Datasheet

ManualsBrandsTEXAS INSTRUMENTS ManualsLogic ICsLogic IC - Latch D latch Three-state TSSOP 20

CLR

GND

CLK

TLC59213

TLC59213A

www.ti.com

SLVS867A –MAY 2009–REVISED MARCH 2010

8-BIT PARALLEL IN/OUT DARLINGTON SOURCE DRIVER WITH LATCH

Check for Samples: TLC59213, TLC59213A

FEATURES

APPLICATIONS

• Lamp and Display (LED)

• Output Current on Each Channel

OUT

Max = –500 mA)

• Hammer

• Relay

• V

CE(sus)

= 13.2 V

• Input Compatible With TTL/5-V CMOS

N OR PW PACKAGE

• Clear (CLR) and Clock (CLK) TTL/CMOS

(TOP VIEW)

Control Inputs

• CLR Control Input to Off the Output

• Darlington Source Driver

• Clock Input Up to 1 MHz

• Enhanced Hold Time (t

) on TLC59213A

• Temperature Range: –40°C to 85°C

DESCRIPTION

The TLC59213 and TLC59213A are 8-bit source drivers with input latch with CLK input and CLR to set the

output OFF. The TLC59213 and TLC59213A have large output source currents up to 500 mA with Darlington

transistor and collectors tied to V

. These feature make the device optimum level of driving the matrix of ink jet

printer head, LEDs, and the scan-side of resistor's matrix. The TLC59213 and TLC59213A differ only in the Data

Hold Time Specification (t

The clamp diode is between output and ground for switching inductive load.

All inputs are TTL/CMOS, which enable to any logic-level inputs such as MCU, CPU or SN74LV594 (serial to

parallel) and the output enable LED matrix display. It can also be used with another device sink driver such as

TLC59210, TLC59211 and TLC59212.

ORDERING INFORMATION

(1)

PACKAGE

(2)

ORDERABLE PART NUMBER TOP-SIDE MARKING

PDIP – N Tube of 20 TLC59213IN TLC59213IN

TSSOP – PW Reel of 2000 TLC59213IPWR Y59213

–40°C to 85°C PDIP – N Tube of 20 TLC59213AIN TLC59213AIN

Reel of 2000 TLC59213AIPWR

TSSOP – PW Y59213A

Reel of 250 TLC59213AIPWT

(1) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI

web site at www.ti.com.

(2) Package drawings, thermal data, and symbolization are available at www.ti.com/packaging.

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas

Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

PRODUCTION DATA information is current as of publication date.

Products conform to specifications per the terms of the Texas

Instruments standard warranty. Production processing does not

necessarily include testing of all parameters.

Summary of content (13 pages)

PAGE 1
TLC59213 TLC59213A www.ti.com SLVS867A – MAY 2009 – REVISED MARCH 2010 8-BIT PARALLEL IN/OUT DARLINGTON SOURCE DRIVER WITH LATCH Check for Samples: TLC59213, TLC59213A FEATURES APPLICATIONS • • • • 1 • • • • • • • • Output Current on Each Channel (IOUT Max = –500 mA) VCE(sus) = 13.
PAGE 2
TLC59213 TLC59213A SLVS867A – MAY 2009 – REVISED MARCH 2010 www.ti.
PAGE 3
TLC59213 TLC59213A www.ti.com SLVS867A – MAY 2009 – REVISED MARCH 2010 RECOMMENDED OPERATING CONDITIONS CONDITIONS VCC Supply voltage VIH High-level input voltage VIL Low-level input voltage UNIT 4.5 13.2 V V 0.
PAGE 4
TLC59213 TLC59213A SLVS867A – MAY 2009 – REVISED MARCH 2010 www.ti.com ELECTRICAL CHARACTERISTICS over recommended operating free-air temperature range (unless otherwise noted) PARAMETER ICEX TEST CONDITIONS Output leakage current MIN TYP MAX VCC = 13.2 V, Outputs off 2 IOUT = –350 mA 2.35 IOUT = –225 mA 2.15 IOUT = –100 mA 1.96 VCE(sus) Output saturation voltage II Input current VCC = 13.2 V, VI = 0 or 13.2 V Vf Clamp forward voltage If = –350 mA ICC Supply current VCC = 13.
PAGE 5
TLC59213 TLC59213A www.ti.com SLVS867A – MAY 2009 – REVISED MARCH 2010 THERMAL INFORMATION MAXIMUM OUTPUT CURRENT vs DUTY CYCLE 550 TA = 85°C Maximum Output Current, IO (mA) 500 N = Number of outputs conducting simultaneously 450 400 350 N=1 N=2 300 N=3 250 200 150 N=8 N=7 100 N=6 N=5 50 N=4 0 0 10 20 30 40 50 60 Duty Cycle (%) 70 80 90 100 Figure 1.
PAGE 6
TLC59213 TLC59213A SLVS867A – MAY 2009 – REVISED MARCH 2010 www.ti.com PARAMETER MEASUREMENT INFORMATION Test Point From Output Under Test RL = 25 Ω CL (See Note A) TEST CIRCUIT 3V CLR 1.5 V tsu GND 3V 1.5 V D 1.5 V tsu GND th tf tr 90% 1.5 V 10% 90% tw 3V 1.5 V 10% tPLH 50% CLK GND tPHL VOH 50% 50% Y GND VOLTAGE WAVEFORMS A. CL includes probe and jig capacitance. B.
PAGE 7
TLC59213 TLC59213A www.ti.com SLVS867A – MAY 2009 – REVISED MARCH 2010 APPLICATION INFORMATION CPU I/O CLR D1 D2 D3 D4 D5 D6 D7 D8 CLK 1 20 2 19 3 18 4 17 5 16 6 15 7 14 8 13 9 12 VCC Y1 Y2 Y3 Y4 Y5 Y6 Y7 Y8 11 10 TLC59213 8-Channel Sink Driver GND Figure 4.
PAGE 8
PACKAGE OPTION ADDENDUM www.ti.
PAGE 9
PACKAGE MATERIALS INFORMATION www.ti.com 14-Jul-2012 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing TLC59213AIPWR TSSOP PW 20 TLC59213AIPWT TSSOP PW TLC59213IPWR TSSOP PW SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant 2000 330.0 16.4 6.95 7.1 1.6 8.0 16.0 Q1 20 250 180.0 16.4 6.95 7.1 1.6 8.0 16.0 Q1 20 2000 330.0 16.4 6.95 7.1 1.6 8.0 16.
PAGE 10
PACKAGE MATERIALS INFORMATION www.ti.com 14-Jul-2012 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) TLC59213AIPWR TSSOP PW 20 2000 367.0 367.0 38.0 TLC59213AIPWT TSSOP PW 20 250 210.0 185.0 35.0 TLC59213IPWR TSSOP PW 20 2000 367.0 367.0 38.
PAGE 11
PAGE 12
PAGE 13
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46C and to discontinue any product or service per JESD48B. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.