Digital Signal Processor Product Preview

www.ti.com

PRODUCT PREVIEW

7.11 I2C Peripheral

7.11.1 I2C Device-Specific Information

TMS320C6454

Fixed-Point Digital Signal Processor

SPRS311A – APRIL 2006 – REVISED DECEMBER 2006

The inter-integrated circuit (I2C) module provides an interface between a C64x+ DSP and other devices

compliant with Philips Semiconductors Inter-IC bus (I

C bus) specification version 2.1 and connected by

way of an I

C-bus. External components attached to this 2-wire serial bus can transmit/receive up to 8-bit

data to/from the DSP through the I2C module.

The C6454 device includes an I2C peripheral module (I2C). NOTE: when using the I2C module, ensure

there are external pullup resistors on the SDA and SCL pins.

The I2C modules on the C6454 may be used by the DSP to control local peripherals ICs (DACs, ADCs,

etc.) or may be used to communicate with other controllers in a system or to implement a user interface.

The I2C port supports:

• Compatible with Philips I2C Specification Revision 2.1 (January 2000)

• Fast Mode up to 400 Kbps (no fail-safe I/O buffers)

• Noise Filter to remove noise 50 ns or less

• 7- and 10-Bit Device Addressing Modes

• Multi-Master (Transmit/Receive) and Slave (Transmit/Receive) Functionality

• Events: DMA, Interrupt, or Polling

• Slew-Rate Limited Open-Drain Output Buffers

Figure 7-41 is a block diagram of the I2C module.

C64x+ Peripheral Information and Electrical Specifications160 Submit Documentation Feedback