Datasheet

ManualsBrandsTEXAS INSTRUMENTS ManualsLinear ICsLinear IC - Comparator Multi-purpose Complementary, Push pull, TTL SOIC 8

 

 

 



SLCS132C − MARCH 1997 − REVISED MAY 1997

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

D Ultra-Fast Operation . . . 10 ns (typ)

D Low Positive Supply Current

12.7 mA (Typ)

D Operates From a Single 5-V Supply or From

a Split ±5-V Supply

D Complementary Outputs

D Input Common-Mode Voltage Includes

Negative Rail

D Low Offset Voltage

D No Minimum Slew Rate Requirement

D Output Latch Capability

D Functional Replacement to the LT1116

description

The TL3116 is an ultra-fast comparator designed

to interface directly to TTL logic while operating

from either a single 5-V power supply or dual

±5-V supplies. The input common-mode voltage

extends to the negative rail for ground sensing

applications. It features extremely tight offset

voltage and high gain for precision applications. It

has complementary outputs that can be latched

using the LATCH ENABLE terminal. Figure 1

shows the positive supply current of the

comparator. The TL3116 only requires 12.7 mA

(typical) to achieve a propagation delay of 10 ns.

The TL3116 is a pin-for-pin functional replace-

ment for the LT1116 comparator, offering

high-speed operation but consuming much less

power.

AVAILABLE OPTIONS

PACKAGED DEVICES

CHIP

SMALL

OUTLINE

†

(D)

TSSOP

(PW)

CHIP

FORM

‡

(Y)

0°C to 70°C TL3116CD TL3116CPWLE TL3116Y

−40°C to 85°C TL3116ID TL3116IPWLE —

†

The PW packages are available left-ended taped and reeled only.

‡

Chip forms are tested at T

= 25°C only.

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications o

Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

D AND PW PACKAGE

(TOP VIEW)

CC+

IN+

IN−

CC−

Q OUT

GND

LATCH ENABLE

symbol (each comparator)

IN+

IN−

Figure 1

−50 −25 0 25 50 75 100 125

POSITIVE SUPPLY CURRENT

FREE-AIR TEMPERATURE

− Positive Supply Current − mA

− Free-Air Temperature − °C

OUT

Q OUT

= ± 5 V



   ! "#$ !  %#&'" ($)

(#"! "  !%$""! %$ *$ $!  $+! !#$!

!(( ,-) (#" %"$!!. ($!  $"$!!'- "'#($

$!.  '' %$$!)

Summary of content (17 pages)

