User Guide
Table Of Contents
- Setting up the TI‑Nspire™ Navigator™ Teacher Software
- About the Hardware
- Before You Begin
- Charging the Cradles
- Updating the Handheld Operating System
- Connecting the TI‑Nspire™ Navigator™ Access Point
- Confirming Handheld OS Version
- Naming the Class Network
- Adding Wireless Clients to the Network
- Connecting the Handhelds to the Wireless Adapters
- Connecting the Handhelds to Cradles
- Creating and Managing Your Teacher Account
- Logging In to the TI‑Nspire™ Navigator™ System from the Handheld
- Storing the Wireless Adapters and Cradles
- Using TI‑Nspire™ Network Manager
- USA FCC Information Concerning Radio Frequency Interference
- Canadian IC Information
- Mexico - Declaration of Conformity
- European Union and EFTA Regulatory Compliance
- China SRRC CMIIT Identification
- Warning Statements
- Important for Safe AC Adapter Operation
52 Warning Statements
Warning Statements
Warning! Install the TI-Nspire™ Navigator™ Access Point or TI-Nspire™ CX
Navigator™ Access Point in such a manner as to maintain a minimum of 20 cm
(7.9 inches) separation distance between the radiating element(s) and all
persons. This safety warning conforms to FCC radio frequency exposure limits.
Warning! Do not touch or move the TI-Nspire™ Navigator™ Access Point or or
TI-Nspire™ CX Navigator™ Access Point when the antennas are transmitting or
receiving.
Warning! The TI-Nspire™ Navigator™ Access Point, TI-Nspire™ Navigator™
Wireless Cradle, TI-Nspire™ CX Wireless Network Adapter, TI-Nspire™ CX
Navigator™ Access Point, and TI-Nspire™ CX Wireless Network Adapter -
v2
are intended for indoor use only. Do not install the device nor operate it
outdoors.
Warning! Intentional radiators, such as the TI-Nspire™ Navigator™ Access
Point, TI-Nspire™ Navigator™ Wireless Cradle, TI-Nspire™ CX Wireless Network
Adapter. TI-Nspire™ CX Navigator™ Access Point, and TI-Nspire™ CX Wireless
Network Adapter -
v2
are not intended to be operated with any antenna(s) other
than those furnished by Texas Instruments. An intentional radiator may only be
operated with the antenna(s) with which it is authorized.
Warning! The TI-Nspire™ Navigator™ Access Point radio(s) and TI-Nspire™ CX
Navigator™ Access Point radio(s) are disabled by default and can be enabled
only by the system administrator using the Management software application.
Warning! The radio frequency band, operating channels, and transmit power
depend on the country of operation specified by the system administrator
during setup and configuration using the Management software.
Warning! Only qualified personnel must perform installation. Read and follow
all warning notices and instructions marked on the product or included in the
documentation
DRAFT