Switch User Manual

EMAC Module Registers www.ti.com
5.1 Transmit Revision ID Register (TXREVID)
The transmit revision ID register (TXREVID) is shown in Figure 39 and described in Table 38.
Figure 39. Transmit Revision ID Register (TXREVID)
31 0
TXREV
R-4EC0 020Dh
LEGEND: R = Read only; -n = value after reset
Table 38. Transmit Revision ID Register (TXREVID) Field Descriptions
Bit Field Value Description
31-0 TXREV Transmit module revision
4EC0 020Dh Current transmit revision value
5.2 Transmit Control Register (TXCONTROL)
The transmit control register (TXCONTROL) is shown in Figure 40 and described in Table 39.
Figure 40. Transmit Control Register (TXCONTROL)
31 16
Reserved
R-0
15 1 0
Reserved TXEN
R-0 R/W-0
LEGEND: R/W = Read/Write; R = Read only; -n = value after reset
Table 39. Transmit Control Register (TXCONTROL) Field Descriptions
Bit Field Value Description
31-1 Reserved 0 Reserved
0 TXEN Transmit enable
0 Transmit is disabled.
1 Transmit is enabled.
86
EMAC/MDIO Module SPRUFL5B–April 2011
Submit Documentation Feedback
© 2011, Texas Instruments Incorporated