Datasheet
+
–
TLC080 , TLC081, TLC082
TLC083, TLC084, TLC085, TLC08xA
www.ti.com
SLOS254F –JUNE 1999– REVISED DECEMBER 2011
FAMILY OF WIDE-BANDWIDTH HIGH-OUTPUT-DRIVE SINGLE SUPPLY
OPERATIONAL AMPLIFIERS
Check for Samples: TLC080 , TLC081, TLC082, TLC083, TLC084, TLC085, TLC08xA
1
FEATURES
DESCRIPTION
The first members of TI’s new BiMOS
23
• Wide Bandwidth: 10 MHz
general-purpose operational amplifier family are the
• High Output Drive:
TLC08x. The BiMOS family concept is simple:
– I
OH
: 57 mA at V
DD
– 1.5 V
provide an upgrade path for BiFET users who are
moving away from dual-supply to single-supply
– I
OL
: 55 mA at 0.5 V
systems and demand higher ac and dc performance.
• High Slew Rate:
With performance rated from 4.5 V to 16 V across
– SR+: 16 V/µs
commercial (0°C to 70°C) and an extended industrial
temperature range (–40°C to 125°C), BiMOS suits a
– SR–: 19 V/µs
wide range of audio, automotive, industrial, and
• Wide Supply Range: 4.5 V to 16 V
instrumentation applications. Familiar features like
• Supply Current: 1.9 mA/Channel
offset nulling pins, and new features like MSOP
PowerPAD™ packages and shutdown modes, enable
• Ultralow Power Shutdown Mode:
higher levels of performance in a variety of
– I
DD
: 125 µA/Channel
applications.
• Low Input Noise Voltage: 8.5 nV√Hz
Developed in TI’s patented LBC3 BiCMOS process,
• Input Offset Voltage: 60 µV
the new BiMOS amplifiers combine a very high input
• Ultra-Small Packages:
impedance, low-noise CMOS front end with a
high-drive bipolar output stage, thus providing the
– 8- or 10-Pin MSOP (TLC080/1/2/3)
optimum performance features of both. AC
performance improvements over the TL08x BiFET
predecessors include a bandwidth of 10 MHz (an
increase of 300%) and voltage noise of 8.5 nV/√Hz
(an improvement of 60%). DC improvements include
an ensured V
ICR
that includes ground, a factor of 4
reduction in input offset voltage down to 1.5 mV
(maximum) in the standard grade, and a power
supply rejection improvement of greater than 40 dB to
130 dB. Added to this list of impressive features is
the ability to drive ±50-mA loads comfortably from an
ultrasmall-footprint MSOP PowerPAD package, which
positions the TLC08x as the ideal high-performance
general-purpose operational amplifier family.
FAMILY PACKAGE TABLE
PACKAGE TYPES
NO. OF UNIVERSAL
DEVICE
CHANNELS EVM BOARD
MSOP PDIP SOIC TSSOP SHUTDOWN
TLC080 1 8 8 8 — Yes
TLC081 1 8 8 8 —
Refer to the EVM
TLC082 2 8 8 8 — —
Selection Guide
TLC083 2 10 14 14 — Yes
(Lit# SLOU060)
TLC084 4 14 14 20 —
TLC085 4 16 16 20 Yes
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2PowerPAD is a trademark of Texas Instruments.
3All other trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Copyright © 1999–2011, Texas Instruments Incorporated
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.