Datasheet

ManualsBrandsTEXAS INSTRUMENTS ManualsPMICsPMIC - gate drivers OR Low side PDIP 8

SN55451B, SN55452B, SN55453B, SN55454B

SN75451B, SN75452B, SN75453B, SN75454B

DUAL PERIPHERAL DRIVERS

SLRS021B – DECEMBER 1976 – REVISED SEPTEMBER 1999

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

PERIPHERAL DRIVERS FOR

HIGH-CURRENT SWITCHING AT

VERY HIGH SPEEDS

Characterized for Use to 300 mA

High-Voltage Outputs

No Output Latch-Up at 20 V (After

Conducting 300 mA)

High-Speed Switching

Circuit Flexibility for Varied Applications

TTL-Compatible Diode-Clamped Inputs

Standard Supply Voltages

Plastic DIP (P) With Copper Lead Frame

Provides Cooler Operation and Improved

Reliability

Package Options Include Plastic

Small-Outline Packages, Ceramic Chip

Carriers, and Standard Plastic and Ceramic

300-mil DIPs

SUMMARY OF DEVICES

DEVICE

LOGIC OF

COMPLETE CIRCUIT

PACKAGES

SN55451B AND FK, JG

SN55452B NAND JG

SN55453B OR FK, JG

SN55454B NOR JG

SN75451B AND D, P

SN75452B NAND D, P

SN75453B OR D, P

SN75454B NOR D, P

description

The SN55451B through SN55454B and SN75451B through SN75454B are dual peripheral drivers designed

for use in systems that employ TTL logic. This family is functionally interchangeable with and replaces the

SN75450 family and the SN75450A family devices manufactured previously. The speed of the devices is equal

to that of the SN75450 family, and the parts are designed to ensure freedom from latch-up. Diode-clamped

inputs simplify circuit design. Typical applications include high-speed logic buffers, power drivers, relay drivers,

lamp drivers, MOS drivers, line drivers, and memory drivers.

The SN55451B/SN75451B, SN55452B/SN75452B, SN55453B/SN75453B, and SN55454B/SN75454B are

dual peripheral AND, NAND, OR, and NOR drivers, respectively (assuming positive logic), with the output of

the logic gates internally connected to the bases of the npn output transistors.

The SN55’ drivers are characterized for operation over the full military range of –55°C to 125°C. The SN75’

drivers are characterized for operation from 0°C to 70°C.

PRODUCTION DATA information is current as of publication date.

Products conform to specifications per the terms of Texas Instruments

standard warranty. Production processing does not necessarily include

testing of all parameters.

GND

SN55451B, SN55452B,

SN55453B, SN55454B . . . JG PACKAGE

SN75451B, SN75452B,

SN75453B, SN75454B ...D OR P PACKAGE

(TOP VIEW)

3 2 1 20 19

910111213

SN55451B, SN55452B

SN55453B, SN55454B . . . FK PACKAGE

(TOP VIEW)

GND

NC – No internal connection

Summary of content (24 pages)

