Datasheet

www.ti.com Test Results
4.1 Turnon Sequence
Figure 1 shows the turnon characteristic where VIN is switched on to 5 V and the output drives a 100-mA
load. The output (C1, red) shows a fairly monotonic rise time of approximately 120 ms.
Figure 1. Start-Up Sequence
4.2 Output Load Transient
Figure 2 shows the load transient response (OUT - C1, yellow) for a full-load step transient from 0 mA to
150 mA (C4, green). VIN is set at 5 V.
3
SLVU554– October 2011 TLV70130EVM-077
Submit Documentation Feedback
Copyright © 2011, Texas Instruments Incorporated