ti-cares@ti.com 5.38” 2.87” w w w. t i . c o m / c a l c TI-36X Solar, English Texas Instruments U.S.A. 7800 Banner Dr. Dallas, TX 75251 Texas Instruments Holland B.V.
TI.36X SOLAR Scientific Calculator Basic Operations ................................. Results .......................................... Basic Arithmetic .................................. Percents ......................................... Fractions ......................................... Powers and Roots ................................ Logarithmic Functions ............................ Angle Units ....................................... DMS .............................................
Basic Operations ¦ To turn on the TI-36X Solar, expose the solar panel to light and press !. Note: Always press ! to clear the calculator because memory and display may contain incorrect numbers. ¦ To turn off the TI-36X Solar, cover the solar panel with the slide case. ( selects the 2nd function of the next key pressed. " selects the 3rd function of the next key pressed. Third function Second function Primary function 3 x ex LN For example, 8 " ‚ finds the cube root of 8.
Basic Arithmetic D>82 O N 67 " 120. 60 D 5 8 12 O Completes all pending operations. With constant, repeats the operation and value. Changes sign of value just entered. 5. 1 D 8 N D 12 O In binary, octal, or hexadecimal mode, N calculates the 2’s complement of the number in the display. Parenthetical expression (up to 15 open for each pending operation). O closes all open parentheses. Pi is calculated with 12 digits (3.14159265359), displayed with 10 digits (3.141592654). 6.283185307 28"O 3 TI36XSUS.
Percents Percentage (5% of 250) 250 8 5 " ‡ O 0.05 12.5 Ratio (Ratio of 250 to 5) 250 2 5 " ‡ O 0.05 5000. Add-On (5% add-on of 250) 250 D 5 " ‡ O 12.5 262.5 Discount (5% discount on 250) 250 > 5 " ‡ O 12.5 237.5 4 TI36XSUS.
Fractions bFc Enters a proper or improper fraction, bàc (b { 6 digits, c { 3 digits). When possible, improper fractions are displayed as mixed numbers. 3F4 83O aFbFc (s "¡ 3¯4 2®1¯4 Single-variable functions display decimal results. 0.25 1F20 Enters the mixed fraction a bàc. (a, b, c { 3 digits each, with the total digits { 8). 6®4¯6 6F4F6 6®2¯3 O Toggles display between mixed number and improper fraction. 30¯4 30 F 4 (s 7®1¯2 (s 15¯2 7®1¯2 (s Toggles display between fraction and decimal.
Powers and Roots / 0 1 "‚ , (Y 8/D4/O 60D2O 256 1 D 4 1 O 8"‚D4O 5,3O 8(Y3O 0.375 38. 18. 6. 125. 2. Logarithmic Functions $ (R % (S 15.32 $ D 12.45 $ O 2 ( R > 10 0 O 15.32 % D 12.45 % O .693 ( S D1O 1.185258765 2.280428117 0. 2.729159164 5.250879787 1.999705661 2.999705661 (e=2.71828182846) 6 TI36XSUS.
Angle Units (Q " Cycles angle-unit setting between degrees, radians, and grads without affecting the displayed number. Cycles (converts) angle-unit setting between degrees, radians, and grads for display, entry, and calculation. 45 " " " DEG RAD GRAD DEG 45 0.785398163 50. 45. 7 TI36XSUS.
DMS Enter DMS (Degrees/Minutes/Seconds) values as D.MMSSs, using 0s as necessary: D . MM SS s degrees (0–7 digits) decimal-point separator minutes (must be 2 digits) seconds (must be 2 digits) fractional part of a second For example, enter 48¡5'3.5" as 48.05035. Before using a DMS value in a calculation, you must convert it to decimal with ( |. (| "ª Interprets display as DMS and converts it to decimal. 30.1525 30.09090 ( | Temporarily displays current value as DMS. 30¡09'09"0 30.1525 " ª 8 TI36XSUS.
Rectangular to Polar " © converts rectangular coordinates (x,y) to polar coordinates (r,q). Convert rectangular coordinates (10,8 ) to polar. ! or ( Q (if necessary) 10 . 8 " © (display r) . (display q) . (display r) DEG DEG DEG r DEG DEG r 8 12.80624847 38.65980825 12.80624847 Polar to Rectangular ( { converts polar coordinates (r,q) to rectangular coordinates (x,y). Convert polar coordinates (5,30) to rectangular. ! or ( Q (if necessary) 5 . 30 ( { (display x) . (display y) .
