Datasheet

ManualsBrandsTEXAS INSTRUMENTS ManualsInterface ICsInterface IC - transceivers RS232 2/2 SOIC 16

FEATURES

D, DB, DW, OR PW PACKAGE

(TOP VIEW)

C1+

V+

C1−

C2+

C2−

V−

DOUT2

RIN2

GND

DOUT1

RIN1

ROUT1

DIN1

DIN2

ROUT2

APPLICATIONS

DESCRIPTION/ORDERING INFORMATION

SN65C3232E , , SN75C3232E

3-V TO 5.5-V TWO-CHANNEL RS-232 1-MBIT/S LINE DRIVERS/RECEIVERS

WITH ± 15-kV IEC ESD PROTECTION

SLLS697A – DECEMBER 2005 – REVISED DECEMBER 2007

www.ti.com

• Operate With 3-V to 5.5-V V

Supply

• Operate up to 1 Mbit/s

• Low Supply Current . . . 300 µ A Typ

• External Capacitors . . . 4 × 0.1 µ F

• Accept 5-V Logic Input With 3.3-V Supply

• Latch-Up Performance Exceeds 100 mA Per

JESD 78, Class II

• ESD Protection for RS-232 Pins

– ± 15-kV Human-Body Model (HBM)

– ± 15-kV IEC 61000-4-2 Air-Gap Discharge

– ± 8-kV IEC 61000-4-2 Contact Discharge

• Battery-Powered Systems

• PDAs

• Notebooks

• Laptops

• Palmtop PCs

• Hand-Held Equipment

The SN65C3232E and SN75C3232E consist of two line drivers, two line receivers, and a dual charge-pump

circuit with ± 15-kV ESD protection pin to pin (serial-port connection pins, including GND). These devices provide

the electrical interface between an asynchronous communication controller and the serial-port connector. The

charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. The devices

operate at data signaling rates up to 1 Mbit/s and a driver output slew rate of 14 V/ µ s to 150 V/ µ s.

ORDERING INFORMATION

PACKAGE

(1) (2)

ORDERABLE PART NUMBER TOP-SIDE MARKING

Tube of 40 SN65C3232ED

SOIC – D 65C3232E

Reel of 2500 SN65C3232EDR

Tube of 40 SN65C3232EDW

SOIC – DW 65C3232E

– 40 ° C to 85 ° C Reel of 2000 SN65C3232EDWR

SSOP – DB Reel of 2000 SN65C3232EDBR MU232E

Tube of 90 SN65C3232EPW

TSSOP – PW MU232E

Reel of 2000 SN65C3232EPWR

Tube of 40 SN75C3232ED

SOIC – D 75C3232E

Reel of 2500 SN75C3232EDR

Tube of 40 SN75C3232EDW

SOIC – DW 75C3232E

0 ° C to 70 ° C Reel of 2000 SN75C3232EDWR

SSOP – DB Reel of 2000 SN75C3232EDBR MY232E

Tube of 90 SN75C3232EPW

TSSOP – PW MY232E

Reel of 2000 SN75C3232EPWR

(1) Package drawings, thermal data, and symbolization are available at www.ti.com/packaging .

(2) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI

website at www.ti.com .

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of

Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

PRODUCTION DATA information is current as of publication date.

Products conform to specifications per the terms of the Texas

Instruments standard warranty. Production processing does not

necessarily include testing of all parameters.

Summary of content (20 pages)

