TPA6102A2 Audio Power Amplifier Evaluation Module User’s Guide 2001 Mixed-Signal Products SLOU105A
IMPORTANT NOTICE Texas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue any product or service without notice, and advise customers to obtain the latest version of relevant information to verify, before placing orders, that information being relied on is current and complete.
Information About Cautions and Warnings Preface Read This First How to Use This Manual This document contains the following chapters: - Chapter 1—Introduction Chapter 2—Quick Start Information About Cautions and Warnings This book may contain cautions and warnings. This is an example of a caution statement. A caution statement describes a situation that could potentially damage your software or equipment. This is an example of a warning statement.
Running Title—Attribute Reference Related Documentation From Texas Instruments J J TI Plug-N-Play Audio Amplifier Evaluation Platform (literature number SLOU011) provides detailed information on the evaluation platform and its use with TI audio evaluation modules. TPA6102A2 50-mW Stereo Audio Power Amplifier (literature number SLOS324) This is the data sheet for the TPA6102A2 audio amplifier integrated circuit. FCC Warning This equipment is intended for use in a laboratory test environment only.
Running Title—Attribute Reference Contents 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.2 Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.
Running Title—Attribute Reference Figures 1–1 2–1 2–2 2–3 2–4 2–5 The TI TPA6102A2 Audio Amplifier Evaluation Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Quick Start Platform Map . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Quick Start Module Map . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TPA6102A2 Class-D EVM Schematic Diagram . . . . . . . . . . . . . . .
Chapter 1 Introduction This chapter provides an overview of the Texas Instruments (TI) TPA6102A2 audio amplifier evaluation module (SLOP337). It includes a list of EVM features, a brief illustrated description of the module, and a list of EVM specifications. Topic Page 1.1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–2 1.2 Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Features 1.1 Features The TI TPA6102A2 audio amplifier evaluation module and the TI plug-n-play audio amplifier evaluation platform include the following features: - - TPA6102A2 Stereo Audio Power Amplifier Evaluation Module J J J J J J J J - 1-2 Fixed-gain of 2 dB (inverting) Dual channel, single-ended operation 50-mW output power into 16 Ω at 3.3 V Very low distortion — THD+N is less than 0.08% at 1 kHz and less than 0.2% from 20 Hz to 20 kHz into 16-Ω loads, and less than 0.
Description 1.2 Description The TPA6102A2 audio power amplifier evaluation module is a complete, low-power stereo audio power amplifier for high-fidelity line-level output, headphone, and small speaker applications. It consists of the TI TPA6102A2 50-mW stereo audio power amplifier IC in a very small MSOP package, along with a small number of other parts mounted on a circuit board that is approximately one and a quarter inches square (see Figure 1–1). Figure 1–1.
1-4 Introduction
Chapter 2 Quick Start The steps in this chapter can be followed to prepare the TPA6102A2 audio amplifier EVM for use. Using the TPA6102A2 EVM with the TI plug-n-play audio amplifier evaluation platform is a quick and easy way to connect power, signal and control inputs, and signal outputs to the EVM using standard connectors.
Precautions 2.1 Precautions Power Supply Input Polarity and Maximum Voltage Always ensure that the polarity and voltage of the external power connected to VCC power input connector J1, J2, and/or VDD power input connector J6 are correct. Overvoltage or reverse-polarity power applied to these terminals can open onboard soldered-in fuses and cause other damage to the platform, installed evaluation modules, and/or the power source.
Quick Start List for Platform 2.2 Quick Start List for Platform Follow these steps when using the TPA6102A2 EVM with the TI plug-n-play audio amplifier evaluation platform (see the platform user’s guide, literature number SLOU011, for additional details). Numbered callouts for selected steps are shown in Figure 2–1. - Platform preparations 1) Ensure that all external power sources are set to OFF and that the platform power switch S1 is set to OFF.
Quick Start List for Stand-Alone 2.3 Quick Start List for Stand-Alone Follow these steps to use the TPA6102A2 EVM stand-alone or when connecting it into existing circuits or equipment. Connections to the TPA6102A2 module header pins can be made via individual sockets, wire-wrapping, or soldering to the pins, either on the top or the bottom of the module circuit board. Numbered callouts for selected steps are shown in Figure 2–2. Figure 2–2.
TPA6102A2 EVM Schematic 2.4 Reference 2.4.1 TPA6102A2 EVM Schematic The TPA6102A2 EVM schematic is shown in Figure 2–3. Figure 2–3. TPA6102A2 EVM Schematic Diagram C1 0.1 µF RIN 1 8 BYPASS C3 1 µF 2 IN1– VO1 7 ROUT GND TPA6102A2 3 SHUTDOWN VDD 6 + C4 0.1 µF C2 0.
TPA6102A2 Audio Power Amplifier Evaluation Module Parts List 2.4.2 TPA6102A2 Audio Power Amplifier Evaluation Module Parts List Table 2–2. TPA6102A2 EVM Parts List Ref. Description Size Qty. Manufacturer/ Part Number Vendor/Number C1, C2, C4 Capacitor, 0.1 µF, ±10%, Nonpolarized, SMD 0603 1 Murata GRM39X7R104K16 Arrow GRM39X7R104K16 C3 Capacitor, 1 µF, ±10%, Nonpolarized, SMD 0603 1 Murata GRM39Y5V105Z010 Arrow GRM39Y5V105Z010 C5 Capacitor, 10 µF, 6.
