Datasheet

ManualsBrandsTEXAS INSTRUMENTS ManualsLinear ICsLinear IC - Op-amp Multi-purpose SOT 23 5

TLV2401, TLV2402, TLV2404

FAMILY OF 880-nA/Ch RAIL-TO-RAIL INPUT/OUTPUT

OPERATIONAL AMPLIFIERS WITH REVERSE BATTERY PROTECTION

SLOS244B – FEBRUARY 2000 – REVISED NOVEMBER 2000

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

Micro-Power Operation ... < 1 µA/Channel

Input Common-Mode Range Exceeds the

Rails ... –0.1 V to V

+ 5 V

Reverse Battery Protection Up To 18 V

Rail-to-Rail Input/Output

Gain Bandwidth Product ... 5.5 kHz

Supply Voltage Range ... 2.5 V to 16 V

Specified Temperature Range

– T

= 0°C to 70°C... Commercial Grade

– T

= –40°C to 125°C... Industrial Grade

Ultrasmall Packaging

– 5-Pin SOT-23 (TLV2401)

– 8-Pin MSOP (TLV2402)

Universal OpAmp EVM (Refer to the EVM

Selection Guide SLOU060)

description

The TLV240x family of single-supply operational

amplifiers has the lowest supply current available

today at only 880 nA per channel. Reverse battery

protection guards the amplifier from an over-

current condition due to improper battery

installation. For harsh environments, the inputs

can be taken 5 V above the positive supply rail

without damage to the device.

The low supply current is coupled with extremely low input bias currents enabling them to be used with mega-Ω

resistors making them ideal for portable, long active life, applications. DC accuracy is ensured with a low typical

offset voltage as low as 390 µV, CMRR of 120 dB and minimum open loop gain of 130 V/mV at 2.7 V.

The maximum recommended supply voltage is as high as 16 V and ensured operation down to 2.5 V, with

electrical characteristics specified at 2.7 V, 5 V and 15 V. The 2.5-V operation makes it compatible with Li-Ion

battery-powered systems and many micro-power microcontrollers available today including TI’s MSP430.

All members are available in PDIP and SOIC with the singles in the small SOT-23 package, duals in the MSOP,

and quads in TSSOP.

SELECTION OF SINGLE SUPPLY OPERATIONAL AMPLIFIER PRODUCTS

†

DEVICE

(V)

(mV)

(MHz)

SLEW RATE

(V/µs)

/ch

(µA)

RAIL-TO-RAIL

TLV240x

‡

2.5–16 0.390 0.005 0.002 0.880 I/O

TLV224x 2.5–12 0.600 0.005 0.002 1 I/O

TLV2211 2.7–10 0.450 0.065 0.025 13 O

TLV245x 2.7–6 0.020 0.22 0.110 23 I/O

TLV225x 2.7–8 0.200 0.2 0.12 35 O

†

All specifications are typical values measured at 5 V.

‡

This device also offers 18-V reverse battery protection and 5-V over-the-rail operation on the inputs.

0.2

0.4

0.6

0.8

1.0

1.2

1.4

0246810121416

SUPPLY CURRENT

SUPPLY VOLTAGE

– Supply Voltage – V

I Supply Current – – A/Chµ

= 1

= V

/ 2

= 25 °C

Operational Amplifier

–

PRODUCTION DATA information is current as of publication date.

Products conform to specifications per the terms of Texas Instruments

standard warranty. Production processing does not necessarily include

testing of all parameters.

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of

Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

Summary of content (33 pages)

