Datasheet

ManualsBrandsTEXAS INSTRUMENTS ManualsPMICsPMIC - LDO voltage regulator Positive, fixed SOT 23 5

    

    

    

SLVS181H − DECEMBER 1998 − REVISED JANUARY 2004

www.ti.com

D 150-mA Low-Dropout Regulator

D Output Voltage: 5 V, 3.8 V, 3.3 V, 3.0 V, 2.8 V,

2.7 V, 2.5 V, 1.8 V, 1.6 V and Variable

D Dropout Voltage, Typically 300 mV

at 150 mA

D Thermal Protection

D Over Current Limitation

D Less Than 2-µA Quiescent Current in

Shutdown Mode

D −40°C to 125°C Operating Junction

Temperature Range

D 5-Pin SOT-23 (DBV) Package

description

The TPS763xx family of low-dropout (LDO) voltage regulators offers the benefits of low-dropout voltage, low-power

operation, and miniaturized packaging. These regulators feature low dropout voltages and quiescent currents compared

to conventional LDO regulators. Offered in a 5-terminal, small outline integrated-circuit SOT-23 package, the TPS763xx

series devices are ideal for cost-sensitive designs and for applications where board space is at a premium.

A combination of new circuit design and process innovation has enabled the usual pnp pass transistor to be replaced by

a PMOS pass element. Because the PMOS pass element behaves as a low-value resistor, the dropout voltage is very

low—typically 300 mV at 150 mA of load current (TPS76333)—and is directly proportional to the load current. Since the

PMOS pass element is a voltage-driven device, the quiescent current is very low (140 µA maximum) and is stable over

the entire range of output load current (0 mA to 150 mA). Intended for use in portable systems such as laptops and cellular

phones, the low-dropout voltage feature and low-power operation result in a significant increase in system battery operating

life.

The TPS763xx also features a logic-enabled sleep mode to shut down the regulator, reducing quiescent current to 1 µA

maximum at T

= 25°C.The TPS763xx is offered in 1.6-V,1.8-V, 2.5-V, 2.7-V, 2.8-V, 3.0-V, 3.3-V, 3.8-V, and 5-V fixed-voltage

versions and in a variable version (programmable over the range of 1.5 V to 6.5 V.

AVAILABLE OPTIONS

VOLTAGE PACKAGE PART NUMBER SYMBOL

Variable TPS76301DBVT

(1)

TPS76301DBVR

(2)

PAZI

1.6 V TPS76316DBVT TPS76316DBVR PBHI

1.8 V TPS76318DBVT TPS76318DBVR PBAI

2.5 V TPS76325DBVT TPS76325DBVR PBBI

−40°C to 125°C

2.7 V

SOT-23

TPS76327DBVT TPS76327DBVR PBCI

−40°C to 125°C

2.8 V

SOT-23

(DBV)

TPS76328DBVT TPS76328DBVR PBDI

3.0 V

(DBV)

TPS76330DBVT TPS76330DBVR PBII

3.3 V TPS76333DBVT TPS76333DBVR PBEI

3.8 V TPS76338DBVT TPS76338DBVR PBFI

5.0 V TPS76350DBVT TPS76350DBVR PBGI

(1)

The DBVT passive indicates tape and reel of 250 parts.

(2)

The DBVR passive indicates tape and reel of 3000 parts.

  !" # $%&" !#  '%()$!" *!"&+ *%$"#

$ " #'&$$!"# '& ",& "&#  &-!# #"%&"# #"!*!* .!!"/+

*%$" '$&##0 *&# " &$&##!)/ $)%*& "&#"0  !)) '!!&"&#+

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of

Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

All trademarks are the property of their respective owners.

