TLC4501, TLC4501A, TLC4502, TLC4502A FAMILY OF SELF-CALIBRATING (Self-Cal) PRECISION CMOS RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS SLOS221B – MAY 1998 – REVISED APRIL 2001 D D D D D D D D D D D D Self-Calibrates Input Offset Voltage to 40 µV Max Low Input Offset Voltage Drift . . . 1 µV/°C Input Bias Current . . . 1 pA Open Loop Gain . . . 120 dB Rail-To-Rail Output Voltage Swing Stable Driving 1000 pF Capacitive Loads Gain Bandwidth Product . . . 4.7 MHz Slew Rate . . . 2.
TLC4501, TLC4501A, TLC4502, TLC4502A FAMILY OF SELF-CALIBRATING (Self-Cal) PRECISION CMOS RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS SLOS221B – MAY 1998 – REVISED APRIL 2001 description (continued) Using this technology eliminates the need for noisy and expensive chopper techniques, laser trimming, and power hungry, split supply bipolar operational amplifiers.
TLC4501, TLC4501A, TLC4502, TLC4502A FAMILY OF SELF-CALIBRATING (Self-Cal) PRECISION CMOS RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS SLOS221B – MAY 1998 – REVISED APRIL 2001 absolute maximum ratings over operating free-air temperature range (unless otherwise noted)† Supply voltage, VDD + (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V Differential input voltage, VID (see Note 2) . . . . . . . . . . . . . . . . . . . .
TLC4501, TLC4501A, TLC4502, TLC4502A FAMILY OF SELF-CALIBRATING (Self-Cal) PRECISION CMOS RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS SLOS221B – MAY 1998 – REVISED APRIL 2001 electrical characteristics at specified free-air temperature, VDD = 5 V, GND = 0 (unless otherwise noted) PARAMETER VIO Input offset voltage αVIO Temperature coefficient of input offset voltage IIO Input offset current IIB Input bias current VOH High-level output voltage TEST CONDITIONS VDD = ± 2.
TLC4501, TLC4501A, TLC4502, TLC4502A FAMILY OF SELF-CALIBRATING (Self-Cal) PRECISION CMOS RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS SLOS221B – MAY 1998 – REVISED APRIL 2001 operating characteristics, VDD = 5 V PARAMETER SR Slew rate at unity gain Vn Equivalent input noise voltage VN(PP) Peak-to-peak equivalent input noise q voltage In Equivalent input noise current THD + N BOM ts φm TEST CONDITIONS VO = 0 0.5 5 V to 2 2.
TLC4501, TLC4501A, TLC4502, TLC4502A FAMILY OF SELF-CALIBRATING (Self-Cal) PRECISION CMOS RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS SLOS221B – MAY 1998 – REVISED APRIL 2001 electrical characteristics at specified free-air temperature, VDD = 5 V, GND = 0 (unless otherwise noted) PARAMETER VIO Input offset voltage αVIO Temperature coefficient of input offset voltage TEST CONDITIONS VDD = ± 2.
TLC4501, TLC4501A, TLC4502, TLC4502A FAMILY OF SELF-CALIBRATING (Self-Cal) PRECISION CMOS RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS SLOS221B – MAY 1998 – REVISED APRIL 2001 operating characteristics, VDD = 5 V PARAMETER SR Slew rate at unity gain Vn Equivalent input noise voltage VN(PP) Peak-to-peak equivalent input noise q voltage In Equivalent input noise current THD + N BOM ts φm TEST CONDITIONS VO = 0 0.5 5 V to 2 2.
TLC4501, TLC4501A, TLC4502, TLC4502A FAMILY OF SELF-CALIBRATING (Self-Cal) PRECISION CMOS RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS SLOS221B – MAY 1998 – REVISED APRIL 2001 electrical characteristics at specified free-air temperature, VDD = 5 V, GND = 0 (unless otherwise noted) PARAMETER VIO Input offset voltage αVIO Temperature coefficient of input offset voltage IIO Input offset current IIB Input bias current VOH High-level output voltage TEST CONDITIONS VDD = ± 2.5 V,, VIC = 0, VDD = ± 2.