PAGE 1
TLV2401, TLV2402, TLV2404 FAMILY OF 880-nA/Ch RAIL-TO-RAIL INPUT/OUTPUT OPERATIONAL AMPLIFIERS WITH REVERSE BATTERY PROTECTION SLOS244B – FEBRUARY 2000 – REVISED NOVEMBER 2000 D D D D D D D Micro-Power Operation . . . < 1 µA/Channel Input Common-Mode Range Exceeds the Rails . . . –0.1 V to VCC + 5 V Reverse Battery Protection Up To 18 V Rail-to-Rail Input/Output Gain Bandwidth Product . . . 5.5 kHz Supply Voltage Range . . . 2.5 V to 16 V Specified Temperature Range – TA = 0°C to 70°C . . .
PAGE 2
TLV2401, TLV2402, TLV2404 FAMILY OF 880-nA/Ch RAIL-TO-RAIL INPUT/OUTPUT OPERATIONAL AMPLIFIERS WITH REVERSE BATTERY PROTECTION SLOS244B – FEBRUARY 2000 – REVISED NOVEMBER 2000 TLV2401 AVAILABLE OPTIONS VIOmax AT 25°C TA 0°C to 70°C - 40°C to 125°C 1500 µV PACKAGED DEVICES SOT-23† SYMBOLS (DBV) SMALL OUTLINE† (D) TLV2401CD TLV2401CDBV VAWC TLV2401ID TLV2401IDBV VAWI PLASTIC DIP (P) — TLV2401IP † This package is available taped and reeled.
PAGE 3
TLV2401, TLV2402, TLV2404 FAMILY OF 880-nA/Ch RAIL-TO-RAIL INPUT/OUTPUT OPERATIONAL AMPLIFIERS WITH REVERSE BATTERY PROTECTION SLOS244B – FEBRUARY 2000 – REVISED NOVEMBER 2000 absolute maximum ratings over operating free-air temperature range (unless otherwise noted)† Supply voltage, VCC (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 V Differential input voltage range, VID . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 4
TLV2401, TLV2402, TLV2404 FAMILY OF 880-nA/Ch RAIL-TO-RAIL INPUT/OUTPUT OPERATIONAL AMPLIFIERS WITH REVERSE BATTERY PROTECTION SLOS244B – FEBRUARY 2000 – REVISED NOVEMBER 2000 electrical characteristics at recommended operating conditions, VCC = 2.7, 5 V, and 15 V (unless otherwise noted) dc performance PARAMETER VIO Input offset voltage αVIO Offset voltage draft TEST CONDITIONS VIC = 0 to VCC, RS = 50 Ω MAX 390 1200 1500 25°C VCC = 5 V 7V VCC = 2 2.
PAGE 5
TLV2401, TLV2402, TLV2404 FAMILY OF 880-nA/Ch RAIL-TO-RAIL INPUT/OUTPUT OPERATIONAL AMPLIFIERS WITH REVERSE BATTERY PROTECTION SLOS244B – FEBRUARY 2000 – REVISED NOVEMBER 2000 electrical characteristics at recommended operating conditions, VCC = 2.7, 5 V, and 15 V (unless otherwise noted) (continued) output characteristics PARAMETER TEST CONDITIONS VCC = 2 2.7 7V VIC = VCC/2,, IOH = –2 µA VCC = 5 V VCC = 15 V VOH High level output voltage High-level VCC = 2 2.
PAGE 6
TLV2401, TLV2402, TLV2404 FAMILY OF 880-nA/Ch RAIL-TO-RAIL INPUT/OUTPUT OPERATIONAL AMPLIFIERS WITH REVERSE BATTERY PROTECTION SLOS244B – FEBRUARY 2000 – REVISED NOVEMBER 2000 electrical characteristics at recommended operating conditions, VCC = 2.7, 5 V, and 15 V (unless otherwise noted) (continued) dynamic performance PARAMETER TEST CONDITIONS UGBW Unity gain bandwidth RL = 500 kΩ, SR Slew rate at unity gain VO(pp) = 0.
PAGE 7
