Datasheet

ManualsBrandsTEXAS INSTRUMENTS ManualsPMICsPMIC - LDO voltage regulator Positive, fixed TO 220 3

(1) The common terminal is in electrical contact with the mounting base.

OUTPUT

COMMON

INPUT

COMMON

KTT PACKAGE

(TOP VIEW)

(1)

OUTPUT

COMMON

INPUT

KCS PACKAGE

(TOP VIEW)

(1)

OUTPUT

COMMON

INPUT

COMMON

KVU PACKAGE

(TOP VIEW)

(1)

TL750M SERIES

www.ti.com

............................................................................................................................................. SLVS021M –JANUARY 1988–REVISED OCTOBER 2009

LOW-DROPOUT VOLTAGE REGULATORS

FEATURES

• Very Low Dropout Voltage, Less Than 0.6 V at • Overvoltage Protection

750 mA

• Internal Thermal-Overload Protection

• Low Quiescent Current

• Internal Overcurrent-Limiting Circuitry

• 60-V Load-Dump Protection

DESCRIPTION/ORDERING INFORMATION

The TL750M series devices are low-dropout positive voltage regulators specifically designed for battery-powered

systems. The TL750M devices incorporate onboard overvoltage and current-limiting protection circuitry to protect

the devices and the regulated system. The devices are fully protected against 60-V load-dump and

reverse-battery conditions. Extremely low quiescent current, even during full-load conditions, makes the TL750M

series ideal for standby power systems.

The TL750M offers 5-V, 8-V, 10-V, and 12-V options. The devices are characterized for operation over the virtual

junction temperature range 0°C to 125°C.

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas

Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

PRODUCTION DATA information is current as of publication date.

Products conform to specifications per the terms of the Texas

Instruments standard warranty. Production processing does not

necessarily include testing of all parameters.

Summary of content (21 pages)

