Datasheet

ManualsBrandsTEXAS INSTRUMENTS ManualsInterface ICsInterface IC - multiplexers, demultiplexers TSSOP 48

www.ti.com

FEATURES

DGG OR DGV PACKAGE

(TOP VIEW)

GND

SEL

GND

NC − No internal connection

APPLICATIONS

DESCRIPTION/ORDERING INFORMATION

TS3DV416

4-CHANNEL DIFFERENTIAL 8:16 MULTIPLEXER SWITCH

FOR DVI/HDMI APPLICATIONS

SCDS198C – OCTOBER 2005 – REVISED MAY 2006

• Compatible With HDMI v1.2a (Type A) DVI 1.0

High-Speed Digital Interface

– Wide Bandwidth of Over 1.65 Gbps

(Bandwidth 1.8 Gbps Typ)

– 165-MHz Speed Operation

– Serial Data Stream at 10 × Pixel Clock Rate

– Supports All Video Formats up to 1080p

and SXGA (1280 × 1024 at 75 Hz)

– Total Raw Capacity 4.95 Gbps (Single Link)

– HDCP Compatible

• Low Crosstalk (X

TALK

= –41 dB Typ)

• Low Bit-to-Bit Skew (t

sk(o)

= 0.2 ns Max)

• Low and Flat ON-State Resistance

= 4 Ω Typ, r

on(flat)

= 0.7 Ω Typ)

• Low Input/Output Capacitance

= 10 pF Typ)

• Rail-to-Rail Switching on Data I/O Ports

(0 to 5 V)

• V

Operating Range From 3 V to 3.6 V

• I

off

Supports Partial-Power-Down Mode

Operation

• Latch-Up Performance Exceeds 100 mA Per

JESD 78, Class II

• ESD Performance Tested Per JESD 22

– 2000-V Human-Body Model

(A114-B, Class II)

– 1000-V Charged-Device Model (C101)

• Digital Video Signal Switching

• Differential DVI, HDMI Signal Multiplexing for

Audio/Video Receivers and High-Definition

Television (HDTV)

The TS3DV416 is a 16-bit to 8-bit multiplexer/demultiplexer digital video switch with a single select (SEL) input.

SEL controls the data path of the multiplexer/demultiplexer.

The device provides a low and flat ON-state resistance (r

) and an excellent ON-state resistance match. Low

input/output capacitance, high bandwidth, low skew, and low crosstalk among channels make this device

suitable for various digital video applications, such as DVI and HDMI.

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas

Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

PRODUCTION DATA information is current as of publication date.

Products conform to specifications per the terms of the Texas

Instruments standard warranty. Production processing does not

necessarily include testing of all parameters.

Summary of content (18 pages)

