Datasheet

ManualsBrandsTEXAS INSTRUMENTS ManualsInterface ICsInterface IC - analogue switches DSBGA 10

FEATURES

APPLICATIONS

DGS PACKAGE

(TOP VIEW)

V+

NO1

COM1

IN1

NC1

NO2

COM2

IN2

NC2

GND

COM1

V+

NO1

IN1

NC1

NO2

COM2

IN2

NC2

GND

DRC PACKAGE

(TOP VIEW)

YZP PACKAGE

(TOP-THROUGH VIEW)

DESCRIPTION/ORDERING INFORMATION

TS3A24159

0.3- Ω DUAL SPDT ANALOG SWITCH

DUAL-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER

SCDS238C – MARCH 2007 – REVISED FEBRUARY 2008

www.ti.com

• Specified Break-Before-Make Switching

• Low ON-State Resistance (0.3 Ω Max)

• Low Charge Injection

• Excellent ON-State Resistance Matching

• Low Total Harmonic Distortion (THD)

• 1.65-V to 3.6-V Single-Supply Operation

• Control Inputs Are 1.8-V Logic Compatible

• Latch-Up Performance Exceeds 100 mA Per

JESD 78, Class II

• ESD Performance Tested Per JESD 22

– 2000-V Human-Body Model

(A114-B, Class II)

– 1000-V Charged-Device Model (C101)

• Cell Phones

• PDAs

• Portable Instrumentation

• Audio and Video Signal Routing

• Low-Voltage Data-Acquisition Systems

• Communication Circuits

• Modems

• Hard Drives

• Computer Peripherals

• Wireless Terminals and Peripherals

YZP PACKAGE TERMINAL ASSIGNMENTS

D NO2 V+ NO1

C COM2 COM1

B IN2 IN1

A NC2 GND NC1

3 2 1

The TS3A24159 is a dual single-pole double-throw (SPDT) analog switch that is designed to operate from 1.65 V

to 3.6 V. It offers low ON-state resistance and excellent ON-state resistance matching with the

break-before-make feature, to prevent signal distortion during the transferring of a signal from one channel to

another. The device has excellent total harmonic distortion (THD) performance and consumes very low power.

These features make this device suitable for portable audio applications.

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of

Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

2 NanoFree is a trademark of Texas Instruments.

PRODUCTION DATA information is current as of publication date.

Products conform to specifications per the terms of the Texas

Instruments standard warranty. Production processing does not

necessarily include testing of all parameters.

Summary of content (30 pages)

