Datasheet

ManualsBrandsTEXAS INSTRUMENTS ManualsLinear ICsLinear IC - Op-amp Multi-purpose SOIC 8

TLC252, TLC252A, TLC252B, TLC252Y, TLC25L2, TLC25L2A, TLC25L2B

TLC25L2Y, TLC25M2, TLC25M2A, TLC25M2B, TLC25M2Y

LinCMOS DUAL OPERATIONAL AMPLIFIERS

SLOS002I – JUNE 1983 – REVISED MARCH 2001

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

A-Suffix Versions Offer 5-mV V

B-Suffix Versions Offer 2-mV V

Wide Range of Supply Voltages

1.4 V to 16 V

True Single-Supply Operation

Common-Mode Input Voltage Includes the

Negative Rail

Low Noise . . . 30 nV/√Hz Typ at f = 1 kHz

(High-Bias Versions)

description

The TLC252, TLC25L2, and TLC25M2 are

low-cost, low-power dual operational amplifiers

designed to operate with single or dual supplies.

These devices utilize the Texas Instruments

silicon gate LinCMOS process, giving them stable input offset voltages that are available in selected grades

of 2, 5, or 10 mV maximum, very high input impedances, and extremely low input offset and bias currents.

Because the input common-mode range extends to the negative rail and the power consumption is extremely

low, this series is ideally suited for battery-powered or energy-conserving applications. The series offers

operation down to a 1.4-V supply, is stable at unity gain, and has excellent noise characteristics.

These devices have internal electrostatic-discharge (ESD) protection circuits that prevent catastrophic failures

at voltages up to 2000 V as tested under MIL-STD-883C, Method 3015.1. However, care should be exercised

in handling these devices as exposure to ESD may result in a degradation of the device parametric

performance.

AVAILABLE OPTIONS

max

PACKAGED DEVICES

CHIP FORM

max

AT 25°C

SMALL OUTLINE

(D)

PLASTIC DIP

(P)

TSSOP

(PW)

CHIP

FORM

(Y)

10 mV TLC252CD TLC252CP TLC252CPW

TLC252Y

5 mV

TLC252CD

TLC252ACD

TLC252CP

TLC252ACP

TLC252CPW

TLC252ACPW

—

2 mV TLC252BCD TLC252BCP TLC252BCPW

—

10 mV TLC25L2CD TLC25L2CP TLC25L2CPW

TLC25L2Y

0°C to 70°C

5 mV

TLC25L2CD

TLC25L2ACD

TLC25L2CP

TLC25L2ACP

TLC25L2CPW

TLC25L2ACPW

—

2 mV TLC25L2BCD TLC25L2BCP TLC25L2BCPW

—

10 mV TLC25M2CD TLC25M2CP — TLC25M2Y

5 mV TLC25M2ACD TLC25M2ACP — —

2 mV TLC25M2BCD TLC25M2BCP — —

The D package is available taped and reeled. Add the suffix R to the device type (e.g., TLC252CDR). Chips are tested at 25°C.

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of

Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

PRODUCTION DATA information is current as of publication date.

Products conform to specifications per the terms of Texas Instruments

standard warranty. Production processing does not necessarily include

testing of all parameters.

1OUT

1IN–

1IN+

DD–

/GND

2OUT

2IN–

2IN+

PACKAGE

(TOP VIEW)

ymbol (each amplifier)

–

OUT

IN+

IN–

LinCMOS is a trademark of Texas Instruments.

Summary of content (27 pages)

