Operation Manual

Chapter 16: Programming 291
TI-84 Plus C Key Code Diagram
ClrHome, ClrTable
ClrHome (clear home screen) clears the home screen during program execution.
ClrTable (clear table) clears the values in the table during program execution.
GetCalc(
GetCalc( gets the contents of variable on another TI-84 Plus C and stores it to variable on the receiving
TI-84 Plus C. variable can be a real or complex number, list element, list name, matrix element, matrix
name, string, Y= variable, graph database, or picture.
GetCalc(variable[,portflag])
By default, the TI-84 Plus C uses the USB port if it is connected. If the USB cable is not connected, it uses
the I/O port. If you want to specify either the USB or I/O port, use the following portflag numbers:
portflag=0 use USB port if connected;
portflag=1 use USB port;
portflag=2 use I/O port
Note:
GetCalc( does not work between TI.82 and TI-83 Plus or a TI.82, TI-84 Plus and TI-84 Plus C
calculators.
Get(, Send(
Get( gets data from the CBL 2™ or CBR™ data collection device and stores it to variable on the
receiving TI-84 Plus C.
variable can be a real number, list element, list name, matrix element, matrix
name, string, Y= variable, graph database, or picture.
Get(variable)
Note: If you transfer a program that references the Get( command to the TI-84 Plus C from a TI.82, the
TI-84 Plus C will interpret it as the
Get( described above. Use GetCalc( to get data from another
TI-84 Plus C.
Send( sends the contents of variable to the CBL 2™ or CBR™ data collection device. You cannot use it to
send to another TI-84 Plus C.
variable can be a real number, list element, list name, matrix element,
matrix name, string, Y= variable, graph database, or picture.
variable can be a list of elements.
Send(variable)
Note: This program gets sound data and time in
seconds from CBL 2™.