Datasheet

ManualsBrandsTEXAS INSTRUMENTS ManualsLinear ICsLinear IC - Op-amp Multi-purpose SOIC 8

TLV2361, TLV2362

HIGH-PERFORMANCE LOW-VOLTAGE OPERATIONAL AMPLIFIERS



SLOS195H − FEBRUARY 1997 − REVISED JUNE 2007

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

POST OFFICE BOX 1443

• HOUSTON, TEXAS 77251−1443

D Low Supply-Voltage

Operation...V

= ±1 V Min

D Wide Bandwidth ...7 MHz Typ at

± = ±2.5 V

D High Slew Rate ...3 V/µs Typ at

± = ±2.5 V

D Wide Output Voltage Swing . . . ±2.4 V Typ

at V

± = ±2.5 V, R

= 10 kΩ

D Low Noise ...8 nV/√Hz Typ at f = 1 kHz

description/ordering information

The TLV236x devices are high-performance dual

operational amplifiers built using an original

Texas Instruments bipolar process. These

devices can be operated at a very low supply

voltage (±1 V), while maintaining a wide output swing. The TLV236x devices offer a dramatically improved

dynamic range of signal conditioning in low-voltage systems. The TLV236x devices also provide higher

performance than other general-purpose operational amplifiers by combining higher unity-gain bandwidth and

faster slew rate. With their low distortion and low-noise performance, these devices are well suited for audio

applications.

ORDERING INFORMATION

PACKAGE

†

ORDERABLE

PART NUMBER

TOP-SIDE

MARKING

‡

0°Cto70°C

SOT 23 5 (DBV)

Reel of 3000 TLV2361CDBVR

YC3

−0°C to 70°C SOT-23-5 (DBV)

Reel of 250 TLV2361CDBVT

YC3_

SOT 23 5 (DBV)

Reel of 3000 TLV2361IDBVR

YC4

SOT-23-5 (DBV)

Reel of 250 TLV2361IDBVT

YC4_

MSOP/VSSOP (DGK) Reel of 2500 TLV2362IDGKR YBS

PDIP (P) Tube of 50 TLV2362IP TLV2362IP

−40°C to 85°C

SOIC (D)

Tube of 75 TLV2362ID

2362I

40 C

85 C

SOIC (D)

Reel of 2500 TLV2362IDR

2362I

SOP (PS) Reel of 2000 TLV2362IPSR TY2362

TSSOP (PW)

Tube of 150 TLV2362IPW

TY2362

TSSOP (PW)

Reel of 2000 TLV2362IPWR

TY2362

†

Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are

available at www.ti.com/sc/package.

‡

DBV: The actual top-side marking has one additional character that designates the wafer fab/assembly site.

PRODUCTION DATA information is current as of publication date.

Products conform to specifications per the terms of Texas Instruments

standard warranty. Production processing does not necessarily include

testing of all parameters.

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of

Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

1OUT

1IN−

1IN+

CC−

CC+

2OUT

2IN−

2IN+

TLV2361 . . . DBV PACKAGE

(TOP VIEW)

TLV2362 . . . D, DGK, P, PS, OR PW PACKAGE

(TOP VIEW)

IN+

CC−

IN−

CC+

OUT

Summary of content (22 pages)

