Operation Manual

Chapter 9: Split Screen 143
Graph-Table Split Screen
Graph-Table Mode
In Graph-Table split-screen mode, a vertical line splits the screen into left and right halves.
The left half displays all active graphs and plots.
The right half displays either table data corresponding to the graph at the left or list data
corresponding to the plot at the left.
Moving from Graph View to Table View in Graph-Table Mode
To use the graph view (left side) of the split screen:
• Press s or r.
• Select a ZOOM or CALC operation or STAT CALC
D: Manual-Fit Y= mX+b or E: Quick Plot & Fit-EQ.
To use the table view (right side) of the split screen, press y 0. If the values on the right are list
data, these values can be edited similarly to using the Stat List Editor.
Using TRACE in Graph-Table Mode
As you press | or ~ to move the trace cursor along a graph in the split screen’s left half in Graph-Table
mode, the table on the right half automatically scrolls to match the current cursor values. If more than
one graph or plot is active, you can press } or † to select a different graph or plot.
Note: When you trace in Parametric graphing mode, both components of an equation (XnT and YnT)
are displayed in the two columns of the table. As you trace, the current value of the independent
variable T is displayed on the graph.
Full Screens in Graph-Table Mode
All screens other than the graph and the table are displayed as full screens in G-T split-screen mode.
To return to the
Graph-Table split screen from a full screen when in Graph-Table mode, press any key
or key combination that displays the graph or the table.