PAGE 1
SN55451B, SN55452B, SN55453B, SN55454B SN75451B, SN75452B, SN75453B, SN75454B DUAL PERIPHERAL DRIVERS SLRS021B – DECEMBER 1976 – REVISED SEPTEMBER 1999 D D D D D D D D D Characterized for Use to 300 mA High-Voltage Outputs No Output Latch-Up at 20 V (After Conducting 300 mA) High-Speed Switching Circuit Flexibility for Varied Applications TTL-Compatible Diode-Clamped Inputs Standard Supply Voltages Plastic DIP (P) With Copper Lead Frame Provides Cooler Operation and Improved Reliability Package Options In
PAGE 2
SN55451B, SN55452B, SN55453B, SN55454B SN75451B, SN75452B, SN75453B, SN75454B DUAL PERIPHERAL DRIVERS SLRS021B – DECEMBER 1976 – REVISED SEPTEMBER 1999 absolute maximum ratings over operating free-air temperature range (unless otherwise noted) SN55’ Supply voltage, VCC (see Note 1) SN75’ UNIT 7 7 V Input voltage, VI 5.5 5.5 V Inter-emitter voltage (see Note 2) 5.5 5.
PAGE 3
SN55451B, SN55452B, SN55453B, SN55454B SN75451B, SN75452B, SN75453B, SN75454B DUAL PERIPHERAL DRIVERS SLRS021B – DECEMBER 1976 – REVISED SEPTEMBER 1999 logic symbol† 1A 1B 2A 2B logic diagram (positive logic) 1 & 2 3 6 5 7 1Y 1A B Y L L L (on state) L H L (on state) H L L (on state) H H H (off state) 2Y 7 2B 4 GND schematic (each driver) FUNCTION TABLE (each driver) A 5 6 2A † This symbol is in accordance with ANSI/IEEE Std 91-1984 and IEC publication 617-12.
PAGE 4
SN55451B, SN55452B, SN55453B, SN55454B SN75451B, SN75452B, SN75453B, SN75454B DUAL PERIPHERAL DRIVERS SLRS021B – DECEMBER 1976 – REVISED SEPTEMBER 1999 logic symbol† 1A 1B 2A 2B logic diagram (positive logic) 1 & 2 3 6 5 7 1A 1Y 5 6 2A 4 † This symbol is in accordance with ANSI/IEEE Std 91-1984 and IEC publication 617-12. GND schematic (each driver) Pin numbers shown are for the D, JG, and P packages. FUNCTION TABLE (each driver) B 2Y 7 2B A 1Y 2 1B 2Y 3 1 VCC 1.6 kΩ 1.
PAGE 5
SN55451B, SN55452B, SN55453B, SN55454B SN75451B, SN75452B, SN75453B, SN75454B DUAL PERIPHERAL DRIVERS SLRS021B – DECEMBER 1976 – REVISED SEPTEMBER 1999 logic symbol† 1A 1B 2A 2B logic diagram (positive logic) 1 ≥1 2 3 1A 1Y 1B 6 5 7 2Y 2A 2B † This symbol is in accordance with ANSI/IEEE Std 91-1984 and IEC publication 617-12. Pin numbers shown are for the D, JG, and P packages.
PAGE 6
SN55451B, SN55452B, SN55453B, SN55454B SN75451B, SN75452B, SN75453B, SN75454B DUAL PERIPHERAL DRIVERS SLRS021B – DECEMBER 1976 – REVISED SEPTEMBER 1999 logic symbol† 1A 1B 2A 2B logic diagram (positive logic) 1 ≥1 2 3 6 5 7 1A 1Y B Y L L H (off state) L H L (on state) H L L (on state) H H L (on state) 2Y 7 2B 4 GND schematic (each driver) FUNCTION TABLE (each driver) A 5 6 2A † This symbol is in accordance with ANSI/IEEE Std 91-1984 and IEC publication 617-12.
PAGE 7
SN55451B, SN55452B, SN55453B, SN55454B SN75451B, SN75452B, SN75453B, SN75454B DUAL PERIPHERAL DRIVERS SLRS021B – DECEMBER 1976 – REVISED SEPTEMBER 1999 PARAMETER MEASUREMENT INFORMATION ≤ 10 ns ≤ 5 ns Input 10 V 2.4 V 90% Input ’451B ’453B RL = 50 Ω ’451B ’452B 1.5 V 1.5 V 10% Output Pulse Generator (see Note A) ’453B ’454B GND 0V ≤ 10 ns 3V Input ’452B ’454B 90% 90% 1.5 V 1.5 V 10% CL = 15 pF (see Note B) SUB 10% 0.
PAGE 8
SN55451B, SN55452B, SN55453B, SN55454B SN75451B, SN75452B, SN75453B, SN75454B DUAL PERIPHERAL DRIVERS SLRS021B – DECEMBER 1976 – REVISED SEPTEMBER 1999 TYPICAL CHARACTERISTICS VCE(sat) VCE(sat) – Collector-Emitter Saturation Voltage – V TRANSISTOR COLLECTOR-EMITTER SATURATION VOLTAGE vs COLLECTOR CURRENT 0.6 0.5 IC = 10 IB See Note A 0.4 TA = 70°C 0.3 TA = 0°C 0.2 0.
PAGE 9
PACKAGE OPTION ADDENDUM www.ti.
PAGE 10
PACKAGE OPTION ADDENDUM www.ti.
PAGE 11
PACKAGE OPTION ADDENDUM www.ti.
PAGE 12
PACKAGE OPTION ADDENDUM www.ti.
PAGE 13
PACKAGE OPTION ADDENDUM www.ti.com 25-Sep-2013 (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production.
PAGE 14
PACKAGE OPTION ADDENDUM www.ti.
PAGE 15
PACKAGE MATERIALS INFORMATION www.ti.com 14-Jul-2012 TAPE AND REEL INFORMATION *All dimensions are nominal Device SN75451BDR Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 SN75451BPSR SO PS 8 2000 330.0 16.4 8.2 6.6 2.5 12.0 16.0 Q1 SN75452BDR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 SN75452BPSR SO PS 8 2000 330.
PAGE 16
PACKAGE MATERIALS INFORMATION www.ti.com 14-Jul-2012 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) SN75451BDR SOIC D 8 2500 340.5 338.1 20.6 SN75451BPSR SO PS 8 2000 367.0 367.0 38.0 SN75452BDR SOIC D 8 2500 340.5 338.1 20.6 SN75452BPSR SO PS 8 2000 367.0 367.0 38.0 SN75453BDR SOIC D 8 2500 340.5 338.1 20.6 SN75453BPSR SO PS 8 2000 367.0 367.0 38.0 SN75454BDR SOIC D 8 2500 340.
PAGE 17
MECHANICAL DATA MCER001A – JANUARY 1995 – REVISED JANUARY 1997 JG (R-GDIP-T8) CERAMIC DUAL-IN-LINE 0.400 (10,16) 0.355 (9,00) 8 5 0.280 (7,11) 0.245 (6,22) 1 0.063 (1,60) 0.015 (0,38) 4 0.065 (1,65) 0.045 (1,14) 0.310 (7,87) 0.290 (7,37) 0.020 (0,51) MIN 0.200 (5,08) MAX Seating Plane 0.130 (3,30) MIN 0.023 (0,58) 0.015 (0,38) 0°–15° 0.100 (2,54) 0.014 (0,36) 0.008 (0,20) 4040107/C 08/96 NOTES: A. B. C. D. E. All linear dimensions are in inches (millimeters).
PAGE 18
PAGE 19
PAGE 20
PAGE 21
PAGE 22
PAGE 23
PAGE 24
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.