PAGE 1
TLV2361, TLV2362 HIGH-PERFORMANCE LOW-VOLTAGE OPERATIONAL AMPLIFIERS SLOS195H − FEBRUARY 1997 − REVISED JUNE 2007 D Low Supply-Voltage TLV2361 . . . DBV PACKAGE (TOP VIEW) Operation . . . VCC = ±1 V Min D Wide Bandwidth . . . 7 MHz Typ at D D D IN+ VCC− IN− VCC± = ±2.5 V High Slew Rate . . . 3 V/µs Typ at VCC± = ±2.5 V Wide Output Voltage Swing . . . ±2.4 V Typ at VCC± = ±2.5 V, RL = 10 kΩ Low Noise . . . 8 nV/√Hz Typ at f = 1 kHz 1 5 VCC+ 4 OUT 2 3 TLV2362 . . .
PAGE 2
TLV2361, TLV2362 HIGH-PERFORMANCE LOW-VOLTAGE OPERATIONAL AMPLIFIERS SLOS195H − FEBRUARY 1997 − REVISED JUNE 2007 equivalent schematic (each amplifier) VCC+ IN+ IN− OUT VCC− ACTUAL DEVICE COMPONENT COUNT COMPONENT TLV2361 TLV2362 30 46 Resistors 6 11 Diodes 1 1 Capacitors 2 4 JFET 1 1 Transistors 2 • POST OFFICE BOX 655303 DALLAS, TEXAS 75265 POST OFFICE BOX 1443 HOUSTON, TEXAS 77251−1443 •
PAGE 3
TLV2361, TLV2362 HIGH-PERFORMANCE LOW-VOLTAGE OPERATIONAL AMPLIFIERS SLOS195H − FEBRUARY 1997 − REVISED JUNE 2007 absolute maximum ratings over operating free-air temperature range (unless otherwise noted)† Supply voltage, VCC+ (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.5 V Supply voltage, VCC− (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 4
TLV2361, TLV2362 HIGH-PERFORMANCE LOW-VOLTAGE OPERATIONAL AMPLIFIERS SLOS195H − FEBRUARY 1997 − REVISED JUNE 2007 TLV2361 and TLV2362 electrical characteristics, VCC± = ±1.5 V (unless otherwise noted) PARAMETER TEST CONDITIONS MIN TA 25°C TYP 1 MAX UNIT 6 VIO Input offset voltage VO = 0 0, VIC = 0 IIO Input offset current VO = 0 0, VIC = 0 IIB Input bias current VO = 0 0, VIC = 0 VIC Common-mode Common mode input voltage |VIO| ≤ 7 5 mV 7.
PAGE 5
TLV2361, TLV2362 HIGH-PERFORMANCE LOW-VOLTAGE OPERATIONAL AMPLIFIERS SLOS195H − FEBRUARY 1997 − REVISED JUNE 2007 TLV2361 and TLV2362 electrical characteristics, VCC± = ±2.5 V (unless otherwise noted) PARAMETER TEST CONDITIONS TA MIN TYP 25°C 1 MAX UNIT 6 VIO Input offset voltage VO = 0 0, VIC = 0 IIO Input offset current VO = 0 0, VIC = 0 IIB Input bias current VO = 0 0, VIC = 0 VIC Common-mode Common mode input voltage |VIO| ≤ 7 5 mV 7.
PAGE 6
TLV2361, TLV2362 HIGH-PERFORMANCE LOW-VOLTAGE OPERATIONAL AMPLIFIERS SLOS195H − FEBRUARY 1997 − REVISED JUNE 2007 TYPICAL CHARACTERISTICS Table of Graphs GRAPH TITLE 6 FIGURE Supply current vs Free-air temperature 1 Supply current vs Supply voltage 2 Maximum positive output voltage vs Output current 3 Maximum negative output voltage vs Output current 4 Maximum peak-to-peak output voltage vs Frequency 5 Equivalent input noise voltage vs Frequency 6 Total harmonic distortion vs Frequency 7 T
PAGE 7
TLV2361, TLV2362 HIGH-PERFORMANCE LOW-VOLTAGE OPERATIONAL AMPLIFIERS SLOS195H − FEBRUARY 1997 − REVISED JUNE 2007 TYPICAL CHARACTERISTICS SUPPLY CURRENT vs FREE-AIR TEMPERATURE SUPPLY CURRENT vs SUPPLY VOLTAGE 2.5 2.5 VO = 0 No Load Per Channel I CC − Supply Current − mA I CC − Supply Current − mA 2 VCC = ±2.5 V 1.5 VCC = ±1.5 V 1 0.5 TA = 25°C TA = 0°C 2 TA = −40°C 1.5 1 0.
PAGE 8
TLV2361, TLV2362 HIGH-PERFORMANCE LOW-VOLTAGE OPERATIONAL AMPLIFIERS SLOS195H − FEBRUARY 1997 − REVISED JUNE 2007 TYPICAL CHARACTERISTICS EQUIVALENT INPUT NOISE VOLTAGE vs FREQUENCY 50 5 V n − Equivalent Input Noise Voltage − nV/ Hz VO(PP) − Maximum Peak-to-Peak Output Voltage − V MAXIMUM PEAK-TO-PEAK OUTPUT VOLTAGE vs FREQUENCY VCC± = ±2.5 V 4 3 VCC± = ±1.5 V 2 1 TA = 25°C RL = 10 kΩ 0 1k 10 k 1M 100 k VCC± = ±2.
PAGE 9
PACKAGE OPTION ADDENDUM www.ti.
PAGE 10
PACKAGE OPTION ADDENDUM www.ti.
PAGE 11
PACKAGE OPTION ADDENDUM www.ti.com 11-Apr-2013 Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.
PAGE 12
PACKAGE MATERIALS INFORMATION www.ti.com 24-Apr-2013 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) TLV2361CDBVR SOT-23 DBV 5 3000 180.0 9.2 TLV2361CDBVR SOT-23 DBV 5 3000 178.0 TLV2361CDBVT SOT-23 DBV 5 250 178.
PAGE 13
PACKAGE MATERIALS INFORMATION www.ti.com 24-Apr-2013 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) TLV2361CDBVR SOT-23 DBV 5 3000 205.0 200.0 33.0 TLV2361CDBVR SOT-23 DBV 5 3000 180.0 180.0 18.0 TLV2361CDBVT SOT-23 DBV 5 250 180.0 180.0 18.0 TLV2361CDBVT SOT-23 DBV 5 250 205.0 200.0 33.0 TLV2361IDBVR SOT-23 DBV 5 3000 180.0 180.0 18.0 TLV2361IDBVR SOT-23 DBV 5 3000 205.0 200.0 33.
PAGE 14
PAGE 15
PAGE 16
PAGE 17
PAGE 18
PAGE 19
PAGE 20
PAGE 21
PAGE 22
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.