Datasheet

ManualsBrandsTEXAS INSTRUMENTS ManualsInterface ICsInterface IC - analogue switches VQFN 16

FEATURES

DESCRIPTION

APPLICATIONS

1EN

RGY PACKAGE

(TOP VIEW)

Exposed

Center

Pad

If exposed center pad is used, it must be

connected as a secondary ground

or left electrically open.

IN2

2EN

IN1

GND 2D

8 9

Logic

Control

Logic

Control

D, DBQ, DGV, OR PW PACKAGE

(TOP VIEW)

1EN

IN2

GND

2EN

IN1

8 9

IN2

2EN

IN1

GND

RSV PACKAGE

(TOP VIEW)

TS3A5017

www.ti.com

.......................................................................................................................................... SCDS188D – JANUARY 2005 – REVISED DECEMBER 2008

DUAL SP4T ANALOG SWITCH

3.3-V/2.5-V DUAL 4:1 ANALOG MULTIPLEXER/DEMULTIPLEXER

• Isolation in the Powered-Down Mode, V

= 0

• Low ON-State Resistance

The TS3A5017 is a dual single-pole quadruple-throw

(4:1) analog switch that is designed to operate from

• Low Charge Injection

2.3 V to 3.6 V. This device can handle both digital

• Excellent ON-State Resistance Matching

and analog signals, and signals up to V

can be

• Low Total Harmonic Distortion (THD)

transmitted in either direction.

• 2.3-V to 3.6-V Single-Supply Operation

FUNCTION TABLE

• Latch-Up Performance Exceeds 100 mA Per

D TO S,

JESD 78, Class II

EN IN2 IN1

S TO D

• ESD Performance Tested Per JESD 22

L L L D = S

– 2000-V Human-Body Model

L L H D = S

(A114-B, Class II)

L H L D = S

L H H D = S

– 1000-V Charged-Device Model (C101)

H X X OFF

• Sample-and-Hold Circuits

• Battery-Powered Equipment

• Audio and Video Signal Routing

• Communication Circuits

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas

Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

PRODUCTION DATA information is current as of publication date.

Products conform to specifications per the terms of the Texas

Instruments standard warranty. Production processing does not

necessarily include testing of all parameters.

Summary of content (32 pages)