PAGE 1
TL750M SERIES www.ti.com ............................................................................................................................................. SLVS021M – JANUARY 1988 – REVISED OCTOBER 2009 LOW-DROPOUT VOLTAGE REGULATORS FEATURES 1 • • • Very Low Dropout Voltage, Less Than 0.
PAGE 2
TL750M SERIES SLVS021M – JANUARY 1988 – REVISED OCTOBER 2009 ............................................................................................................................................. www.ti.
PAGE 3
TL750M SERIES www.ti.com .............................................................................................................................................
PAGE 4
TL750M SERIES SLVS021M – JANUARY 1988 – REVISED OCTOBER 2009 ............................................................................................................................................. www.ti.com TL750M05 ELECTRICAL CHARACTERISTICS (1) VI = 14 V, IO = 300 mA, TJ = 25°C (unless otherwise noted) PARAMETER Output voltage Input voltage regulation TEST CONDITIONS TJ = 0°C to 125°C 5 5.05 5.1 10 25 12 50 IO = 5 mA to 750 mA (1) 4.
PAGE 5
TL750M SERIES www.ti.com ............................................................................................................................................. SLVS021M – JANUARY 1988 – REVISED OCTOBER 2009 TL750M10 ELECTRICAL CHARACTERISTICS (1) VI = 14 V, IO = 300 mA, TJ = 25°C (unless otherwise noted) PARAMETER Output voltage Input voltage regulation TEST CONDITIONS TJ = 0°C to 125°C 10 10.1 10.2 15 43 20 75 IO = 5 mA to 750 mA (1) 9.
PAGE 6
TL750M SERIES SLVS021M – JANUARY 1988 – REVISED OCTOBER 2009 ............................................................................................................................................. www.ti.com PARAMETER MEASUREMENT INFORMATION The TL750Mxx is a low-dropout regulator. This means that the capacitance loading is important to the performance of the regulator because it is a vital part of the control loop.
PAGE 7
TL750M SERIES www.ti.com ............................................................................................................................................. SLVS021M – JANUARY 1988 – REVISED OCTOBER 2009 TYPICAL CHARACTERISTICS Table 2.
PAGE 8
TL750M SERIES SLVS021M – JANUARY 1988 – REVISED OCTOBER 2009 ............................................................................................................................................. www.ti.
PAGE 9
TL750M SERIES www.ti.com ............................................................................................................................................. SLVS021M – JANUARY 1988 – REVISED OCTOBER 2009 VO − Output Voltage − mV 20 mV/DIV LINE TRANSIENT RESPONSE 200 100 0 − 100 − 200 150 VI(NOM) = VO + 1 V ESR = 2 CL = 10 µF TJ = 25°C 100 50 0 0 50 100 150 200 t − Time − µs Figure 9.
PAGE 10
PACKAGE OPTION ADDENDUM www.ti.
PAGE 11
PACKAGE OPTION ADDENDUM www.ti.com 7-Jun-2010 (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
PAGE 12
PACKAGE MATERIALS INFORMATION www.ti.com 25-Sep-2009 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant TL750M05CKTTR DDPAK/ TO-263 KTT 3 500 330.0 24.4 10.6 15.8 4.9 16.0 24.0 Q2 TL750M05CKVURG3 PFM KVU 3 2500 330.0 TL750M08CKVURG3 PFM KVU 3 2500 330.0 16.4 6.9 10.5 2.7 8.0 16.0 Q2 16.4 6.9 10.5 2.7 8.0 16.
PAGE 13
PACKAGE MATERIALS INFORMATION www.ti.com 25-Sep-2009 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) TL750M05CKTTR DDPAK/TO-263 KTT 3 500 340.0 340.0 38.0 TL750M05CKVURG3 PFM KVU 3 2500 340.0 340.0 38.0 TL750M08CKVURG3 PFM KVU 3 2500 340.0 340.0 38.0 TL750M10CKVURG3 PFM KVU 3 2500 340.0 340.0 38.0 TL750M12CKVURG3 PFM KVU 3 2500 340.0 340.0 38.
PAGE 14
MECHANICAL DATA MPFM001E – OCTOBER 1994 – REVISED JANUARY 2001 KTE (R-PSFM-G3) PowerFLEX PLASTIC FLANGE-MOUNT 0.375 (9,52) 0.080 (2,03) 0.070 (1,78) 0.365 (9,27) 0.360 (9,14) 0.050 (1,27) 0.040 (1,02) 0.350 (8,89) 0.220 (5,59) NOM 0.010 (0,25) NOM Thermal Tab (See Note C) 0.360 (9,14) 0.350 (8,89) 0.295 (7,49) NOM 0.320 (8,13) 0.310 (7,87) 0.420 (10,67) 0.410 (10,41) 1 3 0.025 (0,63) 0.031 (0,79) 0.100 (2,54) Seating Plane 0.004 (0,10) 0.010 (0,25) M 0.005 (0,13) 0.001 (0,03) 0.
PAGE 15
MECHANICAL DATA MPSF001F – JANUARY 1996 – REVISED JANUARY 2002 KTP (R-PSFM-G2) PowerFLEX PLASTIC FLANGE-MOUNT PACKAGE 0.080 (2,03) 0.070 (1,78) 0.243 (6,17) 0.233 (5,91) 0.228 (5,79) 0.218 (5,54) 0.050 (1,27) 0.040 (1,02) 0.010 (0,25) NOM 0.130 (3,30) NOM 0.215 (5,46) NOM 0.247 (6,27) 0.237 (6,02) Thermal Tab (See Note C) 0.287 (7,29) 0.277 (7,03) 0.381 (9,68) 0.371 (9,42) 0.100 (2,54) 0.090 (2,29) 0.032 (0,81) MAX Seating Plane 0.090 (2,29) 0.180 (4,57) 0.004 (0,10) 0.005 (0,13) 0.
PAGE 16
PAGE 17
PAGE 18
PAGE 19
PAGE 20
PAGE 21
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.