PAGE 1
www.ti.com TS3A24159 0.3-Ω DUAL SPDT ANALOG SWITCH DUAL-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER SCDS238C – MARCH 2007 – REVISED FEBRUARY 2008 FEATURES 1 • • • • • • • • 2 • DGS PACKAGE (TOP VIEW) Specified Break-Before-Make Switching Low ON-State Resistance (0.3 Ω Max) Low Charge Injection Excellent ON-State Resistance Matching Low Total Harmonic Distortion (THD) 1.65-V to 3.6-V Single-Supply Operation Control Inputs Are 1.
PAGE 2
TS3A24159 0.3-Ω DUAL SPDT ANALOG SWITCH DUAL-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER www.ti.com SCDS238C – MARCH 2007 – REVISED FEBRUARY 2008 ORDERING INFORMATION TA –40°C to 85°C (1) (2) PACKAGE (1) (2) ORDERABLE PART NUMBER TOP-SIDE MARKING NanoFree™ (DSBGA) – YZP Reel of 3000 TS3A24159YZPR L87 VSSOP – DGS (MSOP) Reel of 2500 TS3A24159DGSR L8R SON – DRC Reel of 3000 TS3A24159DRCR ZWS Package drawings, thermal data, and symbolization are available at www.ti.com/packaging.
PAGE 3
TS3A24159 0.3-Ω DUAL SPDT ANALOG SWITCH DUAL-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER www.ti.com SCDS238C – MARCH 2007 – REVISED FEBRUARY 2008 ABSOLUTE MAXIMUM RATINGS (1) (2) over operating free-air temperature range (unless otherwise noted) MIN MAX V+ Supply voltage range (3) –0.5 3.6 V VNC VNO VCOM Analog voltage range (3) (4) (5) –0.5 V+ + 0.5 V II/OK Analog port diode current –50 50 INC INO ICOM ON-state switch current –300 300 –500 500 VI Digital input voltage range –0.5 3.
PAGE 4
TS3A24159 0.3-Ω DUAL SPDT ANALOG SWITCH DUAL-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER www.ti.com SCDS238C – MARCH 2007 – REVISED FEBRUARY 2008 ELECTRICAL CHARACTERISTICS FOR 3-V SUPPLY (1) V+ = 2.7 V to 3.
PAGE 5
TS3A24159 0.3-Ω DUAL SPDT ANALOG SWITCH DUAL-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER www.ti.com SCDS238C – MARCH 2007 – REVISED FEBRUARY 2008 ELECTRICAL CHARACTERISTICS FOR 3-V SUPPLY (continued) V+ = 2.7 V to 3.
PAGE 6
TS3A24159 0.3-Ω DUAL SPDT ANALOG SWITCH DUAL-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER www.ti.com SCDS238C – MARCH 2007 – REVISED FEBRUARY 2008 ELECTRICAL CHARACTERISTICS FOR 2.5-V SUPPLY (1) V+ = 2.3 V to 2.
PAGE 7
TS3A24159 0.3-Ω DUAL SPDT ANALOG SWITCH DUAL-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER www.ti.com SCDS238C – MARCH 2007 – REVISED FEBRUARY 2008 ELECTRICAL CHARACTERISTICS FOR 2.5-V SUPPLY (continued) V+ = 2.3 V to 2.
PAGE 8
TS3A24159 0.3-Ω DUAL SPDT ANALOG SWITCH DUAL-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER www.ti.com SCDS238C – MARCH 2007 – REVISED FEBRUARY 2008 ELECTRICAL CHARACTERISTICS FOR 1.8-V SUPPLY (1) V+ = 1.65 V to 1.
PAGE 9
TS3A24159 0.3-Ω DUAL SPDT ANALOG SWITCH DUAL-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER www.ti.com SCDS238C – MARCH 2007 – REVISED FEBRUARY 2008 ELECTRICAL CHARACTERISTICS FOR 1.8-V SUPPLY (continued) V+ = 1.65 V to 1.95 V, TA = –40°C to 85°C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS TA V+ MIN TYP MAX UNIT Dynamic 25°C 1.8 V Full 1.65 V to 1.95 V 25°C 1.8 V Full 1.65 V to 1.95 V 25°C 1.8 V 2 Full 1.65 V to 1.95 V 1 CL = 1 nF, See Figure 19 25°C 1.
PAGE 10
TS3A24159 0.3-Ω DUAL SPDT ANALOG SWITCH DUAL-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER www.ti.com SCDS238C – MARCH 2007 – REVISED FEBRUARY 2008 TYPICAL PERFORMANCE 0.500 0.400 0.450 0.350 0.400 0.300 0.350 0.250 ron (Ω) ron (Ω) 0.300 0.250 0.200 0.200 0.150 0.150 –40°C 0.100 –40°C 0.100 25°C 25°C 0.050 0.050 85°C 85°C VCOM (V) VCOM (V) Figure 1. ron vs VCOM (V+ = 1.65 V) Figure 2. ron vs VCOM (V+ = 2.3 V) 0.350 50 0.300 0 2.21 2.07 1.93 1.79 1.66 1.52 1.38 1.24 1 .10 0.
PAGE 11
TS3A24159 0.3-Ω DUAL SPDT ANALOG SWITCH DUAL-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER www.ti.com SCDS238C – MARCH 2007 – REVISED FEBRUARY 2008 35 0 3.0 V tON 30 –2 tOFF –4 25 Gain (dB) tON/tOFF (ns) –6 20 15 10 –8 –10 –12 –14 5 –16 0 1.65 1.8 1.95 2.3 2.5 2.7 3 3.3 3.6 –18 Supply Voltage (V+) –20 1E+04 1E+05 1E+06 1E+07 1E+09 1E+08 Frequency (Hz) Figure 5. tON and tOFF vs Supply Voltage (TA = 25°C) Figure 6.
