Datasheet

ManualsBrandsTEXAS INSTRUMENTS ManualsInterface ICsInterface IC - analogue switches SOT 23 5

FEATURES

DESCRIPTION/ORDERING INFORMATION

TS12A4514 , , TS12A4515

www.ti.com

................................................................................................................................................... SCDS193D – AUGUST 2006 – REVISED MARCH 2009

SPST CMOS ANALOG SWITCHES

• 2-V to 12-V Single-Supply Operation • Specified Low ON-Leakage Currents:

• Specified ON-State Resistance: – 1 nA at 25 ° C

– 15 Ω Max With 12-V Supply – 10 nA at 85 ° C

– 20 Ω Max With 5-V Supply • Low Charge Injection: 11.5 pC (12-V Supply)

– 50 Ω Max With 3.3-V Supply • Fast Switching Speed:

= 80 ns, t

OFF

= 50 ns (12-V Supply)

• Specified Low OFF-Leakage Currents:

• Break-Before-Make Operation (t

> t

OFF

)

– 1 nA at 25 ° C

• TTL/CMOS-Logic Compatible With 5-V Supply

– 10 nA at 85 ° C

The TS12A4514/TS12A4515 are single pole/single throw (SPST), low-voltage, single-supply CMOS analog

switches, with very low switch ON-state resistance. The TS12A4514 is normally open (NO). The TS12A4515 is

normally closed (NC).

These CMOS switches can operate continuously with a single supply between 2 V and 12 V. Each switch can

handle rail-to-rail analog signals. The OFF-leakage current maximum is only 1 nA at 25 ° C or 10 nA at 85 ° C.

All digital inputs have 0.8-V to 2.4-V logic thresholds, ensuring TTL/CMOS-logic compatibility when using a 5-V

supply.

For pin-compatible parts for use with dual supplies, see the TS12A4516/TS12A4517.

ORDERING INFORMATION

PACKAGE

(1) (2)

ORDERABLE PART NUMBER TOP-SIDE MARKING

(3)

PDIP – P Reel of 1000 TS12A4514P TS12A4514P

Reel of 1500 TS12A4514D

SOIC – D YD514

Reel of 2500 TS12A4514DR

SOP (SOT-23) – DBV Reel of 3000 TS12A4514DBVR 9CJ_

– 40 ° C to 85 ° C

PDIP – P Reel of 1000 TS12A4515P TS12A4515P

Reel of 1500 TS12A4515D

SOIC – D YD515

Reel of 2500 TS12A4515DR

SOP (SOT-23) – DBV Reel of 3000 TS12A4515DBVR 9CK_

(1) Package drawings, thermal data, and symbolization are available at www.ti.com/packaging .

(2) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI

website at www.ti.com .

(3) DBV: The last character designates assembly/test Site

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas

Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

PRODUCTION DATA information is current as of publication date.

Products conform to specifications per the terms of the Texas

Instruments standard warranty. Production processing does not

necessarily include testing of all parameters.

Summary of content (18 pages)