TLV2401, TLV2402, TLV2404 FAMILY OF 880-nA/Ch RAIL-TO-RAIL INPUT/OUTPUT OPERATIONAL AMPLIFIERS WITH REVERSE BATTERY PROTECTION SLOS244B – FEBRUARY 2000 – REVISED NOVEMBER 2000 TYPICAL CHARACTERISTICS Table of Graphs FIGURE VIO Input Offset Voltage vs Common-mode input voltage 1, 2, 3 vs Free-air temperature 4, 6, 8 vs Common-mode input voltage 5, 7, 9 vs Free-air temperature 4, 6, 8 vs Common-mode input voltage 5, 7, 9 IIB Input Bias Current IIO Input Offset Current CMRR Common-mode reject
PAGE 8
TLV2401, TLV2402, TLV2404 FAMILY OF 880-nA/Ch RAIL-TO-RAIL INPUT/OUTPUT OPERATIONAL AMPLIFIERS WITH REVERSE BATTERY PROTECTION SLOS244B – FEBRUARY 2000 – REVISED NOVEMBER 2000 TYPICAL CHARACTERISTICS INPUT OFFSET VOLTAGE vs COMMON-MODE INPUT VOLTAGE INPUT OFFSET VOLTAGE vs COMMON-MODE INPUT VOLTAGE 800 600 400 200 0 0 –100 –200 –300 VCC = 5 V TA = 25 °C –400 –0.2 –0.1 0.4 1.0 1.6 2.2 2.8 3.4 4.0 4.6 5.2 –200 –0.20 –0.1 0.20 0.60 1.00 1.40 1.80 2.20 2.60 2.
PAGE 9
TLV2401, TLV2402, TLV2404 FAMILY OF 880-nA/Ch RAIL-TO-RAIL INPUT/OUTPUT OPERATIONAL AMPLIFIERS WITH REVERSE BATTERY PROTECTION SLOS244B – FEBRUARY 2000 – REVISED NOVEMBER 2000 TYPICAL CHARACTERISTICS HIGH-LEVEL OUTPUT VOLTAGE vs HIGH-LEVEL OUTPUT CURRENT 1.50 100 RF=100 kΩ RI=1 kΩ 80 60 40 20 VCC = 2.7 V 2.4 TA = –40°C 2.1 TA = –0°C TA = 25 °C TA = 70 °C TA = 125 °C 1.8 1.5 1.
PAGE 10
TLV2401, TLV2402, TLV2404 FAMILY OF 880-nA/Ch RAIL-TO-RAIL INPUT/OUTPUT OPERATIONAL AMPLIFIERS WITH REVERSE BATTERY PROTECTION SLOS244B – FEBRUARY 2000 – REVISED NOVEMBER 2000 TYPICAL CHARACTERISTICS SUPPLY CURRENT vs SUPPLY VOLTAGE POWER SUPPLY REJECTION RATIO vs FREQUENCY PSRR – Power Supply Rejection Ratio – dB I CC – Supply Current – µ A/Ch 1.4 1.2 1.0 0.8 0.6 TA = 125°C TA = 70 °C TA = 25 °C TA = 0 °C TA = –40°C 0.4 0.2 AV = 1 VIN = VCC / 2 0 0 2 4 6 8 10 12 14 16 VCC = 2.
PAGE 11
TLV2401, TLV2402, TLV2404 FAMILY OF 880-nA/Ch RAIL-TO-RAIL INPUT/OUTPUT OPERATIONAL AMPLIFIERS WITH REVERSE BATTERY PROTECTION SLOS244B – FEBRUARY 2000 – REVISED NOVEMBER 2000 TYPICAL CHARACTERISTICS GAIN MARGIN vs CAPACITIVE LOAD SUPPLY CURRENT vs REVERSE VOLTAGE 25 60 RL= 500 kΩ TA = 25°C 55 I CC – Supply Current – nA Gain Margin – dB TA = 25°C 50 20 VCC = 15 V 15 10 VCC = 2.
PAGE 12
TLV2401, TLV2402, TLV2404 FAMILY OF 880-nA/Ch RAIL-TO-RAIL INPUT/OUTPUT OPERATIONAL AMPLIFIERS WITH REVERSE BATTERY PROTECTION SLOS244B – FEBRUARY 2000 – REVISED NOVEMBER 2000 TYPICAL CHARACTERISTICS SMALL SIGNAL FOLLOWER PULSE RESPONSE LARGE SIGNAL INVERTING PULSE RESPONSE 2.0 150 1.5 100 80 60 VO –150 40 20 1 VCC = 2.7 V AV = –1 RL = 100 kΩ CL = 100 pF TA = 25°C 0.5 0.0 –0.5 –1.0 VO –1.
PAGE 13
TLV2401, TLV2402, TLV2404 FAMILY OF 880-nA/Ch RAIL-TO-RAIL INPUT/OUTPUT OPERATIONAL AMPLIFIERS WITH REVERSE BATTERY PROTECTION SLOS244B – FEBRUARY 2000 – REVISED NOVEMBER 2000 APPLICATION INFORMATION reverse battery protection The TLV2401/2/4 are protected against reverse battery voltage up to 18 V. When subjected to reverse battery condition the supply current is typically less than 100 nA at 25°C (inputs grounded and outputs open).
