Datasheet

Schematic and Bill of Materials

www.ti.com

Table 2. TPS7A4100EVM-709 Bill of Materials

COUNT RefDes Value Description Size Part Number MFR

1 C1 2.2 uF Capacitor, Ceramic, 100V, X7R, 10% 1210 STD STD

1 C2 0.01uF Capacitor, Ceramic, Low Inductance, 0603 STD STD

100V, X7R, 20%

1 C3 10.0 uF Capacitor, Ceramic, 35V, X7R, 10% 1210 STD STD

1 J1 PEC03SAAN Header, Male 3-pin, 100mil spacing 0.100 inch x 3 PEC03SAAN Sullins

4 J2, J3, J4, J5 PEC02SAAN Header, Male 2-pin, 100mil spacing 0.100 inch x 2 PEC02SAAN Sullins

1 R1 107K Resistor, Chip, 1/16W, 1% 0603 STD STD

1 R2 59K Resistor, Chip, 1/16W, 1% 0603 STD STD

1 U1 TPS7A4001DGN IC, 120 V Input Voltage, 50 mA DGN TPS7A4001DGN TI

1 -- -- PCB, 1.260In x 2.370 In x 0.062 In -- HPA709 Any

1 -- -- Shunt, 100-mil, Black 0.100 inch 929950-00 3M

Notes: 1. These assemblies are ESD sensitive, ESD precautions shall be observed.

2. These assemblies must be clean and free from flux and all contaminants.

3. These assemblies must comply with workmanship standards IPC-A-610 Class 2.

4. Ref designators marked with an asterisk ('**') cannot be substituted. All other components can be substituted with equivalent MFG's components.

TPS7A4001EVM-709 SLVU448–March 2011

Submit Documentation Feedback