Operation Manual

Chapter 12: Statistics 205
The following screens demonstrate the STAT WIZARDS flow for a STAT CALC menu command.
If the STAT WIZARD mode option if OFF, for each STAT CALC menu item, if neither Xlistname nor
Ylistname is specified, then the default list names are L1 and L2. If you do not specify freqlist, then the
default is 1 occurrence of each list element.
Note: You can use the Catalog Help menu for more syntax help on 1-Var Stats. Press Ã, use the syntax
help editor to fill in the command and press F4 to paste.
1. Press press … ~ to select the STAT CALC menu.
Select
1 Í to select the 1-Var Stats menu.
2. The 1 -Var Stats wizard opens. Enter the values in
the wizard. Scroll down to Calculate and press
Í.
Note: In this example, data has been entered in L1.
FreqList is an optional argument.
3. The STAT CALC results are displayed.
4. Press † to scroll down through the data.
Note: This is a temporary view. Press 
5 to view
the statistic variables after clearing the temporary
result screen.
5. Press ‘ to clear the data from the screen.
6. Press } to view the populated command pasted.