DBV PACKAGE

(TOP VIEW)

GND

OUT

NC/FB

Summary of content (25 pages)

PAGE 1
www.ti.com SLVS181H − DECEMBER 1998 − REVISED JANUARY 2004 D 150-mA Low-Dropout Regulator D Output Voltage: 5 V, 3.8 V, 3.3 V, 3.0 V, 2.8 V, DBV PACKAGE (TOP VIEW) 2.7 V, 2.5 V, 1.8 V, 1.
PAGE 2
www.ti.
PAGE 3
www.ti.com SLVS181H − DECEMBER 1998 − REVISED JANUARY 2004 absolute maximum ratings over operating free-air temperature range (unless otherwise noted)1 Input voltage range(2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.3 V to 10 V Voltage range at EN . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 4
www.ti.com SLVS181H − DECEMBER 1998 − REVISED JANUARY 2004 electrical characteristics over recommended operating free-air temperature range, VI = VO(typ) + 1 V, IO = 1 mA, EN = IN, Co = 4.7 µF (unless otherwise noted) PARAMETER TEST CONDITIONS 3.25 V > VI ≥ 2.7 V, 2.5 V ≥ VO ≥ 1.5 V, 3.25 V > VI ≥ 2.7 V, 2.5 V ≥ VO ≥ 1.5 V TPS76301 VI ≥ 3.25 V, 5 V ≥ VO ≥ 1.5 V VI ≥ 3.
PAGE 5
www.ti.com SLVS181H − DECEMBER 1998 − REVISED JANUARY 2004 electrical characteristics over recommended operating free-air temperature range, VI = VO(typ) + 1 V, IO = 1 mA, EN = IN, Co = 4.7 µF (unless otherwise noted) (continued) PARAMETER TEST CONDITIONS TPS76333 VO Output voltage TPS76338 TPS76350 I(Q) Quiescent current (GND terminal current) Standby current 3.3 3.
PAGE 6
www.ti.com SLVS181H − DECEMBER 1998 − REVISED JANUARY 2004 electrical characteristics over recommended operating free-air temperature range, VI = VO(typ) + 1 V, IO = 1 mA, EN = IN, Co = 4.7 µF (unless otherwise noted) (continued) PARAMETER TEST CONDITIONS TPS76325 VDO Dropout voltage TPS76333 TPS76350 6 MIN TYP IO = 0 mA, IO = 1 mA, TJ = 25°C TJ = 25°C 0.
PAGE 7
www.ti.com SLVS181H − DECEMBER 1998 − REVISED JANUARY 2004 TYPICAL CHARACTERISTICS TPS76325 TPS76318 OUTPUT VOLTAGE vs OUTPUT CURRENT OUTPUT VOLTAGE vs OUTPUT CURRENT 2.505 VI = 3.5 V CI = CO = 4.7 µF TJ = 25°C 1.800 VO − Output Voltage − V 2.5 VO − Output Voltage − V 1.805 VI = 3.5 V CI = CO = 4.7 µF TJ = 25°C 2.495 2.49 2.485 1.795 1.790 1.785 1.780 2.48 1.
PAGE 8
www.ti.com SLVS181H − DECEMBER 1998 − REVISED JANUARY 2004 TYPICAL CHARACTERISTICS TPS76318 TPS76350 OUTPUT VOLTAGE vs FREE-AIR TEMPERATURE OUTPUT VOLTAGE vs FREE-AIR TEMPERATURE 5.1 1.82 VI = 6 V CI = CO = 4.7 µF 5.08 1.81 IO = 1 mA 5.06 VO − Output Voltage − V VO − Output Voltage − V 1.8 1.79 IO = 150 mA 1.78 1.77 1.76 5.04 5.02 IO = 1 mA 5 4.98 4.
PAGE 9
www.ti.com SLVS181H − DECEMBER 1998 − REVISED JANUARY 2004 TYPICAL CHARACTERISTICS TPS76325 DROPOUT VOLTAGE vs FREE-AIR TEMPERATURE OUTPUT IMPEDANCE vs FREQUENCY 600 10 VI = EN = 2.7 V CI = CO = 4.7 µF VDO − Dropout Voltage − mV IO = 1 mA 1 IO = 150 mA 0.1 0.01 0.1 150 mA 400 300 200 1 mA 0 mA 100 CI = CO = 4.
