Datasheet

TL071, TL071A, TL071B
TL072, TL072A, TL072B, TL074, TL074A, TL074B
www.ti.com SLOS080L –SEPTEMBER 1978–REVISED FEBRUARY 2014
6 Specifications
6.1 Absolute Maximum Ratings
(1)
over operating free-air temperature range (unless otherwise noted)
VALUE UNIT
V
CC+
18
Supply voltage
(2)
V
V
CC–
–18
V
ID
Differential input voltage
(3)
±30 V
V
I
Input voltage
(2)(4)
±15 V
Duration of output short circuit
(5)
Unlimited
D package (8 pin) 97
D package (14 pin) 86
N package 80
NS package 76
θ
JA
Package thermal impedance
(6)(7)
P package 85 °C/W
PS package 95
PW package (8 pin) 149
PW package (14 pin) 113
U package 185
FK package 5.61
J package 15.05
θ
JC
Package thermal impedance
(8)(9)
°C/W
JG package 14.5
W package 14.65
T
J
Operating virtual junction temperature 150 °C
Case temperature for 60 seconds FK package 260 °C
Lead temperature 1,6 mm (1/16 inch) from case for 10
J, JG, or W package 300 °C
seconds
(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating
Conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) All voltage values, except differential voltages, are with respect to the midpoint between V
CC+
and V
CC−
.
(3) Differential voltages are at IN+, with respect to IN−.
(4) The magnitude of the input voltage must never exceed the magnitude of the supply voltage or 15 V, whichever is less.
(5) The output may be shorted to ground or to either supply. Temperature and/or supply voltages must be limited to ensure that the
dissipation rating is not exceeded.
(6) Maximum power dissipation is a function of T
J(max)
, θ
JA
, and T
A
. The maximum allowable power dissipation at any allowable ambient
temperature is P
D
= (T
J(max)
– T
A
)/θ
JA
. Operating at the absolute maximum T
J
of 150°C can affect reliability.
(7) The package thermal impedance is calculated in accordance with JESD 51-7.
(8) Maximum power dissipation is a function of T
J(max)
, θ
JC
, and T
C
. The maximum allowable power dissipation at any allowable ambient
temperature is P
D
= (T
J(max)
– T
C
)/θ
JC
. Operating at the absolute maximum T
J
of 150°C can affect reliability.
(9) The package thermal impedance is calculated in accordance with MIL-STD-883.
6.2 Handling Ratings
PARAMETER DEFINITION VALUE UNIT
T
stg
Storage temperature range –65 to 150 °C
Copyright © 1978–2014, Texas Instruments Incorporated Submit Documentation Feedback 5
Product Folder Links: TL071 TL071A TL071B TL072 TL072A TL072B TL074 TL074A TL074B