PAGE 1
TLC252, TLC252A, TLC252B, TLC252Y, TLC25L2, TLC25L2A, TLC25L2B TLC25L2Y, TLC25M2, TLC25M2A, TLC25M2B, TLC25M2Y LinCMOS DUAL OPERATIONAL AMPLIFIERS SLOS002I – JUNE 1983 – REVISED MARCH 2001 D D D D D D D, P, OR PW PACKAGE (TOP VIEW) A-Suffix Versions Offer 5-mV VIO B-Suffix Versions Offer 2-mV VIO Wide Range of Supply Voltages 1.4 V to 16 V True Single-Supply Operation Common-Mode Input Voltage Includes the Negative Rail Low Noise . . .
PAGE 2
TLC252, TLC252A, TLC252B, TLC252Y, TLC25L2, TLC25L2A, TLC25L2B TLC25L2Y, TLC25M2, TLC25M2A, TLC25M2B, TLC25M2Y LinCMOS DUAL OPERATIONAL AMPLIFIERS SLOS002I – JUNE 1983 – REVISED MARCH 2001 description (continued) Because of the extremely high input impedance and low input bias and offset currents, applications for the TLC252/ 25_2 series include many areas that have previously been limited to BIFET and NFET product types.
PAGE 3
TLC252, TLC252A, TLC252B, TLC252Y, TLC25L2, TLC25L2A, TLC25L2B TLC25L2Y, TLC25M2, TLC25M2A, TLC25M2B, TLC25M2Y LinCMOS DUAL OPERATIONAL AMPLIFIERS SLOS002I – JUNE 1983 – REVISED MARCH 2001 TLC252Y, TLC25L2Y, and TLC25M2Y chip information These chips, properly assembled, display characteristics similar to the TLC252 / 25_2. Thermal compression or ultrasonic bonding may be used on the doped-aluminum bonding pads. Chips may be mounted with conductive epoxy or a gold-silicon preform.
PAGE 4
TLC252, TLC252A, TLC252B, TLC252Y, TLC25L2, TLC25L2A, TLC25L2B TLC25L2Y, TLC25M2, TLC25M2A, TLC25M2B, TLC25M2Y LinCMOS DUAL OPERATIONAL AMPLIFIERS SLOS002I – JUNE 1983 – REVISED MARCH 2001 absolute maximum ratings over operating free-air temperature range (unless otherwise noted)† Supply voltage, VDD (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 V Differential input voltage, VID (see Note 2) . . . . . . . . . . . . .
PAGE 5
TLC252, TLC252A, TLC252B, TLC252Y, TLC25L2, TLC25L2A, TLC25L2B TLC25L2Y, TLC25M2, TLC25M2A, TLC25M2B, TLC25M2Y LinCMOS DUAL OPERATIONAL AMPLIFIERS SLOS002I – JUNE 1983 – REVISED MARCH 2001 electrical characteristics at specified free-air temperature, VDD = 1.4 V (unless otherwise noted) PARAMETER TLC25_2C VIO Input offset voltage TLC25_2AC TLC252_C TEST CONDITIONS† 2V VO = 0 0.
PAGE 6
TLC252, TLC252A, TLC252B, TLC252Y, TLC25L2, TLC25L2A, TLC25L2B TLC25L2Y, TLC25M2, TLC25M2A, TLC25M2B, TLC25M2Y LinCMOS DUAL OPERATIONAL AMPLIFIERS SLOS002I – JUNE 1983 – REVISED MARCH 2001 electrical characteristics at specified free-air temperature, VDD = 5 V (unless otherwise noted) PARAMETER TEST CONDITIONS TA† TLC252C, TLC252AC, TLC252BC MIN TLC252C VIO Input offset voltage VO = 1.4 V,, RS = 50 Ω, VIC = 0,, RL = 10 kΩ VIC = 0,, RL = 10 kΩ Full range TLC252BC VO = 1.
PAGE 7
TLC252, TLC252A, TLC252B, TLC252Y, TLC25L2, TLC25L2A, TLC25L2B TLC25L2Y, TLC25M2, TLC25M2A, TLC25M2B, TLC25M2Y LinCMOS DUAL OPERATIONAL AMPLIFIERS SLOS002I – JUNE 1983 – REVISED MARCH 2001 electrical characteristics at specified free-air temperature, VDD = 10 V (unless otherwise noted) PARAMETER TA† TEST CONDITIONS TLC252C, TLC252AC, TLC252BC MIN TLC252C VIO Input offset voltage VO = 1.4 V,, RS = 50 Ω, VIC = 0,, RL = 10 kΩ Full range TLC252BC VO = 1.
PAGE 8
TLC252, TLC252A, TLC252B, TLC252Y, TLC25L2, TLC25L2A, TLC25L2B TLC25L2Y, TLC25M2, TLC25M2A, TLC25M2B, TLC25M2Y LinCMOS DUAL OPERATIONAL AMPLIFIERS SLOS002I – JUNE 1983 – REVISED MARCH 2001 operating characteristics, VDD = 5 V PARAMETER TEST CONDITIONS TA TLC252C, TLC252AC, TLC252BC MIN VI(PP) ( )=1V SR Slew rate at unity gain RL = 10 kΩ,, See Figure 1 CL = 20 pF,, VI(PP) ( ) = 2.
