User's Manual

TI PROPRIETARY T E X A S I N S T R U M E N T S
INFORMATION -
Revision:
INTERNAL DATA R F I D SYSTEMS 0
S P E C I F I C A T I O N
Page 11 of 25
xx-xx-xx-xxx
Printed copies are not controlled documents - verify the correct revision before use.
9. Quick Start
1. Plug TRF79x0ATB Module into microcontroller development platform of
choice.
Note: if DK-LM3S9B96 board, remove SDRAM module and replace with
DK-LM3S9B96-EM2 interface board before attempting to mount
TRF79x0ATB module.
2. Apply power
3. Load base application firmware specific to platform working with.
4. Test for basic communication and functionality
5. Modify and Debug code as desired for specific application or protocol
6. Test for advanced functionality as implemented by modified code.
10. Base Application Firmware
TRF79x0ATB Module Base Application Firmware for various Texas
Instruments Microcontrollers and Microprocessors is available here:
MSP430F23xx:
http://www.ti.com/litv/zip/sloc203 (CCS or IAR)
MSP430F5438A: http://focus.ti.com/docs/toolsw/folders/print/msp-exp430f5438.html
LM3S9B96: http://focus.ti.com/docs/toolsw/folders/print/dk-lm3s9b96.html
11. Platform Specific Details
 DK-LM3S9B96 Platform
o Mifare Specific Standalone Demo source code available
 This code demonstrates (on up to two cards at a time)
reading, authenticating and interacting with the Blocks
and Sectors of Mifare Classic 1k and 4k transponders.
 MSP-EXP430F5438A Experimenters Board
o Code Example interfaces with standard TRF7960EVM GUI
 http://www.ti.com/litv/zip/sloc134 (GUI)
 http://www.ti.com/lit/pdf/slou192 (GUI Users Guide)
o ISO15693 UID & Block 0 Read/Automatic Product ID Demo
 This code displays a single ISO15693 UID, RSSI Value
& Block 0 Read/Automatic Product ID Demo on the
LCD. If more tags are in the field, or a different
protocol is desired, it requires use of the TRF7960 PC
based GUI to display multiple tags or interact with other
protocol based transponders.