PAGE 1
TS3A5017 www.ti.com .......................................................................................................................................... SCDS188D – JANUARY 2005 – REVISED DECEMBER 2008 DUAL SP4T ANALOG SWITCH 3.3-V/2.5-V DUAL 4:1 ANALOG MULTIPLEXER/DEMULTIPLEXER FEATURES 1 • • • • • • • • DESCRIPTION Isolation in the Powered-Down Mode, V+ = 0 Low ON-State Resistance Low Charge Injection Excellent ON-State Resistance Matching Low Total Harmonic Distortion (THD) 2.3-V to 3.
PAGE 2
TS3A5017 SCDS188D – JANUARY 2005 – REVISED DECEMBER 2008 .......................................................................................................................................... www.ti.
PAGE 3
TS3A5017 www.ti.com ..........................................................................................................................................
PAGE 4
TS3A5017 SCDS188D – JANUARY 2005 – REVISED DECEMBER 2008 .......................................................................................................................................... www.ti.com ELECTRICAL CHARACTERISTICS FOR 3.3-V SUPPLY (1) V+ = 2.7 V to 3.
PAGE 5
TS3A5017 www.ti.com .......................................................................................................................................... SCDS188D – JANUARY 2005 – REVISED DECEMBER 2008 ELECTRICAL CHARACTERISTICS FOR 3.3-V SUPPLY (continued) V+ = 2.7 V to 3.6 V, TA = –40°C to 85°C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS TA V+ MIN TYP MAX UNIT Dynamic Turn-on time tON VD = 2 V, RL = 300 Ω, CL = 35 pF, See Figure 17 25°C 3.3 V 1 5 9.5 Full 3 V to 3.
PAGE 6
TS3A5017 SCDS188D – JANUARY 2005 – REVISED DECEMBER 2008 .......................................................................................................................................... www.ti.com ELECTRICAL CHARACTERISTICS FOR 2.5-V SUPPLY (1) V+ = 2.3 V to 2.
PAGE 7
TS3A5017 www.ti.com .......................................................................................................................................... SCDS188D – JANUARY 2005 – REVISED DECEMBER 2008 ELECTRICAL CHARACTERISTICS FOR 2.5-V SUPPLY (continued) V+ = 2.3 V to 2.7 V, TA = –40°C to 85°C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS TA V+ MIN 25°C 2.5 V 1.5 Full 2.3 V to 2.7 V 25°C 2.5 V 0.3 Full 2.3 V to 2.7 V 0.
PAGE 8
TS3A5017 SCDS188D – JANUARY 2005 – REVISED DECEMBER 2008 .......................................................................................................................................... www.ti.com TYPICAL PERFORMANCE 18 12 TA = 25°C 16 10 V+ = 2.5 V 14 85°C 8 10 rON (Ω) rON (Ω) 12 8 6 V+ = 3.3 V 25°C 6 4 4 2 –40°C 2 0 0 1 3 2 VCOM (V) 4 0 0.0 0.5 Figure 1. ron vs VCOM 1.0 Leakage Current (nA) 12 rON (Ω) 3.0 3.5 INC(ON) 14 85°C 10 25°C 6 4 2 0 0.
PAGE 9
TS3A5017 www.ti.com .......................................................................................................................................... SCDS188D – JANUARY 2005 – REVISED DECEMBER 2008 TYPICAL PERFORMANCE (continued) 2.0 5.0 1.8 tON /tOFF (ns) 4.0 Logic-Level Threshold (nA) 4.5 tON 3.5 3.0 2.5 2.0 tOFF 1.5 1.0 1.6 VIH 1.4 VIL 1.2 1.0 0.8 0.6 0.4 0.5 0.2 0.0 0.0 2.0 –40 25 85 2.2 2.4 TA (°C) 2.6 2.8 3.0 3.2 3.4 V+ (V) 3.6 3.8 4.0 Figure 7.
PAGE 10
TS3A5017 SCDS188D – JANUARY 2005 – REVISED DECEMBER 2008 .......................................................................................................................................... www.ti.com PIN DESCRIPTION 10 PIN NO.
PAGE 11
TS3A5017 www.ti.com ..........................................................................................................................................
PAGE 12
TS3A5017 SCDS188D – JANUARY 2005 – REVISED DECEMBER 2008 .......................................................................................................................................... www.ti.com PARAMETER MEASUREMENT INFORMATION Channel ON V – VS2-S4 or Vs1 ron = D Ω ID VI = VIH or VIL Figure 13. ON-State Resistance (ron) OFF-State Leakage Current Channel OFF VI = VIH or VIL VS1 or VS2-S4 = 0 to V+ and VD = V+ to 0 Figure 14.
PAGE 13
TS3A5017 www.ti.com .......................................................................................................................................... SCDS188D – JANUARY 2005 – REVISED DECEMBER 2008 PARAMETER MEASUREMENT INFORMATION (continued) VBIAS = V+ to GND VI = VIH or VIL Capacitance is measured at S1, S2-S4, D, and IN inputs during ON and OFF conditions. Figure 16. Capacitance (CI, CD(OFF), CD(ON), CS(OFF), CS(ON)) CL 300 Ω 35 pF 300 Ω 35 pF (C) (B) V+ (B) 0 (A) tOFF A.
PAGE 14
TS3A5017 SCDS188D – JANUARY 2005 – REVISED DECEMBER 2008 .......................................................................................................................................... www.ti.com PARAMETER MEASUREMENT INFORMATION (continued) Channel ON: S1 to D VI = V+ or GND 50 Ω Network Analyzer Setup Source Power = 0 dBm (632-mV P-P at 50-Ω load) 50 Ω DC Bias = 350 mV Figure 18.
PAGE 15
TS3A5017 www.ti.com .......................................................................................................................................... SCDS188D – JANUARY 2005 – REVISED DECEMBER 2008 PARAMETER MEASUREMENT INFORMATION (continued) 50 Ω V1S Channel ON: S1 to D 1S1 1D V2S 2S1 50 Ω 2D Network Analyzer Setup Source Power = 0 dBm (632-mV P-P at 50-Ω load) 50 Ω DC Bias = 350 mV Figure 21. Adjacent Crosstalk (XTALK) VIH VIL ΔVD VGEN = 0 to V+ RGEN = 0 CL = 0.
PAGE 16
TS3A5017 SCDS188D – JANUARY 2005 – REVISED DECEMBER 2008 .......................................................................................................................................... www.ti.com PARAMETER MEASUREMENT INFORMATION (continued) 10 µF 10 µF (A) 600 Ω 600 Ω 600 Ω A. CL includes probe and jig capacitance. Figure 23.
PAGE 17
PACKAGE OPTION ADDENDUM www.ti.
PAGE 18
PACKAGE OPTION ADDENDUM www.ti.
PAGE 19
PACKAGE OPTION ADDENDUM www.ti.com 24-Jan-2013 In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
PAGE 20
PACKAGE MATERIALS INFORMATION www.ti.com 14-Jul-2012 TAPE AND REEL INFORMATION *All dimensions are nominal Device TS3A5017DGVR Package Package Pins Type Drawing TVSOP SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant DGV 16 2000 330.0 12.4 6.8 4.0 1.6 8.0 12.0 Q1 TS3A5017DR SOIC D 16 2500 330.0 16.4 6.5 10.3 2.1 8.0 16.0 Q1 TS3A5017PWR TSSOP PW 16 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.
PAGE 21
PACKAGE MATERIALS INFORMATION www.ti.com 14-Jul-2012 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) TS3A5017DGVR TVSOP DGV 16 2000 367.0 367.0 35.0 TS3A5017DR SOIC D 16 2500 333.2 345.9 28.6 TS3A5017PWR TSSOP PW 16 2000 367.0 367.0 35.0 TS3A5017RGYR VQFN RGY 16 3000 367.0 367.0 35.0 TS3A5017RSVR UQFN RSV 16 3000 203.0 203.0 35.
PAGE 22
PAGE 23
PAGE 24
PAGE 25
PAGE 26
PAGE 27
PAGE 28
PAGE 29
PAGE 30
PAGE 31
PAGE 32
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.