PAGE 9
TLC252, TLC252A, TLC252B, TLC252Y, TLC25L2, TLC25L2A, TLC25L2B TLC25L2Y, TLC25M2, TLC25M2A, TLC25M2B, TLC25M2Y LinCMOS DUAL OPERATIONAL AMPLIFIERS SLOS002I – JUNE 1983 – REVISED MARCH 2001 electrical characteristics at specified free-air temperature, VDD = 5 V (unless otherwise noted) PARAMETER TA† TEST CONDITIONS TLC25L2C TLC25L2AC TLC25L2BC MIN VIO Input offset voltage VO = 1.4 V,, RS = 50 Ω, VIC = 0,, RL = 1 MΩ Full range TLC252AC VO = 1.
PAGE 10
TLC252, TLC252A, TLC252B, TLC252Y, TLC25L2, TLC25L2A, TLC25L2B TLC25L2Y, TLC25M2, TLC25M2A, TLC25M2B, TLC25M2Y LinCMOS DUAL OPERATIONAL AMPLIFIERS SLOS002I – JUNE 1983 – REVISED MARCH 2001 electrical characteristics at specified free-air temperature, VDD = 10 V (unless otherwise noted) PARAMETER TEST CONDITIONS TA† TLC25L2C TLC25L2AC TLC25L2BC MIN VIO Input offset voltage VO = 1.4 V,, RS = 50 Ω, VIC = 0,, RL = 1 MΩ Full range TLC252AC VO = 1.
PAGE 11
TLC252, TLC252A, TLC252B, TLC252Y, TLC25L2, TLC25L2A, TLC25L2B TLC25L2Y, TLC25M2, TLC25M2A, TLC25M2B, TLC25M2Y LinCMOS DUAL OPERATIONAL AMPLIFIERS SLOS002I – JUNE 1983 – REVISED MARCH 2001 operating characteristics, VDD = 5 V PARAMETER TEST CONDITIONS TA TLC25L2C TLC25L2AC TLC25L2BC MIN VI(PP) ( )=1V SR Slew rate at unity gain RL = 1 MΩ,, See Figure 1 CL = 20 pF,, VI(PP) ( ) = 2.
PAGE 12
TLC252, TLC252A, TLC252B, TLC252Y, TLC25L2, TLC25L2A, TLC25L2B TLC25L2Y, TLC25M2, TLC25M2A, TLC25M2B, TLC25M2Y LinCMOS DUAL OPERATIONAL AMPLIFIERS SLOS002I – JUNE 1983 – REVISED MARCH 2001 electrical characteristics at specified free-air temperature, VDD = 5 V (unless otherwise noted) PARAMETER TEST CONDITIONS TA† TLC25M2C TLC25M2AC TLC25M2BC MIN VIO Input offset voltage VO = 1.4 V,, RS = 50 Ω, VIC = 0,, RL = 100 kΩ Full range TLC252AC VO = 1.
PAGE 13
TLC252, TLC252A, TLC252B, TLC252Y, TLC25L2, TLC25L2A, TLC25L2B TLC25L2Y, TLC25M2, TLC25M2A, TLC25M2B, TLC25M2Y LinCMOS DUAL OPERATIONAL AMPLIFIERS SLOS002I – JUNE 1983 – REVISED MARCH 2001 electrical characteristics at specified free-air temperature, VDD = 10 V (unless otherwise noted) PARAMETER TA† TEST CONDITIONS TLC25M2C TLC25M2AC TLC25M2BC MIN VIO Input offset voltage VO = 1.4 V,, RS = 50 Ω, VIC = 0,, RL = 100 kΩ Full range TLC252AC VO = 1.
PAGE 14
TLC252, TLC252A, TLC252B, TLC252Y, TLC25L2, TLC25L2A, TLC25L2B TLC25L2Y, TLC25M2, TLC25M2A, TLC25M2B, TLC25M2Y LinCMOS DUAL OPERATIONAL AMPLIFIERS SLOS002I – JUNE 1983 – REVISED MARCH 2001 operating characteristics, VDD = 5 V PARAMETER TEST CONDITIONS TA TLC25M2C TLC25M2AC TLC25M2BC MIN VI(PP) ( )=1V SR Slew rate at unity gain RL = 100 kΩ,, See Figure 1 CL = 20 pF,, VI(PP) ( ) = 2.
PAGE 15
TLC252, TLC252A, TLC252B, TLC252Y, TLC25L2, TLC25L2A, TLC25L2B TLC25L2Y, TLC25M2, TLC25M2A, TLC25M2B, TLC25M2Y LinCMOS DUAL OPERATIONAL AMPLIFIERS SLOS002I – JUNE 1983 – REVISED MARCH 2001 electrical characteristics, VDD = 5 V, TA = 25°C PARAMETER TEST CONDITIONS VO = 1.4 V, RS = 50 Ω, TLC252Y MIN VIC = 0 V, See Note 6 TLC25L2Y TYP MAX 1.1 10 MIN TLC25M2Y TYP MAX 1.1 10 MIN TYP MAX 1.
PAGE 16