TLC4501, TLC4501A, TLC4502, TLC4502A FAMILY OF SELF-CALIBRATING (Self-Cal) PRECISION CMOS RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS SLOS221B – MAY 1998 – REVISED APRIL 2001 operating characteristics, VDD = 5 V PARAMETER SR Slew rate at unity gain Vn Equivalent input noise voltage VN(PP) Peak-to-peak equivalent q input noise voltage In Equivalent input noise current THD + N BOM ts φm TEST CONDITIONS VO = 0.5 V to 2.
TLC4501, TLC4501A, TLC4502, TLC4502A FAMILY OF SELF-CALIBRATING (Self-Cal) PRECISION CMOS RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS SLOS221B – MAY 1998 – REVISED APRIL 2001 TYPICAL CHARACTERISTICS Table of Graphs FIGURE 2, 3, 4 VIO Input offset voltage αVIO Input offset voltage temperature coefficient Distribution VOH VOL High-level output voltage vs High-level output current 8 Low-level output voltage vs Low-level output current 9 VO(PP) IOS Maximum peak-to-peak output voltage vs Frequenc
TLC4501, TLC4501A, TLC4502, TLC4502A FAMILY OF SELF-CALIBRATING (Self-Cal) PRECISION CMOS RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS SLOS221B – MAY 1998 – REVISED APRIL 2001 TYPICAL CHARACTERISTICS DISTRIBUTION OF TLC4502 INPUT OFFSET VOLTAGE 486 Amplifier From 8 Wafer Lot VDD = ± 2.5 V TA = 25°C 12 14 Percentage of Amplifiers – % 12 10 8 6 4 10 8 6 4 2 2 VIO – Input Offset Voltage – µV 10 8 6 4 60 50 40 50 0 –50 –100 50 40 30 –200 20 0 10 –150 0 30 100 2 –10 VDD = ± 2.
TLC4501, TLC4501A, TLC4502, TLC4502A FAMILY OF SELF-CALIBRATING (Self-Cal) PRECISION CMOS RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS SLOS221B – MAY 1998 – REVISED APRIL 2001 TYPICAL CHARACTERISTICS DISTRIBUTION OF TLC4502 INPUT OFFSET VOLTAGE TEMPERATURE COEFFICIENT 20 30 Amplifiers From 1 Wafer Lot VDD = ± 2.5 V TA = 25°C To –40°C 30 Amplifiers From 1 Wafer Lot VDD = ± 2.
TLC4501, TLC4501A, TLC4502, TLC4502A FAMILY OF SELF-CALIBRATING (Self-Cal) PRECISION CMOS RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS SLOS221B – MAY 1998 – REVISED APRIL 2001 TYPICAL CHARACTERISTICS SHORT-CIRCUIT OUTPUT CURRENT vs FREE-AIR TEMPERATURE 10 69 VDD = 5 V I OS – Short-Circuit Output Current – mA VO(PP) – Maximum Peak-To-Peak Output Voltage – V MAXIMUM PEAK-TO-PEAK OUTPUT VOLTAGE vs FREQUENCY 8 6 4 2 0 100 1k 10 k 100 k 1M 67 65 IOS– 63 61 59 57 55 –50 10 M IOS+ f – Frequency
TLC4501, TLC4501A, TLC4502, TLC4502A FAMILY OF SELF-CALIBRATING (Self-Cal) PRECISION CMOS RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS SLOS221B – MAY 1998 – REVISED APRIL 2001 TYPICAL CHARACTERISTICS LARGE-SIGNAL DIFFERENTIAL VOLTAGE AMPLIFICATION AND PHASE MARGIN vs FREQUENCY 80 180° Voltage Amplification – dB AVD – Large-Signal Differential 60 135° 40 90° 20 45° 0 0° –20 –40 1k – 45° 10 k 100 k 1M 10 M – 90° 100 M f – Frequency – Hz Figure 14 OUTPUT IMPEDANCE vs FREQUENCY 1000 z O –
TLC4501, TLC4501A, TLC4502, TLC4502A FAMILY OF SELF-CALIBRATING (Self-Cal) PRECISION CMOS RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS SLOS221B – MAY 1998 – REVISED APRIL 2001 TYPICAL CHARACTERISTICS COMMON-MODE REJECTION RATIO vs FREQUENCY COMMON-MODE REJECTION RATIO vs FREE-AIR TEMPERATURE 130 VDD = 5 V VIC = 2.
