Datasheet

1-1
Chapter 1
Introduction
The Texas Instruments TPS62020 evaluation module (EVM) for low-power,
high-efficiency, step-down converters helps designers evaluate this device.
The EVM enables evaluation of different device modes and device
performance.
The TPS62020EVM is set to 1.5 V. The TPS62020EVM can be easily set
up to provide any output voltage between 0.7 V and 6 V (or Vin) by
adjusting the external resistor divider. See the TPS62020 data sheet
(SLVS076) for the output voltage calculation. The TPS62020 has an input
voltage range between 2.5 V and 6 V with an output current up to 0.6 A.
Topic Page
1.1 EVM Ordering Information 1-2