Digital Signal Processor Product Preview

www.ti.com
PRODUCT PREVIEW
TMS320C6454
Fixed-Point Digital Signal Processor
SPRS311A – APRIL 2006 – REVISED DECEMBER 2006
Table 2-3. Terminal Functions (continued)
SIGNAL
TYPE
(1)
IPD/IPU
(2)
DESCRIPTION
NAME NO.
(DV
DD15
/2)-V reference for HSTL buffer (EMAC RGMII). V
REFHSTL
can be
generated directly from DV
DD15
using two 1-k Ω resistors to form a resistor
divider circuit.
NOTE: If the RGMII mode of the EMAC is not used, the DV
DD15
, V
REFHSTL
,
V
REFHSTL
B2 A
RSV13, and RSV14 pins can be connected to directly ground (V
SS
) to save
power. However, connecting these pins directly to ground will prevent
boundary-scan from functioning on the RGMII pins of the EMAC. To preserve
boundary-scan functionality on the RGMII pins, see Section 7.3.4 .
AV
DLL1
A13
A 1.8-V I/O supply voltage.
AV
DLL2
E18
A1
B5
1.8-V or 1.5-V I/O supply voltage for the RGMII function of the EMAC.
NOTE: If the RGMII mode of the EMAC is not used, the DV
DD15
, V
REFHSTL
,
D2
RSV13, and RSV14 pins can be connected to directly ground (V
SS
) to save
DV
DD15
D5 S
power. However, connecting these pins directly to ground will prevent
F5
boundary-scan from functioning on the RGMII pins of the EMAC. To preserve
boundary-scan functionality on the RGMII pins, see Section 7.3.4 .
G6
H7
B8
B11
B20
B23
E10
E12
E22
E24
F7
F11
F13
F15
DV
DD18
S 1.8-V I/O supply voltage (DDR2 Memory Controller)
F17
F19
F23
G8
G10
G12
G14
G16
G18
G20
G22
G24
Submit Documentation Feedback Device Overview 39