Datasheet

ManualsBrandsTEXAS INSTRUMENTS ManualsPMICsPMIC - system monitor Reset/power-on reset SOIC 8

DRB PACKAGE

TLC7701, TLC7725, TLC7703

TLC7733, TLC7705

www.ti.com

SLVS087M –DECEMBER 1994–REVISED MARCH 2012

Micropower Supply Voltage Supervisors

Check for Samples: TLC7701, TLC7725, TLC7703 , TLC7733, TLC7705

FEATURES

• Power-On Reset Generator

• Automatic Reset Generation After Voltage

Drop

• Precision Voltage Sensor

• Temperature-Compensated Voltage Reference

• Programmable Delay Time by External

Capacitor

• Supply Voltage Range . . . 2 V to 6 V

• Defined RESET Output from V

≥ 1 V

• Power-Down Control Support for Static RAM

With Battery Backup

• Maximum Supply Current of 16 µA

• Power Saving Totem-Pole Outputs

• Temperature Range . . . Up to –55°C to 125°C

APPLICATIONS

• Medical Imaging

DESCRIPTION

The TLC77xx family of micropower supply voltage

supervisors provide reset control, primarily in

microcomputer and microprocessor systems.

During power-on, RESET is asserted when V

reaches 1 V. After minimum V

(≥2 V) is

established, the circuit monitors SENSE voltage and

keeps the reset outputs active as long as SENSE

voltage (V

I(SENSE)

) remains below the threshold

voltage. An internal timer delays return of the output

to the inactive state to ensure proper system reset.

The delay time, t

, is determined by an external

capacitor:

= 2.1 × 10

× C

Where

is in farads

is in seconds

SPACER

Except for the TLC7701, which can be customized with two external resistors, each supervisor has a fixed sense

threshold voltage set by an internal voltage divider. When SENSE voltage drops below the threshold voltage, the

outputs become active and stay in that state until SENSE voltage returns above threshold voltage and the delay

time, t

, has expired.

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of

Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

PRODUCTION DATA information is current as of publication date.

Products conform to specifications per the terms of the Texas

Instruments standard warranty. Production processing does not

necessarily include testing of all parameters.

Summary of content (36 pages)