TLC4501, TLC4501A, TLC4502, TLC4502A FAMILY OF SELF-CALIBRATING (Self-Cal) PRECISION CMOS RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS SLOS221B – MAY 1998 – REVISED APRIL 2001 TYPICAL CHARACTERISTICS VOLTAGE-FOLLOWER LARGE-SIGNAL PULSE RESPONSE 4.5 4.5 4 4 3.5 3.5 VO – Output Voltage – V VO – Output Voltage – V INVERTING LARGE-SIGNAL PULSE RESPONSE 3 2.5 2 VDD = 5 V RL = 1 kΩ CL = 100 pF AV = –1 TA = 25°C 1.5 1 3 2.5 2 VDD = 5 V RL = 1 kΩ CL = 100 pF AV = 1 TA = 25°C 1.5 1 0.5 0.
TLC4501, TLC4501A, TLC4502, TLC4502A FAMILY OF SELF-CALIBRATING (Self-Cal) PRECISION CMOS RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS SLOS221B – MAY 1998 – REVISED APRIL 2001 TYPICAL CHARACTERISTICS EQUIVALENT INPUT NOISE VOLTAGE vs FREQUENCY INPUT NOISE VOLTAGE OVER A 10-SECOND PERIOD 1200 VDD = 5 V RS = 20 Ω TA = 25°C 90 VDD = 5 V f = 0.
TLC4501, TLC4501A, TLC4502, TLC4502A FAMILY OF SELF-CALIBRATING (Self-Cal) PRECISION CMOS RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS SLOS221B – MAY 1998 – REVISED APRIL 2001 TYPICAL CHARACTERISTICS PHASE MARGIN vs LOAD CAPACITANCE GAIN MARGIN vs LOAD CAPACITANCE 90 30 TA 25°C 25 75 Rnull = 50 Ω Gain Margin – dB Phase Margin 60 Rnull = 20 Ω 45 30 50 kΩ 50 kΩ 15 VI Rnull = 0 CL 0 100 1k 10 k CL – Load Capacitance – pF 10 100 k 100 1k 10 k CL – Load Capacitance – pF 10 Figure 28 CALIBRAT
TLC4501, TLC4501A, TLC4502, TLC4502A FAMILY OF SELF-CALIBRATING (Self-Cal) PRECISION CMOS RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS SLOS221B – MAY 1998 – REVISED APRIL 2001 TYPICAL CHARACTERISTICS CALIBRATION TIME AT 85°C 0 0 VO – Output Voltage – V 0.5 –0.5 –1 –1.5 VDD = 2.5 V GND = –2.5 V RL = 1 kΩ to GND AV = –1 VI = 0 –2 –2.5 –0.5 –1 –1.5 VDD = 2.5 V GND = –2.5 V RL = 1 kΩ to GND AV = –1 VI = 0 –2 –2.
TLC4501, TLC4501A, TLC4502, TLC4502A FAMILY OF SELF-CALIBRATING (Self-Cal) PRECISION CMOS RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS SLOS221B – MAY 1998 – REVISED APRIL 2001 APPLICATION INFORMATION D D D D D The TLC4502 is designed to operate with only a single 5-V power supply, have true differential inputs, and remain in the linear mode with an input common-mode voltage of 0. The TLC4502 has a standard dual-amplifier pinout, allowing for easy design upgrades.
TLC4501, TLC4501A, TLC4502, TLC4502A FAMILY OF SELF-CALIBRATING (Self-Cal) PRECISION CMOS RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS SLOS221B – MAY 1998 – REVISED APRIL 2001 VDD POWER-ON RESET S Q R Q ENABLE COUNTER RC OSCILLATOR RCO – CAL CLOCK RESET DAC SAR CORE AMPLIFIER + LPF RCO Figure 35.
TLC4501, TLC4501A, TLC4502, TLC4502A FAMILY OF SELF-CALIBRATING (Self-Cal) PRECISION CMOS RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS SLOS221B – MAY 1998 – REVISED APRIL 2001 APPLICATION INFORMATION The key operational-amplifier parameters CMRR, PSRR, and offset drift were optimized to achieve superior offset performance.
TLC4501, TLC4501A, TLC4502, TLC4502A FAMILY OF SELF-CALIBRATING (Self-Cal) PRECISION CMOS RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS SLOS221B – MAY 1998 – REVISED APRIL 2001 APPLICATION INFORMATION R1 R2 R3 R4 R5 R6 90 kΩ 9 kΩ 1 kΩ 1 kΩ 9 kΩ 90 kΩ V(REF)+ V(REF)– Gain = 10 Gain = 100 Gain = 100 Gain = 10 VDD 0.