PAGE 1
TS12A4514,, TS12A4515 www.ti.com ................................................................................................................................................... SCDS193D – AUGUST 2006 – REVISED MARCH 2009 SPST CMOS ANALOG SWITCHES FEATURES 1 • • • 2-V to 12-V Single-Supply Operation Specified ON-State Resistance: – 15 Ω Max With 12-V Supply – 20 Ω Max With 5-V Supply – 50 Ω Max With 3.
PAGE 2
TS12A4514,, TS12A4515 SCDS193D – AUGUST 2006 – REVISED MARCH 2009 ................................................................................................................................................... www.ti.com PIN CONFIGURATIONS COM 1 8 NO N.C. 2 7 GND N.C. 3 6 IN V+ 4 5 N.C. INPUT LOW HIGH TS12A4514 SOT-23 PACKAGE (TOP VIEW) TS12A4515 D OR P PACKAGE (TOP VIEW) TS12A4514 D OR P PACKAGE (TOP VIEW) COM 1 8 NC N.C. 2 7 GND N.C. 3 6 IN V+ 4 5 N.C.
PAGE 3
TS12A4514,, TS12A4515 www.ti.com ................................................................................................................................................... SCDS193D – AUGUST 2006 – REVISED MARCH 2009 Electrical Characteristics for 5-V Supply (1) V+ = 4.5 V to 5.5 V, VINH = 2.4 V, VINL = 0.
PAGE 4
TS12A4514,, TS12A4515 SCDS193D – AUGUST 2006 – REVISED MARCH 2009 ................................................................................................................................................... www.ti.com Electrical Characteristics for 12-V Supply (1) V+ = 11.4 V to 12.6 V, VINH = 5 V, VINL = 0.
PAGE 5
TS12A4514,, TS12A4515 www.ti.com ................................................................................................................................................... SCDS193D – AUGUST 2006 – REVISED MARCH 2009 Electrical Characteristics for 3-V Supply (1) V+ = 3 V to 3.6 V, TA = –40°C to 85°C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS MIN TYP (2) TA MAX UNIT Analog Switch Analog signal range VCOM, VNO, VNC 0 V+ ON-state resistance ron V+ = 3 V, VCOM = 1.
PAGE 6
TS12A4514,, TS12A4515 SCDS193D – AUGUST 2006 – REVISED MARCH 2009 ................................................................................................................................................... www.ti.com PIN DESCRIPTION (1) PIN NO. TS12A4514 (1) 6 TS12A4515 D, P SOT-23 NAME D, P SOT-23 DESCRIPTION 1 1 1 1 COM Common 2, 3, 5 – 2, 3, 5 – N.C.
PAGE 7
TS12A4514,, TS12A4515 www.ti.com ................................................................................................................................................... SCDS193D – AUGUST 2006 – REVISED MARCH 2009 APPLICATION INFORMATION Power-Supply Considerations The TS12A4514/TS12A4515 construction is typical of most CMOS analog switches, except that they have only two supply pins: V+ and GND. V+ and GND drive the internal CMOS switches and set their analog voltage limits.
PAGE 8
TS12A4514,, TS12A4515 SCDS193D – AUGUST 2006 – REVISED MARCH 2009 ................................................................................................................................................... www.ti.com V+ V+ V+ NO 0V VNO TS12A4514 VIN IN 50% VIN VNOPEAK COM 90% 90% VOUT VOUT GND 50 Ω 35 pF 300 Ω 0V tOFF tON V+ V+ V+ 0V VNO NC TS12A4515 VIN VNOPEAK COM IN 50% VIN GND 50 Ω 90% VOUT VOUT 35 pF 300 Ω 90% 0V tON tOFF Figure 2.
PAGE 9
PACKAGE OPTION ADDENDUM www.ti.
PAGE 10
PACKAGE OPTION ADDENDUM www.ti.com 20-May-2013 (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined.
PAGE 11
PACKAGE MATERIALS INFORMATION www.ti.com 14-Jul-2012 TAPE AND REEL INFORMATION *All dimensions are nominal Device TS12A4514DBVR Package Package Pins Type Drawing SPQ SOT-23 Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant DBV 5 3000 179.0 8.4 3.2 3.2 1.4 4.0 8.0 Q3 TS12A4514DR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 TS12A4515DBVR SOT-23 DBV 5 3000 179.0 8.4 3.2 3.2 1.4 4.0 8.
PAGE 12
PACKAGE MATERIALS INFORMATION www.ti.com 14-Jul-2012 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) TS12A4514DBVR SOT-23 DBV 5 3000 203.0 203.0 35.0 TS12A4514DR SOIC D 8 2500 367.0 367.0 35.0 TS12A4515DBVR SOT-23 DBV 5 3000 203.0 203.0 35.0 TS12A4515DR SOIC D 8 2500 367.0 367.0 35.
PAGE 13
PAGE 14
PAGE 15
PAGE 16
PAGE 17
PAGE 18
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.