PAGE 14
TLV2401, TLV2402, TLV2404 FAMILY OF 880-nA/Ch RAIL-TO-RAIL INPUT/OUTPUT OPERATIONAL AMPLIFIERS WITH REVERSE BATTERY PROTECTION SLOS244B – FEBRUARY 2000 – REVISED NOVEMBER 2000 APPLICATION INFORMATION general configurations When receiving low-level signals, limiting the bandwidth of the incoming signals into the system is often required. The simplest way to accomplish this is to place an RC filter at the noninverting terminal of the amplifier (see Figure 38).
PAGE 15
TLV2401, TLV2402, TLV2404 FAMILY OF 880-nA/Ch RAIL-TO-RAIL INPUT/OUTPUT OPERATIONAL AMPLIFIERS WITH REVERSE BATTERY PROTECTION SLOS244B – FEBRUARY 2000 – REVISED NOVEMBER 2000 APPLICATION INFORMATION circuit layout considerations To achieve the levels of high performance of the TLV240x, follow proper printed-circuit board design techniques. A general set of guidelines is given in the following.
PAGE 16
TLV2401, TLV2402, TLV2404 FAMILY OF 880-nA/Ch RAIL-TO-RAIL INPUT/OUTPUT OPERATIONAL AMPLIFIERS WITH REVERSE BATTERY PROTECTION SLOS244B – FEBRUARY 2000 – REVISED NOVEMBER 2000 APPLICATION INFORMATION general power dissipation considerations ǒ Ǔ For a given θJA, the maximum power dissipation is shown in Figure 40 and is calculated by the following formula: P Where: + D T –T MAX A q JA PD = Maximum power dissipation of THS240x IC (watts) TMAX = Absolute maximum junction temperature (150°C) TA = Free-a
PAGE 17
TLV2401, TLV2402, TLV2404 FAMILY OF 880-nA/Ch RAIL-TO-RAIL INPUT/OUTPUT OPERATIONAL AMPLIFIERS WITH REVERSE BATTERY PROTECTION SLOS244B – FEBRUARY 2000 – REVISED NOVEMBER 2000 APPLICATION INFORMATION macromodel information Macromodel information provided was derived using Microsim Parts  Release 8, the model generation software used with Microsim PSpice .
PAGE 18
PACKAGE OPTION ADDENDUM www.ti.
PAGE 19
PACKAGE OPTION ADDENDUM www.ti.
PAGE 20
PACKAGE OPTION ADDENDUM www.ti.
PAGE 21
PACKAGE OPTION ADDENDUM www.ti.com 11-Apr-2013 (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production.
PAGE 22
PACKAGE MATERIALS INFORMATION www.ti.com 21-Sep-2012 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) TLV2401CDBVR SOT-23 DBV 5 3000 180.0 TLV2401CDBVT SOT-23 DBV 5 250 TLV2401CDR SOIC D 8 2500 TLV2401IDBVR SOT-23 DBV 5 TLV2401IDBVT SOT-23 DBV TLV2401IDR SOIC TLV2401IDR SOIC TLV2402CDGKR VSSOP B0 (mm) K0 (mm) P1 (mm) 9.0 3.15 3.2 1.4 4.0 180.0 9.0 3.15 3.2 1.
PAGE 23
PACKAGE MATERIALS INFORMATION www.ti.com 21-Sep-2012 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) TLV2401CDBVR SOT-23 DBV 5 3000 182.0 182.0 20.0 TLV2401CDBVT SOT-23 DBV 5 250 182.0 182.0 20.0 TLV2401CDR SOIC D 8 2500 340.5 338.1 20.6 TLV2401IDBVR SOT-23 DBV 5 3000 182.0 182.0 20.0 TLV2401IDBVT SOT-23 DBV 5 250 182.0 182.0 20.0 TLV2401IDR SOIC D 8 2500 340.5 338.1 20.
PAGE 24
PAGE 25
PAGE 26
PAGE 27
PAGE 28
PAGE 29
PAGE 30
PAGE 31
PAGE 32
PAGE 33
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.