TLC4501, TLC4501A, TLC4502, TLC4502A FAMILY OF SELF-CALIBRATING (Self-Cal) PRECISION CMOS RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS SLOS221B – MAY 1998 – REVISED APRIL 2001 APPLICATION INFORMATION 3 + 1/2 TLC4502 2 R3 R5 1 – R1 VI RG 2 – 1/2 TLC4502 R2 3 6 + – 1/2 TLC4502 5 VO 1 R4 7 + ǒ Ǔǒ R6 V V(REF) O + VI R5 R3 Where : R1 2R1 R G Ǔ ) 1 ) V(REF) + R2, R3 + R4, Figure 38.
TLC4501, TLC4501A, TLC4502, TLC4502A FAMILY OF SELF-CALIBRATING (Self-Cal) PRECISION CMOS RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS SLOS221B – MAY 1998 – REVISED APRIL 2001 APPLICATION INFORMATION 2 – 1/2 TLC4502 3 VI 1 VO + V I + VO Figure 40. Voltage-Follower Circuit VI 2 – 30 mA 1/2 TLC4502 3 1 β ≥ 20 600 mA 100 Ω + Figure 41. Lamp-Driver Circuit 2 – 1/2 TLC4502 3 1 + RL 240 Ω Figure 42.
TLC4501, TLC4501A, TLC4502, TLC4502A FAMILY OF SELF-CALIBRATING (Self-Cal) PRECISION CMOS RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS SLOS221B – MAY 1998 – REVISED APRIL 2001 APPLICATION INFORMATION IO + 3 VI 1/2 TLC4502 2 I 1 – + RVI O RE E Figure 43. High-Compliance Current-Sink Circuit 2 VI – 1/2 TLC4502 R1 10 kΩ 3 V(REF) 1 VO + R2 10 MΩ Figure 44. Comparator With Hysteresis Circuit IB 6 2 – 3 1/2 TLC4502 IB 1/2 TLC4502 VI – 5 1 + C1 1 µF + ZI Figure 45.
TLC4501, TLC4501A, TLC4502, TLC4502A FAMILY OF SELF-CALIBRATING (Self-Cal) PRECISION CMOS RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS SLOS221B – MAY 1998 – REVISED APRIL 2001 APPLICATION INFORMATION macromodel information Macromodel information provided was derived using Microsim Parts Release 8, the model generation software used with Microsim PSpice .
PACKAGE OPTION ADDENDUM www.ti.
PACKAGE OPTION ADDENDUM www.ti.
PACKAGE OPTION ADDENDUM www.ti.
PACKAGE OPTION ADDENDUM www.ti.
PACKAGE OPTION ADDENDUM www.ti.com 25-Sep-2013 In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
PACKAGE MATERIALS INFORMATION www.ti.com 14-Jul-2012 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant TLC4501AIDR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 TLC4501IDR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 TLC4502ACDR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 TLC4502AIDR SOIC D 8 2500 330.
PACKAGE MATERIALS INFORMATION www.ti.com 14-Jul-2012 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) TLC4501AIDR SOIC D 8 2500 367.0 367.0 35.0 TLC4501IDR SOIC D 8 2500 367.0 367.0 35.0 TLC4502ACDR SOIC D 8 2500 367.0 367.0 35.0 TLC4502AIDR SOIC D 8 2500 367.0 367.0 35.0 TLC4502CDR SOIC D 8 2500 367.0 367.0 35.0 TLC4502IDR SOIC D 8 2500 367.0 367.0 35.
MECHANICAL DATA MCER001A – JANUARY 1995 – REVISED JANUARY 1997 JG (R-GDIP-T8) CERAMIC DUAL-IN-LINE 0.400 (10,16) 0.355 (9,00) 8 5 0.280 (7,11) 0.245 (6,22) 1 0.063 (1,60) 0.015 (0,38) 4 0.065 (1,65) 0.045 (1,14) 0.310 (7,87) 0.290 (7,37) 0.020 (0,51) MIN 0.200 (5,08) MAX Seating Plane 0.130 (3,30) MIN 0.023 (0,58) 0.015 (0,38) 0°–15° 0.100 (2,54) 0.014 (0,36) 0.008 (0,20) 4040107/C 08/96 NOTES: A. B. C. D. E. All linear dimensions are in inches (millimeters).
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.