Datasheet

ManualsBrandsTEXAS INSTRUMENTS ManualsPMICsPMIC - LDO voltage regulator Positive, fixed SOT 23 5

TPS77001, TPS77012, TPS77015, TPS77018, TPS77025

TPS77027, TPS77028, TPS77030, TPS77033, TPS77050

ULTRALOW-POWER 50-mA LOW-DROPOUT LINEAR REGULATORS

SLVS210D – JUNE 1999 – REVISED MAY 2001

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

50-mA Low-Dropout Regulator

Available in 1.2-V, 1.5-V, 1.8-V, 2.5-V, 2.7-V,

2.8-V, 3.0-V, 3.3-V, and 5-V Fixed-Output and

Adjustable Versions

Only 17 µA Quiescent Current at 50 mA

1 µA Quiescent Current in Standby Mode

Dropout Voltage Typically 35 mV at 50 mA

Over Current Limitation

–40°C to 125°C Operating Junction

Temperature Range

5-Pin SOT-23 (DBV) Package

description

The TPS770xx family of low-dropout (LDO)

voltage regulators offers the benefits of low

dropout voltage, ultralow-power operation, and

miniaturized packaging. These regulators feature

low dropout voltages and ultralow quiescent

current compared to conventional LDO

regulators. Offered in a 5-terminal small outline

integrated-circuit SOT-23 package, the

TPS770xx series devices are ideal for

micropower operations and where board space is

at a premium.

A combination of new circuit design and process

innovation has enabled the usual PNP pass

transistor to be replaced by a PMOS pass

element. Because the PMOS pass element

behaves as a low-value resistor, the dropout

voltage is very low — typically 35 mV at 50 mA of

load current (TPS77050) — and is directly proportional to the load current. Since the PMOS pass element is

a voltage-driven device, the quiescent current is ultralow (28 µA maximum) and is stable over the entire range

of output load current (0 mA to 50 mA). Intended for use in portable systems such as laptops and cellular phones,

the ultralow-dropout voltage feature and ultralow-power operation result in a significant increase in system

battery operating life.

The TPS770xx also features a logic-enabled sleep mode to shut down the regulator, reducing quiescent current

to 1 µA typical at T

= 25°C. The TPS770xx is offered in 1.2-V, 1.5-V, 1.8-V, 2.5-V, 2.7-V, 2.8-V, 3.0-V, 3.3-V,

and 5-V fixed-voltage versions and in a variable version (programmable over the range of 1.2 V to 5.5 V).

PRODUCTION DATA information is current as of publication date.

Products conform to specifications per the terms of Texas Instruments

standard warranty. Production processing does not necessarily include

testing of all parameters.

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of

Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

DBV PACKAGE

(TOP VIEW)

GND

OUT

NC/FB

– Free-Air Temperature – °C

TPS77033

GROUND CURRENT

FREE-AIR TEMPERATURE

Ground Current – Aµ

= 4.3 V

= 4.7 µF

–40 0–20 20 140–60 40 80 100 12060

= 0 mA

= 50 mA

Summary of content (24 pages)

