CHARACTERISTICS SUPPLY CURRENT (BOTH DRIVERS) vs FREQUENCY I ICC CC – Supply Current – mA 100 VCC = 5 V RL = ∞ CL = 30 pF Inputs: 3-V Square Wave TA = 25 °C 80 60 40 20 0 0.1 0.
PAGE 8
PACKAGE OPTION ADDENDUM www.ti.
PAGE 9
PACKAGE OPTION ADDENDUM www.ti.com 18-Sep-2008 In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
PAGE 10
PACKAGE MATERIALS INFORMATION www.ti.com 14-Jul-2012 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant SN75158DR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 SN75158PSR SO PS 8 2000 330.0 16.4 8.2 6.6 2.5 12.0 16.
PAGE 11
PACKAGE MATERIALS INFORMATION www.ti.com 14-Jul-2012 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) SN75158DR SN75158PSR SOIC D 8 2500 340.5 338.1 20.6 SO PS 8 2000 367.0 367.0 38.
PAGE 12
PAGE 13
PAGE 14
PAGE 15
PAGE 16
PAGE 17
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.