Datasheet
TL071, TL071A, TL071B, TL072
TL072A, TL072B, TL074, TL074A, TL074B
LOW-NOISE JFET-INPUT OPERATIONAL AMPLIFIERS
SLOS080D – SEPTEMBER 1978 – REVISED AUGUST 1996
1
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
Low Power Consumption
Wide Common-Mode and Differential
Voltage Ranges
Low Input Bias and Offset Currents
Output Short-Circuit Protection
Low Total Harmonic Distortion
0.003% Typ
Low Noise
V
n
= 18 nV/√Hz Typ at f = 1 kHz
High Input Impedance...JFET Input Stage
Internal Frequency Compensation
Latch-Up-Free Operation
High Slew Rate...13 V/µs Typ
Common-Mode Input Voltage Range
Includes V
CC+
description
The JFET-input operational amplifiers in the TL07_ series are designed as low-noise versions of the TL08_
series amplifiers with low input bias and offset currents and fast slew rate. The low harmonic distortion and low
noise make the TL07_ series ideally suited for high-fidelity and audio preamplifier applications. Each amplifier
features JFET inputs (for high input impedance) coupled with bipolar output stages integrated on a single
monolithic chip.
The C-suffix devices are characterized for operation from 0°C to 70°C. The I-suffix devices are characterized
for operation from –40°C to 85°C. The M-suffix devices are characterized for operation over the full military
temperature range of –55°C to 125°C.
AVAILABLE OPTIONS
PACKAGE
T
A
V
IO
max
AT 25°C
SMALL
OUTLINE
(D)
†
CHIP
CARRIER
(FK)
CERAMIC
DIP
(J)
CERAMIC
DIP
(JG)
PLASTIC
DIP
(N)
PLASTIC
DIP
(P)
TSSOP
PACKAGE
(PW)
FLAT
PACKAGE
(W)
10 mV TL071CD TL071CP TL071CPWLE
10
mV
6 mV
TL071CD
TL071ACD
— — — —
TL071CP
TL071ACP
TL071CPWLE
—
—
3 mV TL071BCD TL071BCP —
0°Cto
10 mV TL072CD TL072CP TL072CPWLE
0°C to
70
°
C
10
mV
6 mV
TL072CD
TL072ACD
— — — —
TL072CP
TL072ACP
TL072CPWLE
—
—
70°C
3 mV TL072BCD TL072BCP —
10 mV TL074CD TL074CN TL074CPWLE
10
mV
6 mV
TL074CD
TL074ACD
— — —
TL074CN
TL074ACN
—
TL074CPWLE
—
—
3 mV TL074BCD TL074BCN —
40°Cto
TL071ID — TL071IP
–40°C to
85
°
C
6 mV
TL071ID
TL072ID
— — —
—
TL071IP
TL072IP
— —
85°C
TL074ID TL074IN —
55
°
Cto
6 mV TL071MFK — TL071MJG — — —
–
55°C
t
o
125
°
C
6 mV
—
TL072MFK — TL072MJG — TL072MP
—
—
125 C
9 mV TL074MFK TL074MJ — TL074MN — TL074MW
†
The D package is available taped and reeled. Add the suffix R to the device type (e.g., TL071CDR). The PW package is only available left-ended
taped and reeled (e.g., TL072CPWLE).
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Copyright 1996, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.