Datasheet

Schematic and Bill of Materials

www.ti.com

7.2 Bill of Materials

Table 2. TLV70130EVM-077 Bill of Materials

Count RefDes Value Description Size Part Number MFR

1 C1 1.0uF Capacitor, Ceramic, 35V, X7R, 10% 0805 STD STD

1 C2 1.0uF Capacitor, Ceramic, 10V, X7R, 10% 0805 STD STD

4 J1-4 PEC02SAAN Header, 2-pin, 100mil spacing 0.100 in x 2 PEC02SAAN Sullins

1 U1 TLV71730DBV IC, 24-V Input Voltage, 150-mA, Ultralow IQ Low-Dropout SOT-23 TLV71730DBV TI

Regulators

1 — PCB, 1.660 In x 1.070 In x 0.062 In PWR077 Any

Notes: 1. These assemblies are ESD sensitive, ESD precautions shall be observed.

2. These assemblies must be clean and free from flux and all contaminants. Use of no clean flux is not acceptable.

3. These assemblies must comply with workmanship standards IPC-A-610 Class 2.

4. Ref designators marked with an asterisk ('**') cannot be substituted. All other components can be substituted with equivalent MFG's components.

TLV70130EVM-077 SLVU554–October 2011

Submit Documentation Feedback