PAGE 1
SLCS132C − MARCH 1997 − REVISED MAY 1997 D Ultra-Fast Operation . . . 10 ns (typ) D Low Positive Supply Current D AND PW PACKAGE (TOP VIEW) 12.
PAGE 2
SLCS132C − MARCH 1997 − REVISED MAY 1997 TL3116Y chip information This chip, when properly assembled, displays characteristics similar to the TL3116C. Thermal compression or ultrasonic bonding may be used on the doped-aluminum bonding pads. Chips may be mounted with conductive epoxy or a gold-silicon preform.
PAGE 3
SLCS132C − MARCH 1997 − REVISED MAY 1997 absolute maximum ratings over operating free-air temperature range (unless otherwise noted)† Supply voltage, VDD (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . − 7 V to 7 V Differential input voltage, VID (see Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 4
SLCS132C − MARCH 1997 − REVISED MAY 1997 electrical characteristics at specified operating free-air temperature, VDD = ±5 V, VLE = 0 (unless otherwise noted) TEST CONDITIONS† PARAMETER TL3116C MIN TYP‡ MAX TA = 25°C TA = full range 0.5 MIN 3 TL3116I TYP‡ 0.5 MAX 3 VIO Input offset voltage αVIO Temperature coefficient of input offset voltage Input offset current TA = 25°C TA = full range 0.
PAGE 5
SLCS132C − MARCH 1997 − REVISED MAY 1997 switching characteristics, VDD = ±5 V, VLE = 0 tpd1 tsk(p) Propagation delay time‡ Pulse skew (|tpd+ − tpd−|) TL3116C TEST CONDITIONS† PARAMETER MIN TL3116I TYP MAX MIN TYP MAX ∆VI = 100 mV, VOD = 5 mV TA = 25°C TA = full range 9.9 12 9.9 12 9.9 14 9.9 15 ∆VI = 100 mV, VOD = 20 mV TA = 25°C TA = full range 8.2 10.3 8.2 10.3 8.2 12.7 8.2 13.
PAGE 6
SLCS132C − MARCH 1997 − REVISED MAY 1997 TYPICAL CHARACTERISTICS POSITIVE SUPPLY CURRENT vs FREQUENCY POSITIVE SUPPLY CURRENT vs INPUT VOLTAGE I CC − Positive Supply Current − mA 18 16 ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ 24 VCC = ± 5 V TA = 25°C 22 I CC − Positive Supply Current − mA 20 14 TA = 85°C 12 TA = 25°C 10 TA = − 40°C 8 6 4 20 ÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎÎÎ VCC = ± 5 V TA = 25°C TA = 85°C 18 TA = 25°C 16 14 TA = − 40°C 12 2 10 0 1 2 3 4 5 6 VI − Input Voltag
PAGE 7
SLCS132C − MARCH 1997 − REVISED MAY 1997 TYPICAL CHARACTERISTICS PROPAGATION DELAY TIME vs OVERDRIVE VOLTAGE PROPAGATION DELAY TIME vs SUPPLY VOLTAGE ÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎÎÎ 12 ÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎÎÎ 12 10 VCC = ± 5 V TA = 25°C t pd − Propagation Delay Time − ns t pd − Propagation Delay Time − ns VCC = ± 5 V TA = 25°C 8 6 4 2 0 0 10 20 40 30 10 8 6 4 2 0 4.4 50 4.6 4.
PAGE 8
SLCS132C − MARCH 1997 − REVISED MAY 1997 TYPICAL CHARACTERISTICS PROPAGATION DELAY TIME vs FREE-AIR TEMPERATURE COMMON-MODE INPUT VOLTAGE vs FREE-AIR TEMPERATURE ÎÎÎÎÎ 25 ÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎ 6 VCC = 5 V (Upper Limit) VCC = ± 5 V (Upper Limit) VIC − Common-Mode Input Voltage − V t pd − Propagation Delay Time − ns VCC = ± 5 V 20 15 Rising Edge 10 Falling Edge 5 4 2 ÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎ 0 VCC = 5 V (Lower Limit) −2 ÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎ −
PAGE 9
SLCS132C − MARCH 1997 − REVISED MAY 1997 TYPICAL CHARACTERISTICS OUTPUT VOLTAGE vs OUTPUT SINK CURRENT 1.8 VO − Output Voltage − V 1.6 ÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎÎÎ 1.4 1.2 TA = 25°C 1 TA = − 40°C 0.8 0.6 TA = 85°C 0.4 0.
PAGE 10
PACKAGE OPTION ADDENDUM www.ti.
PAGE 11
PACKAGE OPTION ADDENDUM www.ti.com 2-Oct-2013 (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
PAGE 12
PACKAGE MATERIALS INFORMATION www.ti.com 14-Jul-2012 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant TL3116CDR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 TL3116CPWR TSSOP PW 8 2000 330.0 12.4 7.0 3.6 1.6 8.0 12.0 Q1 TL3116IDR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 TL3116IPWR TSSOP PW 8 2000 330.
PAGE 13
PACKAGE MATERIALS INFORMATION www.ti.com 14-Jul-2012 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) TL3116CDR SOIC D 8 2500 367.0 367.0 35.0 TL3116CPWR TSSOP PW 8 2000 367.0 367.0 35.0 TL3116IDR SOIC D 8 2500 367.0 367.0 35.0 TL3116IPWR TSSOP PW 8 2000 367.0 367.0 35.
PAGE 14
PAGE 15
PAGE 16
PAGE 17
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.