manual

1
© 2007 TEXAS INSTRUMENTS INCORPORATED TI-34 MultiView: A Guide For Teachers 27
TI-34 MultiView™ basic operations
Keys
1. & turns on the calculator.
2. % turns on the 2ND indicator and
accesses the function shown above the next
key you press.
3. %' turns off the calculator and clears
the display.
4. < completes the operation or executes
the command.
5. %i recalls the most recently calculated
result and displays it as ans.
6. r toggles the answer between fraction and
decimal, and exact pi and decimal.
7. ! and " move the cursor left and right to
scroll entries on the Home screen and to
navigate in menus.
%! or % " scrolls to the beginning or
end of a current entry.
# and $ move the cursor up and down
through menu items, previous entries on the
Home screen, and entries in the Data editor.
% # moves the cursor to the top entry of
the active column in Data editor, or to the
previous entry on the Home screen. Press
% # again to move the cursor to the
oldest entry on the Home screen.
In fractions, press % # < to paste a
previous entry to the denominator. (See
Chapter 6, Fractions, for more information.)
% $ moves the cursor to the first blank
row of the active column in Data editor, or
below the last entry on the Home screen.
8. q lets you set the angle, numeric, decimal,
display, and fraction modes. Press $ # ! "
to choose a mode, and < to select it.
Press - or %s to exit the mode
menu.
The default mode settings are shown:
9. % displays the Reset menu.
• Press 1 (No) to return to the previous
screen without resetting the calculator.
• Press 2 (Yes) to reset the calculator. The
message MEMORY CLEARED is
displayed.
6
4
1
5
2
3
9
8
7