PAGE 1
TLC7701, TLC7725, TLC7703 TLC7733, TLC7705 www.ti.com SLVS087M – DECEMBER 1994 – REVISED MARCH 2012 Micropower Supply Voltage Supervisors Check for Samples: TLC7701, TLC7725, TLC7703 , TLC7733, TLC7705 FEATURES 1 • • • • • • • • • • • DRB PACKAGE Power-On Reset Generator Automatic Reset Generation After Voltage Drop Precision Voltage Sensor Temperature-Compensated Voltage Reference Programmable Delay Time by External Capacitor Supply Voltage Range . . .
PAGE 2
TLC7701, TLC7725, TLC7703 TLC7733, TLC7705 SLVS087M – DECEMBER 1994 – REVISED MARCH 2012 www.ti.com These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates. DESCRIPTION (CONTINUED) In addition to the power-on-reset and undervoltage-supervisor function, the TLC77xx adds power-down control support for static RAM.
PAGE 3
TLC7701, TLC7725, TLC7703 TLC7733, TLC7705 www.ti.com SLVS087M – DECEMBER 1994 – REVISED MARCH 2012 LOGIC SYMBOL (1) This symbol is in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12.
PAGE 4
TLC7701, TLC7725, TLC7703 TLC7733, TLC7705 SLVS087M – DECEMBER 1994 – REVISED MARCH 2012 www.ti.
PAGE 5
TLC7701, TLC7725, TLC7703 TLC7733, TLC7705 www.ti.com SLVS087M – DECEMBER 1994 – REVISED MARCH 2012 ABSOLUTE MAXIMUM RATINGS (1) over operating free-air temperature range (unless otherwise noted) VDD Supply voltage (2) Input voltage range, CONTROL, RESIN, SENSE (2) VALUE UNIT 7 V –0.
PAGE 6
TLC7701, TLC7725, TLC7703 TLC7733, TLC7705 SLVS087M – DECEMBER 1994 – REVISED MARCH 2012 www.ti.com ELECTRICAL CHARACTERISTICS over recommended operating conditions (1) (unless otherwise noted) PARAMETER High-level output voltage VOH TEST CONDITIONS IOH = –20 µA IOH = 2 –mA Low-Level output voltage VOL IOL = 20 µA IOL = 2 mA VDD = 2 V 1.8 VDD = 2.7 V 2.5 VDD = 4.5 V 4.3 VDD = 4.5 V 3.7 MAX 0.2 0.2 VDD = 4.5 V 0.2 VDD = 4.5 V V 0.5 1.04 1.1 1.16 2.18 2.25 2.32 2.56 2.63 2.
PAGE 7
TLC7701, TLC7725, TLC7703 TLC7733, TLC7705 www.ti.com SLVS087M – DECEMBER 1994 – REVISED MARCH 2012 ELECTRICAL CHARACTERISTICS over recommended operating conditions (1) (unless otherwise noted) PARAMETER VDD = 2 V IOH = –20 µA VOH VDD = 2.7 V High-level output voltage VDD = 4.5 V IOH = –2 µA VDD = 4.5 V VDD = 2 V IOL = –20 µA VOL VDD = 2.7 V Low-level output voltage VDD = 4.
PAGE 8
TLC7701, TLC7725, TLC7703 TLC7733, TLC7705 SLVS087M – DECEMBER 1994 – REVISED MARCH 2012 www.ti.
PAGE 9
TLC7701, TLC7725, TLC7703 TLC7733, TLC7705 www.ti.
PAGE 10
TLC7701, TLC7725, TLC7703 TLC7733, TLC7705 SLVS087M – DECEMBER 1994 – REVISED MARCH 2012 www.ti.com PARAMETER MEASUREMENT INFORMATION Figure 1. RESET and RESET Output Configurations Figure 2.
PAGE 11
TLC7701, TLC7725, TLC7703 TLC7733, TLC7705 www.ti.com SLVS087M – DECEMBER 1994 – REVISED MARCH 2012 TYPICAL CHARACTERISTICS NORMALIZED INPUT THRESHOLD VOLTAGE vs TEMPERATURE SUPPLY CURRENT vs SUPPLY VOLTAGE Figure 3. Figure 4. HIGH-LEVEL OUTPUT VOLTAGE vs HIGH-LEVEL OUTPUT CURRENT LOW-LEVEL OUTPUT VOLTAGE vs LOW-LEVEL OUTPUT CURRENT Figure 5. Figure 6.
PAGE 12
TLC7701, TLC7725, TLC7703 TLC7733, TLC7705 SLVS087M – DECEMBER 1994 – REVISED MARCH 2012 www.ti.com TYPICAL CHARACTERISTICS (continued) 12 INPUT CURRENT vs INPUT VOLTAGE AT SENSE MINIMUM PULSE DURATION AT SENSE vs SENSE THRESHOLD OVERDRIVE Figure 7. Figure 8.
PAGE 13
TLC7701, TLC7725, TLC7703 TLC7733, TLC7705 www.ti.com SLVS087M – DECEMBER 1994 – REVISED MARCH 2012 APPLICATION INFORMATION Figure 9. Reset Controller in a Microcomputer System Figure 10.
PAGE 14
TLC7701, TLC7725, TLC7703 TLC7733, TLC7705 SLVS087M – DECEMBER 1994 – REVISED MARCH 2012 www.ti.com Changes from Revision L (February 2003) to Revision M • 14 Page Updated the DRB package Pin Out dimensions and Ordering Information. ........................................................................
PAGE 15
PACKAGE OPTION ADDENDUM www.ti.
PAGE 16
PACKAGE OPTION ADDENDUM www.ti.
PAGE 17
PACKAGE OPTION ADDENDUM www.ti.
PAGE 18
PACKAGE OPTION ADDENDUM www.ti.
PAGE 19
PACKAGE OPTION ADDENDUM www.ti.
PAGE 20
PACKAGE OPTION ADDENDUM www.ti.
PAGE 21
PACKAGE OPTION ADDENDUM www.ti.com 10-Jun-2014 (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined.
PAGE 22
PACKAGE OPTION ADDENDUM www.ti.
PAGE 23
PACKAGE MATERIALS INFORMATION www.ti.com 3-Oct-2013 TAPE AND REEL INFORMATION *All dimensions are nominal Device TLC7701IDR Package Package Pins Type Drawing SOIC D 8 TLC7701IDRBT-NM SON DRB TLC7701IPWR TSSOP PW TLC7701QDR SOIC TLC7701QPWR TSSOP SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 8 250 180.0 12.4 3.3 3.3 1.1 8.0 12.0 Q2 8 2000 330.0 12.4 7.0 3.6 1.6 8.0 12.
PAGE 24
PACKAGE MATERIALS INFORMATION www.ti.com 3-Oct-2013 Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant TLC7733QDR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 TLC7733QDR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 TLC7733QPWR TSSOP PW 8 2000 330.0 12.4 7.0 3.6 1.6 8.0 12.
PAGE 25
PACKAGE MATERIALS INFORMATION www.ti.com 3-Oct-2013 Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) TLC7725QPWR TSSOP PW 8 2000 367.0 367.0 35.0 TLC7733IDR SOIC D 8 2500 367.0 367.0 35.0 TLC7733IDR SOIC D 8 2500 367.0 367.0 35.0 TLC7733IPWR TSSOP PW 8 2000 367.0 367.0 35.0 TLC7733QDR SOIC D 8 2500 367.0 367.0 35.0 TLC7733QDR SOIC D 8 2500 367.0 367.0 35.0 TLC7733QPWR TSSOP PW 8 2000 367.0 367.0 35.
PAGE 26
MECHANICAL DATA MCER001A – JANUARY 1995 – REVISED JANUARY 1997 JG (R-GDIP-T8) CERAMIC DUAL-IN-LINE 0.400 (10,16) 0.355 (9,00) 8 5 0.280 (7,11) 0.245 (6,22) 1 0.063 (1,60) 0.015 (0,38) 4 0.065 (1,65) 0.045 (1,14) 0.310 (7,87) 0.290 (7,37) 0.020 (0,51) MIN 0.200 (5,08) MAX Seating Plane 0.130 (3,30) MIN 0.023 (0,58) 0.015 (0,38) 0°–15° 0.100 (2,54) 0.014 (0,36) 0.008 (0,20) 4040107/C 08/96 NOTES: A. B. C. D. E. All linear dimensions are in inches (millimeters).
PAGE 27
PAGE 28
PAGE 29
PAGE 30
PAGE 31
PAGE 32
PAGE 33
PAGE 34
PAGE 35
PAGE 36
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.