PAGE 1
www.ti.com SN65C3232E,, SN75C3232E 3-V TO 5.5-V TWO-CHANNEL RS-232 1-MBIT/S LINE DRIVERS/RECEIVERS WITH ±15-kV IEC ESD PROTECTION SLLS697A – DECEMBER 2005 – REVISED DECEMBER 2007 FEATURES 1 • • • • • • • D, DB, DW, OR PW PACKAGE (TOP VIEW) Operate With 3-V to 5.5-V VCC Supply Operate up to 1 Mbit/s Low Supply Current . . . 300 µA Typ External Capacitors . . . 4 × 0.1 µF Accept 5-V Logic Input With 3.
PAGE 2
SN65C3232E,, SN75C3232E 3-V TO 5.5-V TWO-CHANNEL RS-232 1-MBIT/S LINE DRIVERS/RECEIVERS WITH ±15-kV IEC ESD PROTECTION SLLS697A – DECEMBER 2005 – REVISED DECEMBER 2007 www.ti.com Table 1. 1-Mbit/s RS-232 Parts TEMPERATURE RANGE NO. OF DRIVERS NO. OF RECEIVERS ESD SUPPLY VCC (V) FEATURE PIN/PACKAGE SN65C3221E 1 1 ±15-kV Air-Gap, ±8-kV Contact, ±15-kV HBM 3.3 or 5 Auto powerdown 16-pin SOIC, SSOP, TSSOP SN65C3232E 2 2 ±15-kV Air-Gap, ±8-kV Contact, ±15-kV HBM 3.
PAGE 3
www.ti.com SN65C3232E,, SN75C3232E 3-V TO 5.
PAGE 4
SN65C3232E,, SN75C3232E 3-V TO 5.5-V TWO-CHANNEL RS-232 1-MBIT/S LINE DRIVERS/RECEIVERS WITH ±15-kV IEC ESD PROTECTION www.ti.com SLLS697A – DECEMBER 2005 – REVISED DECEMBER 2007 Absolute Maximum Ratings (1) over operating free-air temperature range (unless otherwise noted) MIN MAX VCC Supply voltage range (2) –0.3 6 V V+ Positive output supply voltage range (2) –0.3 7 V 0.
PAGE 5
SN65C3232E,, SN75C3232E 3-V TO 5.5-V TWO-CHANNEL RS-232 1-MBIT/S LINE DRIVERS/RECEIVERS WITH ±15-kV IEC ESD PROTECTION www.ti.com SLLS697A – DECEMBER 2005 – REVISED DECEMBER 2007 DRIVER SECTION Electrical Characteristics (1) over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted) PARAMETER TEST CONDITIONS MIN TYP (2) VOH High-level output voltage DOUT at RL = 3 kΩ to GND, DIN = GND 5 5.
PAGE 6
SN65C3232E,, SN75C3232E 3-V TO 5.5-V TWO-CHANNEL RS-232 1-MBIT/S LINE DRIVERS/RECEIVERS WITH ±15-kV IEC ESD PROTECTION www.ti.com SLLS697A – DECEMBER 2005 – REVISED DECEMBER 2007 RECEIVER SECTION Electrical Characteristics (1) over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted) PARAMETER VOH High-level output voltage IOH = –1 mA VOL Low-level output voltage IOL = 1.
PAGE 7
www.ti.com SN65C3232E,, SN75C3232E 3-V TO 5.5-V TWO-CHANNEL RS-232 1-MBIT/S LINE DRIVERS/RECEIVERS WITH ±15-kV IEC ESD PROTECTION SLLS697A – DECEMBER 2005 – REVISED DECEMBER 2007 PARAMETER MEASUREMENT INFORMATION 3V Input Generator (see Note B) 1.5 V RS-232 Output 50 Ω 0V tTHL CL (see Note A) RL 1.5 V Output tTLH 3V −3 V TEST CIRCUIT SR(tr) + t THL 6V or t VOH 3V −3 V VOL VOLTAGE WAVEFORMS TLH NOTES: A. CL includes probe and jig capacitance. B.
PAGE 8
SN65C3232E,, SN75C3232E 3-V TO 5.5-V TWO-CHANNEL RS-232 1-MBIT/S LINE DRIVERS/RECEIVERS WITH ±15-kV IEC ESD PROTECTION SLLS697A – DECEMBER 2005 – REVISED DECEMBER 2007 www.ti.com APPLICATION INFORMATION 1 − 16 + CBYPASS = 0.1 µF − + C1 VCC C1+ 2 V+ + C3 GND 15 − 14 3 DOUT1 C1− 13 4 C2+ + C2 RIN1 5 kΩ − 5 C2− 12 6 C4 V− − 11 ROUT1 DIN1 + DOUT2 RIN2 7 10 8 9 DIN2 ROUT2 5 kΩ VCC vs CAPACITOR VALUES A. VCC C1 C2, C3, C4 3.3 V ± 0.3 V 5 V ± 0.5 V 3 V to 5.5 V 0.
PAGE 9
PACKAGE OPTION ADDENDUM www.ti.
PAGE 10
PACKAGE OPTION ADDENDUM www.ti.
PAGE 11
PACKAGE OPTION ADDENDUM www.ti.com 28-Nov-2007 provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
PAGE 12
PACKAGE MATERIALS INFORMATION www.ti.com 14-Jul-2012 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SN65C3232EDBR SSOP SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) DB 16 2000 330.0 16.4 B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant 8.2 6.6 2.5 12.0 16.0 Q1 SN65C3232EDR SOIC D 16 2500 330.0 16.4 6.5 10.3 2.1 8.0 16.0 Q1 SN65C3232EDWR SOIC DW 16 2000 330.0 16.4 10.75 10.7 2.7 12.0 16.
PAGE 13
PACKAGE MATERIALS INFORMATION www.ti.com 14-Jul-2012 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) SN65C3232EDBR SSOP DB 16 2000 367.0 367.0 38.0 SN65C3232EDR SOIC D 16 2500 367.0 367.0 38.0 SN65C3232EDWR SOIC DW 16 2000 367.0 367.0 38.0 SN65C3232EPWR TSSOP PW 16 2000 367.0 367.0 35.0 SN75C3232EDBR SSOP DB 16 2000 367.0 367.0 38.0 SN75C3232EDR SOIC D 16 2500 367.0 367.0 38.
PAGE 14
PAGE 15
PAGE 16
PAGE 17
PAGE 18
PAGE 19
MECHANICAL DATA MSSO002E – JANUARY 1995 – REVISED DECEMBER 2001 DB (R-PDSO-G**) PLASTIC SMALL-OUTLINE 28 PINS SHOWN 0,38 0,22 0,65 28 0,15 M 15 0,25 0,09 8,20 7,40 5,60 5,00 Gage Plane 1 14 0,25 A 0°–ā8° 0,95 0,55 Seating Plane 2,00 MAX 0,10 0,05 MIN PINS ** 14 16 20 24 28 30 38 A MAX 6,50 6,50 7,50 8,50 10,50 10,50 12,90 A MIN 5,90 5,90 6,90 7,90 9,90 9,90 12,30 DIM 4040065 /E 12/01 NOTES: A. B. C. D. All linear dimensions are in millimeters.
PAGE 20
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.