Operation Manual

Chapter 19: Communication Link 560
DuplicateName Menu
DuplicateName MenuDuplicateName Menu
DuplicateName Menu
During transmission, if a variable name is duplicated, the
DuplicateName menu is
displayed on the receiving unit.
When you select
1:Rename, the Name= prompt is displayed, and alpha-lock is on. Enter a
new variable name, and then press Í. Transmission resumes.
When you select
2:Overwrite, the sending unit’s data overwrites the existing data stored
on the receiving unit. Transmission resumes.
When you select
3:Omit, the sending unit does not send the data in the duplicated
variable name. Transmission resumes with the next item.
When you select
4:Quit, transmission stops, and the receiving unit exits receive mode.
Receiving from a TI-84 Plus Silver Edition or TI-84 Plus
Receiving from a TI-84 Plus Silver Edition or TI-84 PlusReceiving from a TI-84 Plus Silver Edition or TI-84 Plus
Receiving from a TI-84 Plus Silver Edition or TI-84 Plus
The TI-84 Plus Silver Edition and the TI-84 Plus are totally compatible. Keep in mind,
however that the TI-84 Plus has less Flash memory than a TI-84 Plus Silver Edition.
DuplicateName
1: Rename
Prompts to rename receiving variable.
2: Overwrite
Overwrites data in receiving variable.
3: Omit
Skips transmission of sending variable.
4: Quit
Stops transmission at duplicate variable.