PAGE 10
www.ti.com SLVS181H − DECEMBER 1998 − REVISED JANUARY 2004 TYPICAL CHARACTERISTICS 4 3 2 ∆ VO − Change in Output Voltage − mV 200 100 0 CO = 4.7 µF ESR = 0.25 Ω TJ = 25°C 50 CO = 4.7 µF ESR = 0.
PAGE 11
www.ti.
PAGE 12
www.ti.
PAGE 13
www.ti.com SLVS181H − DECEMBER 1998 − REVISED JANUARY 2004 APPLICATION INFORMATION external capacitor requirements Although not required, a 0.047 µF or larger ceramic bypass input capacitor, connected between IN and GND and located close to the TPS763xx, is recommended to improve transient response and noise rejection.
PAGE 14
www.ti.com SLVS181H − DECEMBER 1998 − REVISED JANUARY 2004 APPLICATION INFORMATION TPS76301 OUTPUT VOLTAGE PROGRAMMING GUIDE DIVIDER RESISTANCE (kΩ)(1) OUTPUT VOLTAGE (V) R1 R2 2.5 187 169 3.3 301 169 3.6 348 169 4 402 169 549 169 750 6.45 (1) 1% values shown. 169 5 VI 1 µF ≥2 V 1 IN OUT 3 ≤ 0.5 V 5 VO R1 EN FB GND 2 4 + R2 4.
PAGE 15
www.ti.com SLVS181H − DECEMBER 1998 − REVISED JANUARY 2004 APPLICATION INFORMATION regulator protection The TPS763xx pass element has a built-in back diode that safely conducts reverse currents when the input voltage drops below the output voltage (e.g., during power down). Current is conducted from the output to the input and is not internally limited.
PAGE 16
PACKAGE OPTION ADDENDUM www.ti.
PAGE 17
PACKAGE OPTION ADDENDUM www.ti.
PAGE 18
PACKAGE OPTION ADDENDUM www.ti.
PAGE 19
PACKAGE OPTION ADDENDUM www.ti.com 11-Apr-2013 Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties.
PAGE 20
PACKAGE MATERIALS INFORMATION www.ti.com 23-Dec-2011 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) TPS76301DBVR SOT-23 DBV 5 3000 179.0 8.4 TPS76301DBVR SOT-23 DBV 5 3000 178.0 TPS76301DBVT SOT-23 DBV 5 250 179.0 TPS76301DBVT SOT-23 DBV 5 250 TPS76316DBVR SOT-23 DBV 5 W Pin1 (mm) Quadrant 3.2 3.2 1.4 4.0 8.0 Q3 9.0 3.23 3.17 1.37 4.0 8.
PAGE 21
PACKAGE MATERIALS INFORMATION www.ti.com 23-Dec-2011 Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) TPS76338DBVR SOT-23 DBV 5 3000 178.0 9.0 TPS76338DBVT SOT-23 DBV 5 250 178.0 9.0 TPS76350DBVR SOT-23 DBV 5 3000 178.0 TPS76350DBVT SOT-23 DBV 5 250 178.0 W Pin1 (mm) Quadrant 3.23 3.17 1.37 4.0 8.0 Q3 3.23 3.17 1.37 4.0 8.0 Q3 9.0 3.23 3.17 1.37 4.0 8.0 Q3 9.0 3.23 3.17 1.37 4.0 8.
PAGE 22
PACKAGE MATERIALS INFORMATION www.ti.com 23-Dec-2011 Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) TPS76328DBVT SOT-23 DBV 5 250 180.0 180.0 18.0 TPS76330DBVR SOT-23 DBV 5 3000 180.0 180.0 18.0 TPS76330DBVT SOT-23 DBV 5 250 180.0 180.0 18.0 TPS76333DBVR SOT-23 DBV 5 3000 180.0 180.0 18.0 TPS76333DBVT SOT-23 DBV 5 250 180.0 180.0 18.0 TPS76338DBVR SOT-23 DBV 5 3000 180.0 180.0 18.
PAGE 23
PAGE 24
PAGE 25
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.