manual

28 TI-34 MultiView: A Guide For Teachers © 2007 TEXAS INSTRUMENTS INCORPORATED
TI-34 MultiView™ basic operations (Continued)
• Resetting the calculator:
– Returns mode settings to their defaults:
degree angle mode (DEG), normal numeric
notation (NORM), floating decimal
notation (FLOAT), MathPrint™ display
mode, and fraction modes (Un/d and
MANSIMP).
– Clears memory variables, pending
operations, entries in history, statistical
data, stored operations, and ans (Last
answer).
Notes
• The examples on the transparency masters
assume all default settings.
• r can be used in an entry before pressing
<. Pressing r more than once in a
current entry may result in a Syntax error.
To achieve the desired result, you can:
– Enter the expression, press r <, and
then press r again after the result is
displayed.
– Enter the expression and press <, and
then press r as many times as desired
to toggle the display and view the
alternate format of the answer.
• When
³ or ´ appears in the display, the entry
line contains more characters to the left or
right.
• Press & after the Automatic Power Down™
(APD™) feature activates to restore power.
The display, pending operations, settings, and
memory are retained.