Network Card User Manual

External Devices
2-31 ThunderLAN Registers
Table 2–1. ThunderLAN EEPROM Map (Continued)
Address DescriptionBinary BitsDefault
0x79 0x04 WxSHRAFI PHY and test control modes
W–PHY wrap request
S–Skip training request
H–HiPriority transmit frames request
R–Don’t copy short frame request
A–Don’t copy all frames request
F–Full duplex request
I–Internal ThunderLAN wrap request
0x7a 0x02 LFxTxADP Check modes and frame type
L–Ignore last byte plus one DMA no write test
F–Zero (ignore) bits 12 and 13 of Rx length request
T–Token ring format request
A–AT&T2X01 fix enable (receive logic state machine tweak)
D–Stop on first error
P–PMI wrap length check disable request
0x7b 0x05 Test to execute
1–Multicast test
2–Pipe test
3–Mix pipe test
4–PMI/TI-PHY interrupt test
5–Frame read/write test
6–Adapter check test
0x7c 0x14 Pipe depth value
0x7d 0x0a Reserved
0x7e 0x00 LSB of NetConfig register value
0x7f 0x06 MSB of NetConfig register value
Note: Multichannel mode must be selected for high priority frames to be
sent
0x80 0x82
0x81
0x08