Trigonometric Functions Before using the trigonometric functions ( ), *, +, ( V, ( W, ( X), select DEG, RAD, or GRAD with ( Q. ( Q (if necessary) 90 ) > 30 * O 1(V > .5 O DEG DEG DEG DEG DEG DEG 1. 0.866025404 0.133974596 90. 89.5 Note: Before using a DMS (Degree/Minute/Second) value in a calculation, you must convert it to decimal with ( |. Hyperbolic Functions To access hyperbolic functions, press # and then the function ( # ), # *, # +, # ( V, # ( W, # ( X).
One-Variable Statistics "‰ ([ ! 4 (a (\ (g (h (] (_ (^ (b One-variable statistics mode. Clears all statistical data. Clears all statistical data, STAT mode, and memory. Enters data point. Removes data point. Adds or removes multiple occurrences of a data point. Enter data point, press ( \, enter frequency (1–99), press 4 to add or ( a to remove data points. Sum. Sum of squares. Mean. Population standard deviation (n weighting). Sample standard deviation (n-1 weighting). Number of data points.
Find the sum, mean, population standard deviation, and sample standard deviation for the data set: 45, 55, 55, 55, 60, 80. The last data point is erroneously entered as 8, removed with ( a, and then correctly entered as 80. "‰ ([ 45 4 55 ( \ 3 4 60 4 84 8(a 80 4 ( g (sum) ( ] (mean) ( h (sum of squares) ( _ (n weighting) ( ^ (n-1 weighting) STAT STAT STAT STAT STAT STAT STAT STAT STAT STAT STAT STAT STAT 0. 0. 1. 4. 5. 6. 5. 6. 350. 58.33333333 21100. 10.67187373 11.69045194 12 TI36XSUS.
Two-Variable Statistics " ([ ! Two-variable statistics mode. Clears all statistical data. Clears all statistical data, STAT mode, and memory. x . y 4 Enters data point. Removes data point. x.y (a (\ Adds or removes multiple occurrences of a data point. Enter data point, press ( \, enter frequency (1–99), press 4 to add or ( a to remove data points. ( g or Sum. (i ( h or Sum of squares. (j ( ] or Mean. (c ( _ or Population standard deviation (e (n weighting).
For trend-line analysis, enter 1st data point, and then enter just y values with 4. x is automatically incremented by 1. Linear Regression Example Predict y for x = 9, given (4,5), (4,5), (9,9), (2,3). Calculate correlation coefficient, slope, and intercept of the line, mean of x values, and mean of y values. " ([ 4.5(\24 9.94 2.
Probability A combination is an arrangement of objects in which order is not important, as in a hand of cards. " ¦ calculates the number of possible combinations of n items taken r at a time. Calculate the number of 5-card poker hands that can be dealt from a deck of 52 cards. 52 . 5 " ¦ O 2598960. A permutation is an arrangement of objects in which the order is important, as in a race. ( x calculates the number of possible permutations of n items taken r at a time.
Clearing and Correcting ! ' '' K 0:n " (TM ([ Clears display, errors, all pending operations, statistical data, STAT mode and memory. Sets DEG angle units, floating-decimal format. Clears value (before pressing operation key), display, errors, all pending operations. Does not affect mode, display format, angle units, memory, or statistical data. ' after 6, 7, ,, ( Y, 8, 2, D, or > clears the calculator as if you had pressed ' '. Clears display and all pending operations.
Physical Constants c speed of light g gravitational acceleration 299,792,458 meters per second 9.80665 meters per second 2 9.1093897Q 10 -31 kilograms 1.60217733Q 10 -19 coulombs h Planck’s constant 6.6260755Q 10 -34 Joule seconds NA Avogadro’s number 6.0221367Q 10 23 molecules per mole R ideal gas constant 8.31451 Joules per mole °Kelvin 6.67259 Q 10 -11 Newton G universal gravitation meters2 per kilogram 2 me electron mass e electron charge Press " U and then the appropriate constant key.
English/Metric Conversions English/metric conversions are available only in DEC. centimeters to inches inches to centimeters liters to U.S. liquid gallons U.S. liquid gallons to liters kilograms to pounds mass pounds to kilograms Celsius to Fahrenheit Fahrenheit to Celsius grams to ounces avoirdupois ounces avoirdupois to grams ( t cm P 2.54 " ¢ in Q 2.54 ( u l P 3.785411784 "£ gal Q 3.785411784 ( v kg P .45359237 "¤ (y "§ (z lb Q.45359237 °C Q 9/5 + 32 (°F - 32) Q 5/9 g P 28.349523125 " ¨ oz Q 28.
Constants (Repeated Operations) A constant contains an operation (+, -, Q, P, y x, ¬, AND, OR, XOR, or XNOR) and a value. O repeats the calculation. !, ' ', or a pending operation key clears the constant. Calculate 2 Q p, 4 Q p, and 8 Q p. 28"O 4O 8O 6.283185307 12.56637061 25.13274123 19 TI36XSUS.