PAGE 1
TPS77001, TPS77012, TPS77015, TPS77018, TPS77025 TPS77027, TPS77028, TPS77030, TPS77033, TPS77050 ULTRALOW-POWER 50-mA LOW-DROPOUT LINEAR REGULATORS SLVS210D – JUNE 1999 – REVISED MAY 2001 D D D D D D D D DBV PACKAGE (TOP VIEW) 50-mA Low-Dropout Regulator Available in 1.2-V, 1.5-V, 1.8-V, 2.5-V, 2.7-V, 2.8-V, 3.0-V, 3.
PAGE 2
TPS77001, TPS77012, TPS77015, TPS77018, TPS77025 TPS77027, TPS77028, TPS77030, TPS77033, TPS77050 ULTRALOW-POWER 50-mA LOW-DROPOUT LINEAR REGULATORS SLVS210D – JUNE 1999 – REVISED MAY 2001 AVAILABLE OPTIONS VOLTAGE TJ PACKAGE PART NUMBER SYMBOL Variable 1.2V to 5.5V TPS77001DBVT† TPS77001DBVR‡ PCPI 1.
PAGE 3
TPS77001, TPS77012, TPS77015, TPS77018, TPS77025 TPS77027, TPS77028, TPS77030, TPS77033, TPS77050 ULTRALOW-POWER 50-mA LOW-DROPOUT LINEAR REGULATORS SLVS210D – JUNE 1999 – REVISED MAY 2001 Terminal Functions TERMINAL NAME I/O NO.
PAGE 4
TPS77001, TPS77012, TPS77015, TPS77018, TPS77025 TPS77027, TPS77028, TPS77030, TPS77033, TPS77050 ULTRALOW-POWER 50-mA LOW-DROPOUT LINEAR REGULATORS SLVS210D – JUNE 1999 – REVISED MAY 2001 electrical characteristics over recommended operating free–air temperature range, VI = VO(typ) + 1 V, IO = 50 mA, EN = 0V, Co = 4.7 µF (unless otherwise noted) PARAMETER TEST CONDITIONS TPS77001 Output voltage g (10 ( µ µA to 50 mA load)) (see Note 4) 1.2 V ≤ VO ≤ 5.5 V, 1.2 V ≤ VO ≤ 5.
PAGE 5
TPS77001, TPS77012, TPS77015, TPS77018, TPS77025 TPS77027, TPS77028, TPS77030, TPS77033, TPS77050 ULTRALOW-POWER 50-mA LOW-DROPOUT LINEAR REGULATORS SLVS210D – JUNE 1999 – REVISED MAY 2001 electrical characteristics over recommended operating free–air temperature range, VI = VO(typ) + 1 V, IO = 50 mA, EN = 0V, Co = 4.7 µF (unless otherwise noted) (continued) PARAMETER TEST CONDITIONS MIN FB input current FB = 1.224 V (TPS77001) –1 High level enable input voltage 2.7 V < VI < 10 V 1.
PAGE 6
TPS77001, TPS77012, TPS77015, TPS77018, TPS77025 TPS77027, TPS77028, TPS77030, TPS77033, TPS77050 ULTRALOW-POWER 50-mA LOW-DROPOUT LINEAR REGULATORS SLVS210D – JUNE 1999 – REVISED MAY 2001 TYPICAL CHARACTERISTICS TPS77015 TPS77025 OUTPUT VOLTAGE vs OUTPUT CURRENT OUTPUT VOLTAGE vs OUTPUT CURRENT 1.498 2.498 VI = 3.5 V CO = 4.7 µF TA = 25° C 2.496 1.496 VO – Output Voltage – V 2.494 VO – Output Voltage – V VI = 2.7 V CO = 4.7 µF TA = 25° C 2.492 2.490 2.488 2.486 1.494 1.492 1.490 1.488 1.
PAGE 7
TPS77001, TPS77012, TPS77015, TPS77018, TPS77025 TPS77027, TPS77028, TPS77030, TPS77033, TPS77050 ULTRALOW-POWER 50-mA LOW-DROPOUT LINEAR REGULATORS SLVS210D – JUNE 1999 – REVISED MAY 2001 TYPICAL CHARACTERISTICS TPS77025 TPS77033 OUTPUT VOLTAGE vs FREE-AIR TEMPERATURE OUTPUT VOLTAGE vs FREE-AIR TEMPERATURE 2.496 3.285 2.494 IO = 1 mA VO – Output Voltage – V VO – Output Voltage – V 2.490 2.488 IO = 50 mA 2.484 2.482 2.480 2.478 3.275 3.270 IO = 50 mA 3.265 3.260 VI = 3.5 V CO = 4.7 µF 2.
PAGE 8
TPS77001, TPS77012, TPS77015, TPS77018, TPS77025 TPS77027, TPS77028, TPS77030, TPS77033, TPS77050 ULTRALOW-POWER 50-mA LOW-DROPOUT LINEAR REGULATORS SLVS210D – JUNE 1999 – REVISED MAY 2001 TYPICAL CHARACTERISTICS TPS77033 OUTPUT IMPEDANCE vs FREQUENCY 100 2 1.8 DROPOUT VOLTAGE vs FREE-AIR TEMPERATURE VI = 4.3 V CO = 4.7 µF VI = 3.2 V CO = 4.7 µF VDO – Dropout Voltage – mV Zo – Output Impedance – Ω 1.6 1.4 1.2 1 0.8 IO = 1 mA 0.6 0.4 10 IO = 10 mA IO = 50 mA 0.
PAGE 9
TPS77001, TPS77012, TPS77015, TPS77018, TPS77025 TPS77027, TPS77028, TPS77030, TPS77033, TPS77050 ULTRALOW-POWER 50-mA LOW-DROPOUT LINEAR REGULATORS SLVS210D – JUNE 1999 – REVISED MAY 2001 TPS77015 TPS77015 LINE TRANSIENT RESPONSE LOAD TRANSIENT RESPONSE Current Load – mA VO – Output Voltage – mV TYPICAL CHARACTERISTICS 10 0 –10 50 0 2.7 IL = 10 mA CO = 4.7 µF ESR = 0.3 Ω 0 20 40 60 80 100 120 140 160 180 200 t – Time – µs ∆ VO – Change In Output Voltage – mV VI – Input Voltage – V 3.
PAGE 10
