Datasheet

TMP512

TMP513

SBOS491A –JUNE 2010– REVISED MAY 2011

www.ti.com

When all of the following conditions are met, the temperature sensor core triggers a single conversion of the

voltage measurement core at the same rate as the conversion rate shown by bits R2 to R0.

• The conversion rate is different than '111';

• There is at least one enabled temperature channel; and

• The voltage measurement core is in triggered mode of operation.

The temperature sensor core triggers a single conversion of the ADC core at the same rate as the conversion

rate shown by R2 to R0.

GP: GPIO Read-Back

Bit 2 Shows the state of the GPIO pin.

GPM: GPIO Mode

Bits 1-0 The GPIO mode settings are shown in Table 8. GPIO should not be left floating at start-up.

Table 8. GPIO Mode Settings

(1)

GPM[1] GPM[0] GPIO PIN DESCRIPTION

0 0 Hi-Z

Use as an input for either of these

modes.

0 1 Hi-Z

1 0 0 Use to output 0 to GPIO pin

1 1 1 Use to output 1 to GPIO pin

(1) Shaded values are default.