PAGE 12
TS3A24159 0.3-Ω DUAL SPDT ANALOG SWITCH DUAL-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER www.ti.com SCDS238C – MARCH 2007 – REVISED FEBRUARY 2008 PARAMETER MEASUREMENT INFORMATION V+ VNC NC COM + VCOM VNO NO Channel ON r on = IN VI ICOM VCOM –VNO or VNC W I COM VI = V IH or V IL + GND Figure 10. ON-State Resistance V+ VNC NC COM + VCOM + VNO NO IN VI OFF-State Leakage Current Channel OFF VI = V IH or V IL + GND Figure 11.
PAGE 13
TS3A24159 0.3-Ω DUAL SPDT ANALOG SWITCH DUAL-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER www.ti.com SCDS238C – MARCH 2007 – REVISED FEBRUARY 2008 PARAMETER MEASUREMENT INFORMATION (continued) V+ VNC NC COM + VNO NO VCOM ON-State Leakage Current Channel ON VI = V IH or V IL IN VI + GND Figure 13.
PAGE 14
TS3A24159 0.3-Ω DUAL SPDT ANALOG SWITCH DUAL-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER www.ti.com SCDS238C – MARCH 2007 – REVISED FEBRUARY 2008 PARAMETER MEASUREMENT INFORMATION (continued) V+ NC or NO V+ Logic Input (VI) VNC or V NO VCOM 50% 0 COM NC or NO CL(2) VI 90% RL 90% (VCOM) IN tBBM Logic Input(1) VNC or VNO = V+ RL = 50 W CL = 35 pF GND (1) All input pulses are supplied by generators having the following characteristics: PRR ≤ 10 MHz, ZO = 50 Ω, tr < 5 ns, tf < 5 ns.
PAGE 15
TS3A24159 0.3-Ω DUAL SPDT ANALOG SWITCH DUAL-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER www.ti.com SCDS238C – MARCH 2007 – REVISED FEBRUARY 2008 PARAMETER MEASUREMENT INFORMATION (continued) V+ Network Analyzer Channel OFF: NC to COM 50 VNC NC VI = V + or GND COM Source Signal 50 VCOM NO Network Analyzer Setup IN Source Power = 0 dBm (632-mV P-P at 50- load) VI 50 + GND DC Bias = 350 mV Figure 17.
PAGE 16
TS3A24159 0.3-Ω DUAL SPDT ANALOG SWITCH DUAL-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER www.ti.com SCDS238C – MARCH 2007 – REVISED FEBRUARY 2008 PARAMETER MEASUREMENT INFORMATION (continued) V+ RGEN VGEN OFF ON OFF V IL NC or NO COM + VIH Logic Input (VI) VCOM ∆VCOM VCOM NC or NO CL(2) VI VGEN = 0 to V+ IN Logic Input(1) RGEN = 0 CL = 1 nF QC = C L ×⋅∆VCOM VI = V IH or V IL GND A.
PAGE 17
PACKAGE OPTION ADDENDUM www.ti.
PAGE 18
PACKAGE OPTION ADDENDUM www.ti.com 20-May-2013 Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties.
PAGE 19
PACKAGE MATERIALS INFORMATION www.ti.com 19-Nov-2012 TAPE AND REEL INFORMATION *All dimensions are nominal Device TS3A24159DGSR Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant 3.4 1.4 8.0 12.0 Q1 VSSOP DGS 10 2500 330.0 12.4 5.3 TS3A24159DRCR SON DRC 10 3000 330.0 12.4 3.3 3.3 1.1 8.0 12.0 Q2 TS3A24159YZPR DSBGA YZP 10 3000 180.0 8.4 1.5 2.03 0.7 4.0 8.
PAGE 20
PACKAGE MATERIALS INFORMATION www.ti.com 19-Nov-2012 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) TS3A24159DGSR VSSOP DGS 10 2500 358.0 335.0 35.0 TS3A24159DRCR SON DRC 10 3000 367.0 367.0 35.0 TS3A24159YZPR DSBGA YZP 10 3000 220.0 220.0 34.
PAGE 21
PAGE 22
PAGE 23
PAGE 24
PAGE 25
D: Max = 1.89 mm, Min = 1.83 mm E: Max = 1.39 mm, Min = 1.
PAGE 26
PACKAGE OPTION ADDENDUM www.ti.
PAGE 27
PACKAGE OPTION ADDENDUM www.ti.com 20-May-2013 Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties.
PAGE 28
PACKAGE MATERIALS INFORMATION www.ti.com 19-Nov-2012 TAPE AND REEL INFORMATION *All dimensions are nominal Device TS3A24159DGSR Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant 3.4 1.4 8.0 12.0 Q1 VSSOP DGS 10 2500 330.0 12.4 5.3 TS3A24159DRCR SON DRC 10 3000 330.0 12.4 3.3 3.3 1.1 8.0 12.0 Q2 TS3A24159YZPR DSBGA YZP 10 3000 180.0 8.4 1.5 2.03 0.7 4.0 8.
PAGE 29
PACKAGE MATERIALS INFORMATION www.ti.com 19-Nov-2012 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) TS3A24159DGSR VSSOP DGS 10 2500 358.0 335.0 35.0 TS3A24159DRCR SON DRC 10 3000 367.0 367.0 35.0 TS3A24159YZPR DSBGA YZP 10 3000 220.0 220.0 34.
PAGE 30
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.