Application Guide

434 Data Collection
• When a delay countdown expires on a unit that supports a delayed start
Setting Up for Remote Collection
1. Save and close any open documents, and start with a new document.
2. Connect the remote collection unit to the computer or handheld.
3. Modifying Sensor Settings.
4. Click the Collection Setup button .
5. On the Collection Setup screen, check Enable Remote Collection.
6. Select the remote collection unit from the Devices list.
7. Specify the method for starting the collection:
• To start automatically after a specified delay (on supported units), type the
delay value.
• To start when you press the manual trigger (on supported units), type a delay
value of 0. When you use a delay, the manual trigger button on the TI-Nspire™
Lab Cradle has no effect on the start of the collection.
8. Click OK.
A message confirms that the unit is ready.