TPS77001, TPS77012, TPS77015, TPS77018, TPS77025 TPS77027, TPS77028, TPS77030, TPS77033, TPS77050 ULTRALOW-POWER 50-mA LOW-DROPOUT LINEAR REGULATORS SLVS210D – JUNE 1999 – REVISED MAY 2001 TYPICAL CHARACTERISTICS TPS77033 TYPICAL REGIONS OF STABILITY TPS77033 TYPICAL REGIONS OF STABILITY EQUIVALENT SERIES RESISTANCE (ESR)† vs OUTPUT CURRENT EQUIVALENT SERIES RESISTANCE (ESR) vs ADDED CERAMIC CAPACITANCE 100 VIN = 4.3 V CO = 4.7 µF ESR = 0.3 Ω 3.
PAGE 11
TPS77001, TPS77012, TPS77015, TPS77018, TPS77025 TPS77027, TPS77028, TPS77030, TPS77033, TPS77050 ULTRALOW-POWER 50-mA LOW-DROPOUT LINEAR REGULATORS SLVS210D – JUNE 1999 – REVISED MAY 2001 APPLICATION INFORMATION The TPS770xx family of low-dropout (LDO) regulators have been optimized for use in battery-operated equipment. They feature extremely low dropout voltages, low quiescent current (17 µA nominally), and enable inputs to reduce supply currents to less than 1 µA when the regulators are turned off.
PAGE 12
TPS77001, TPS77012, TPS77015, TPS77018, TPS77025 TPS77027, TPS77028, TPS77030, TPS77033, TPS77050 ULTRALOW-POWER 50-mA LOW-DROPOUT LINEAR REGULATORS SLVS210D – JUNE 1999 – REVISED MAY 2001 APPLICATION INFORMATION external capacitor requirements Although not required, a 0.047-µF or larger ceramic input bypass capacitor, connected between IN and GND and located close to the TPS770xx, is recommended to improve transient response and noise rejection.
PAGE 13
TPS77001, TPS77012, TPS77015, TPS77018, TPS77025 TPS77027, TPS77028, TPS77030, TPS77033, TPS77050 ULTRALOW-POWER 50-mA LOW-DROPOUT LINEAR REGULATORS SLVS210D – JUNE 1999 – REVISED MAY 2001 APPLICATION INFORMATION output voltage programming The output voltage of the TPS77001 adjustable regulator is programmed using an external resistor divider as shown in Figure 22. The output voltage is calculated using: V O ǒ) Ǔ + Vref 1 R1 R2 (1) where Vref = 1.
PAGE 14
TPS77001, TPS77012, TPS77015, TPS77018, TPS77025 TPS77027, TPS77028, TPS77030, TPS77033, TPS77050 ULTRALOW-POWER 50-mA LOW-DROPOUT LINEAR REGULATORS SLVS210D – JUNE 1999 – REVISED MAY 2001 APPLICATION INFORMATION power dissipation and junction temperature Specified regulator operation is assured to a junction temperature of 125°C; the maximum junction temperature should be restricted to 125°C under normal operating conditions.
PAGE 15
PACKAGE OPTION ADDENDUM www.ti.
PAGE 16
PACKAGE OPTION ADDENDUM www.ti.
PAGE 17
PACKAGE OPTION ADDENDUM www.ti.com Orderable Device 10-Jun-2014 Status (1) TPS77050DBVTG4 ACTIVE Package Type Package Pins Package Drawing Qty SOT-23 DBV 5 250 Eco Plan Lead/Ball Finish MSL Peak Temp (2) (6) (3) Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Op Temp (°C) Device Marking (4/5) PCYI (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs.
PAGE 18
PACKAGE OPTION ADDENDUM www.ti.
PAGE 19
PACKAGE MATERIALS INFORMATION www.ti.com 30-Dec-2013 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) TPS77001DBVR SOT-23 DBV 5 3000 178.0 9.0 B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant 3.23 3.17 1.37 4.0 8.0 Q3 TPS77001DBVT SOT-23 DBV 5 250 178.0 9.0 3.23 3.17 1.37 4.0 8.0 Q3 TPS77012DBVR SOT-23 DBV 5 3000 179.0 8.4 3.2 3.2 1.4 4.0 8.
PAGE 20
PACKAGE MATERIALS INFORMATION www.ti.com 30-Dec-2013 Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) TPS77033DBVR SOT-23 DBV 5 3000 178.0 9.0 TPS77033DBVT SOT-23 DBV 5 250 178.0 9.0 TPS77050DBVR SOT-23 DBV 5 3000 178.0 9.0 3.3 TPS77050DBVT SOT-23 DBV 5 250 178.0 9.0 3.23 W Pin1 (mm) Quadrant 3.23 3.17 1.37 4.0 8.0 Q3 3.23 3.17 1.37 4.0 8.0 Q3 3.2 1.4 4.0 8.0 Q3 3.17 1.37 4.0 8.
PAGE 21
PACKAGE MATERIALS INFORMATION www.ti.com 30-Dec-2013 Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) TPS77027DBVT SOT-23 DBV 5 250 180.0 180.0 18.0 TPS77028DBVR SOT-23 DBV 5 3000 180.0 180.0 18.0 TPS77028DBVT SOT-23 DBV 5 250 180.0 180.0 18.0 TPS77030DBVR SOT-23 DBV 5 3000 180.0 180.0 18.0 TPS77030DBVT SOT-23 DBV 5 250 180.0 180.0 18.0 TPS77033DBVR SOT-23 DBV 5 3000 180.0 180.0 18.
PAGE 22
PAGE 23
PAGE 24
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.