Memory The TI-36X Solar has 3 memories. When a memory contains a number other than 0, M displays. To clear a single memory, press 0 : 1, 0 : 2, or 0 : 3. ! clears all three memories. :n @n Stores displayed value in memory n, replacing current value. 23 : 1 M D2O M Recalls value in memory n. 23. 25. (continued) (mn 23. @1 M 26. D3O M Adds displayed value to memory n. (continued) "›n 4. 4(m1 M 27. @1 M Exchanges displayed and memory values. (continued) 385O "›1 "›1 M M M 15. 27. 15. 20 TI36XSUS.
Order of Operations 1st 2nd 3rd 4th 5th 6th 7th 8th Expressions inside parentheses. Trigonometric, hyperbolic, square, square root, cube root, factorial, reciprocal, angle conversion, combinations, permutations, percent, logarithms, change sign, metric conversions, logical NOT. Universal powers and roots. Multiplication and division. Addition and subtraction. Logical AND. Logical OR, XOR, XNOR. O completes all operations. The TI-36X Solar uses the Algebraic Operating System (AOSé).
Number-System Modes " Selects decimal mode. " “ Selects binary (BIN) mode and converts the integer portion of the displayed number. You can enter positive binary numbers as large as 111111111 (9 digits). Numbers beyond this are interpreted as negative (2’s complement) numbers. " ’ Selects octal (OCT) mode and converts the integer portion of the displayed number. You can enter positive octal numbers as large as 3777777777. Numbers beyond this are interpreted as negative (2’s complement) numbers.
To enter the hexadecimal digits A through F, use the keys shown below. D C SIN -1 E g COS-1 SIN COS A FRQ 1àx h B NA x x2 F me TAN -1 TAN C R sx n-1 x B and D are shown as uppercase letters on the keyboard, but displayed as lowercase b and d. If you enter ABCD, for example, the display shows AbCd. To display the 2’s complement of the number in the display, press N. 23 TI36XSUS.
Boolean Logic Operations You can perform logical AND, OR, XOR, XNOR, and NOT operations in the decimal, binary, octal, and hexadecimal modes. Except for NOT, these functions compare the corresponding bits of two values. The result is displayed in the current number base. Note: Although the TI-36X Solar does not display leading zeros for integers, logical operations treat each value as a 10-digit binary number.
Notation " "Ÿ Selects scientific notation. 12345. 12345 O 1.2345 04 " Selects engineering notation (exponent is a multiple of 3). (continued) " (Tn 12.345 03 "Ÿ Restores standard notation (floatingdecimal) format. Sets decimal places to n (0–9), retaining notation format. (continued) 12.35 03 (T2O 12.3450 03 (T4O ( T M Removes fixed-decimal setting. 5 Enters exponent. You can enter a value in floating-decimal, fixeddecimal, or scientific notation, regardless of display format.
Display Indicators Calculator will access 2nd function (printed on top half of key) of next key pressed. Calculator will access 3rd function (printed 3rd above key) of next key pressed. Value other than 0 in memory. M Calculator will access hyperbolic function HYP of next key pressed. BIN, OCT, or Calculator is in binary, octal, or hexadecimal number mode. HEX Calculator is in 1-variable or 2-variable STAT statistics mode. DEG, RAD, or Specifies angle-unit setting (degrees, radians, or grads).
Error Conditions When Error appears in the display, the calculator will not accept a keyboard entry until you press ' to clear the error condition. (' ' clears the condition and all pending operations.) General errors ¦ Result larger than ±9.999999999 Q 10 99. ¦ Division by zero. ¦ More than 15 open parentheses or 4 pending operations (1 in STAT). ¦ Log, ln, or 1/x of 0. ¦ Log, ln, or ‡x of x < 0. ¦ Even root of a negative number. ¦ 0 to the 0th power, or 0th root of any number.
Statistical errors ¦ Data value x such that |x| ‚ 1 Q 1.0E64. ¦ Removing the only data value with ( a. ¦ v, w, sxn, syn, sxn-1, syn-1, correlation, intercept, slope, x', or y' with no data values or sxn-1 with one data value. ¦ Correlation, intercept, slope, x', or y' of a vertical line. ¦ Correlation or x' of a horizontal line. ¦ Correlation, slope, intercept, x', or y' with only one data point. Number mode errors ¦ Result outside range for that number mode.
TI Product, Service, and Warranty Information TI Product and Services Information For more information about TI products and services, contact TI by e-mail or visit the TI calculator home page on the world-wide web. e-mail address: ti-cares@ti.com internet address: http://www.ti.