TLC252, TLC252A, TLC252B, TLC252Y, TLC25L2, TLC25L2A, TLC25L2B TLC25L2Y, TLC25M2, TLC25M2A, TLC25M2B, TLC25M2Y LinCMOS DUAL OPERATIONAL AMPLIFIERS SLOS002I – JUNE 1983 – REVISED MARCH 2001 PARAMETER MEASUREMENT INFORMATION single-supply versus split-supply test circuits Because the TLC252, TLC25L2, and TLC25M2 are optimized for single-supply operation, circuit configurations used for the various tests often present some inconvenience since the input signal, in many cases, must be offset from ground.
PAGE 17
TLC252, TLC252A, TLC252B, TLC252Y, TLC25L2, TLC25L2A, TLC25L2B TLC25L2Y, TLC25M2, TLC25M2A, TLC25M2B, TLC25M2Y LinCMOS DUAL OPERATIONAL AMPLIFIERS SLOS002I – JUNE 1983 – REVISED MARCH 2001 TYPICAL CHARACTERISTICS Table of Graphs FIGURE IDD Supply current AVD Large-signal differential voltage amplification Phase shift vs Supplyy voltage g vs Free-air temperature 4 5 Low bias vs Frequency 6 Medium bias vs Frequency 7 High bias vs Frequency 8 Low bias vs Frequency 6 Medium bias vs Frequen
PAGE 18
TLC252, TLC252A, TLC252B, TLC252Y, TLC25L2, TLC25L2A, TLC25L2B TLC25L2Y, TLC25M2, TLC25M2A, TLC25M2B, TLC25M2Y LinCMOS DUAL OPERATIONAL AMPLIFIERS SLOS002I – JUNE 1983 – REVISED MARCH 2001 TYPICAL CHARACTERISTICS LOW-BIAS LARGE-SIGNAL DIFFERENTIAL VOLTAGE AMPLIFICATION AND PHASE SHIFT vs FREQUENCY VDD = 10 V RL = 1 MΩ TA = 25°C 106 105 30° AVD (left scale) 104 60° 103 90° Phase Shift (right scale) 102 ÁÁ ÁÁ ÁÁ 0° 120° 101 150° 1 180° Phase Shift AVD AVD – Low-Bias Large-Signal Differentia
PAGE 19
TLC252, TLC252A, TLC252B, TLC252Y, TLC25L2, TLC25L2A, TLC25L2B TLC25L2Y, TLC25M2, TLC25M2A, TLC25M2B, TLC25M2Y LinCMOS DUAL OPERATIONAL AMPLIFIERS SLOS002I – JUNE 1983 – REVISED MARCH 2001 TYPICAL CHARACTERISTICS HIGH-BIAS LARGE-SIGNAL DIFFERENTIAL VOLTAGE AMPLIFICATION AND PHASE SHIFT vs FREQUENCY ÁÁ ÁÁ VDD = 10 V RL = 10 kΩ TA = 25°C 106 105 0° 30° 104 60° Phase Shift (right scale) 103 90° 102 120° Phase Shift AVD AVD – High-Bias Large-Signal Differential Voltage Amplification 107 AVD (lef
PAGE 20
TLC252, TLC252A, TLC252B, TLC252Y, TLC25L2, TLC25L2A, TLC25L2B TLC25L2Y, TLC25M2, TLC25M2A, TLC25M2B, TLC25M2Y LinCMOS DUAL OPERATIONAL AMPLIFIERS SLOS002I – JUNE 1983 – REVISED MARCH 2001 APPLICATION INFORMATION latch-up avoidance Junction-isolated CMOS circuits have an inherent parasitic PNPN structure that can function as an SCR. Under certain conditions, this SCR may be triggered into a low-impedance state, resulting in excessive supply current. To avoid such conditions, no voltage greater than 0.
PAGE 21
PACKAGE OPTION ADDENDUM www.ti.
PAGE 22
PACKAGE OPTION ADDENDUM www.ti.
PAGE 23
PACKAGE OPTION ADDENDUM www.ti.
PAGE 24
PACKAGE OPTION ADDENDUM www.ti.com 31-Oct-2013 Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties.
PAGE 25
PACKAGE MATERIALS INFORMATION www.ti.com 17-Aug-2012 TAPE AND REEL INFORMATION *All dimensions are nominal Device TLC252CDR Package Package Pins Type Drawing SOIC SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 TLC252CDR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 TLC252CPWR TSSOP PW 8 2000 330.0 12.4 7.0 3.6 1.6 8.0 12.0 Q1 TLC25L2CDR SOIC D 8 2500 330.
PAGE 26
PACKAGE MATERIALS INFORMATION www.ti.com 17-Aug-2012 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) TLC252CDR SOIC D 8 2500 340.5 338.1 20.6 TLC252CDR SOIC D 8 2500 367.0 367.0 35.0 TLC252CPWR TSSOP PW 8 2000 367.0 367.0 35.0 TLC25L2CDR SOIC D 8 2500 340.5 338.1 20.6 TLC25L2CPWR TSSOP PW 8 2000 367.0 367.0 35.0 TLC25M2CDR SOIC D 8 2500 340.5 338.1 20.
PAGE 27
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.