PAGE 1
TS3DV416 4-CHANNEL DIFFERENTIAL 8:16 MULTIPLEXER SWITCH FOR DVI/HDMI APPLICATIONS www.ti.com SCDS198C – OCTOBER 2005 – REVISED MAY 2006 FEATURES • • • • • • • • • • Compatible With HDMI v1.2a (Type A) DVI 1.0 High-Speed Digital Interface – Wide Bandwidth of Over 1.65 Gbps (Bandwidth 1.8 Gbps Typ) – 165-MHz Speed Operation – Serial Data Stream at 10× Pixel Clock Rate – Supports All Video Formats up to 1080p and SXGA (1280 × 1024 at 75 Hz) – Total Raw Capacity 4.
PAGE 2
TS3DV416 4-CHANNEL DIFFERENTIAL 8:16 MULTIPLEXER SWITCH FOR DVI/HDMI APPLICATIONS www.ti.com SCDS198C – OCTOBER 2005 – REVISED MAY 2006 ORDERING INFORMATION PACKAGE (1) TA –40°C to 85°C (1) ORDERABLE PART NUMBER TSSOP – DGG Tape and reel TS3DV416DGGR TS3DV416 TVSOP – DGV Tape and reel TS3DV416DGVR SD416 Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package.
PAGE 3
TS3DV416 4-CHANNEL DIFFERENTIAL 8:16 MULTIPLEXER SWITCH FOR DVI/HDMI APPLICATIONS www.ti.
PAGE 4
TS3DV416 4-CHANNEL DIFFERENTIAL 8:16 MULTIPLEXER SWITCH FOR DVI/HDMI APPLICATIONS www.ti.com SCDS198C – OCTOBER 2005 – REVISED MAY 2006 Absolute Maximum Ratings (1) over operating free-air temperature range (unless otherwise noted) MIN MAX VDD Supply voltage range –0.5 4.6 V VIN Control input voltage range (2) (3) –0.
PAGE 5
TS3DV416 4-CHANNEL DIFFERENTIAL 8:16 MULTIPLEXER SWITCH FOR DVI/HDMI APPLICATIONS www.ti.com SCDS198C – OCTOBER 2005 – REVISED MAY 2006 Electrical Characteristics (1) for high-frequency switching over recommended operating free-air temperature range, VDD = 3.3 V ± 0.3 V (unless otherwise noted) PARAMETER TEST CONDITIONS MIN TYP (2) MAX –0.7 –1.2 V UNIT VIK SEL VDD = 3.6 V, IIN = –18 mA IIH SEL VDD = 3.6 V, VIN = VDD ±1 µA IIL SEL VDD = 3.
PAGE 6
TS3DV416 4-CHANNEL DIFFERENTIAL 8:16 MULTIPLEXER SWITCH FOR DVI/HDMI APPLICATIONS www.ti.com SCDS198C – OCTOBER 2005 – REVISED MAY 2006 OPERATING CHARACTERISTICS 0 −1 −2 Gain − dB −3 −4 −5 −6 −7 −8 −9 1 10 100 1,000 10,000 Frequency − MHz Gain at 900 MHz, −3 dB Figure 1. Gain vs Frequency 0 −20 Off-Isolation − dB −40 −60 −80 −100 −120 1 10 100 1,000 Frequency − MHz OFF Isolation at 250 MHz, −39 dB Figure 2.
PAGE 7
TS3DV416 4-CHANNEL DIFFERENTIAL 8:16 MULTIPLEXER SWITCH FOR DVI/HDMI APPLICATIONS www.ti.com SCDS198C – OCTOBER 2005 – REVISED MAY 2006 OPERATING CHARACTERISTICS (continued) 0 −20 Crosstalk − dB −40 −60 −80 −100 −120 1 10 100 1,000 10,000 Frequency − MHz Crosstalk at 250 MHz, −41 dB Figure 3.
PAGE 8
TS3DV416 4-CHANNEL DIFFERENTIAL 8:16 MULTIPLEXER SWITCH FOR DVI/HDMI APPLICATIONS www.ti.
PAGE 9
TS3DV416 4-CHANNEL DIFFERENTIAL 8:16 MULTIPLEXER SWITCH FOR DVI/HDMI APPLICATIONS www.ti.com SCDS198C – OCTOBER 2005 – REVISED MAY 2006 PARAMETER MEASUREMENT INFORMATION (Enable and Disable Times) VDD Input Generator VIN 50 Ω 50 Ω VG1 TEST CIRCUIT DUT 2 × VDD Input Generator VI S1 RL VO Open GND 50 Ω 50 Ω VG2 CL (see Note A) RL TEST VDD S1 RL VI CL V∆ tPLZ/tPZL 3.3 V ± 0.3 V 2 × VDD 200 Ω GND 10 pF 0.3 V tPHZ/tPZH 3.3 V ± 0.3 V GND 200 Ω VDD 10 pF 0.
PAGE 10
TS3DV416 4-CHANNEL DIFFERENTIAL 8:16 MULTIPLEXER SWITCH FOR DVI/HDMI APPLICATIONS www.ti.com SCDS198C – OCTOBER 2005 – REVISED MAY 2006 PARAMETER MEASUREMENT INFORMATION (Skew) VDD Input Generator VIN 50 Ω 50 Ω VG1 TEST CIRCUIT DUT 2 × VDD Input Generator RL VO VI S1 Open GND 50 Ω 50 Ω VG2 CL (see Note A) RL TEST VDD S1 RL VI CL tsk(o) 3.3 V ± 0.3 V Open 200 Ω VDD or GND 10 pF tsk(p) 3.3 V ± 0.3 V Open 200 Ω VDD or GND 10 pF V∆ 3.5 V 2.5 V 1.
PAGE 11
TS3DV416 4-CHANNEL DIFFERENTIAL 8:16 MULTIPLEXER SWITCH FOR DVI/HDMI APPLICATIONS www.ti.com SCDS198C – OCTOBER 2005 – REVISED MAY 2006 PARAMETER MEASUREMENT INFORMATION EXT TRIGGER BIAS VBIAS Network Analyzer (HP8753ES) P1 P2 VDD A0 SEL 0B1 DUT CL = 10 pF (see Note A) VSEL NOTE A: CL includes probe and jig capacitance. Figure 6. Test Circuit for Frequency Response (BW) Frequency response is measured at the output of the ON channel.
PAGE 12
TS3DV416 4-CHANNEL DIFFERENTIAL 8:16 MULTIPLEXER SWITCH FOR DVI/HDMI APPLICATIONS www.ti.com SCDS198C – OCTOBER 2005 – REVISED MAY 2006 PARAMETER MEASUREMENT INFORMATION EXT TRIGGER BIAS VBIAS Network Analyzer (HP8753ES) P1 P2 VDD A0 0B1 RL = 100 Ω A1 1B1 0B2 DUT A2 1B2 2B1 RL = 100 Ω A3 3B1 2B2 3B2 SEL VSEL NOTES: A. CL includes probe and jig capacitance. B. A 50-Ω termination resistor is needed to match the loading of the network analyzer. Figure 7.
PAGE 13
TS3DV416 4-CHANNEL DIFFERENTIAL 8:16 MULTIPLEXER SWITCH FOR DVI/HDMI APPLICATIONS www.ti.com SCDS198C – OCTOBER 2005 – REVISED MAY 2006 PARAMETER MEASUREMENT INFORMATION EXT TRIGGER BIAS VBIAS Network Analyzer (HP8753ES) P1 P2 VDD A0 0B1 RL = 100 Ω A1 1B1 DUT 0B2 1B2 SEL VSEL NOTES: A. CL includes probe and jig capacitance. B. A 50-Ω termination resistor is needed to match the loading of the network analyzer. Figure 8.
PAGE 14
PACKAGE OPTION ADDENDUM www.ti.
PAGE 15
PACKAGE MATERIALS INFORMATION www.ti.com 11-Aug-2009 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant TS3DV416DGGR TSSOP DGG 48 2000 330.0 24.4 8.6 15.8 1.8 12.0 24.0 Q1 TS3DV416DGVR TVSOP DGV 48 2000 330.0 16.4 7.1 10.2 1.6 12.0 16.
PAGE 16
PACKAGE MATERIALS INFORMATION www.ti.com 11-Aug-2009 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) TS3DV416DGGR TSSOP DGG 48 2000 346.0 346.0 41.0 TS3DV416DGVR TVSOP DGV 48 2000 346.0 346.0 33.
PAGE 17
MECHANICAL DATA MTSS003D – JANUARY 1995 – REVISED JANUARY 1998 DGG (R-PDSO-G**) PLASTIC SMALL-OUTLINE PACKAGE 48 PINS SHOWN 0,27 0,17 0,50 48 0,08 M 25 6,20 6,00 8,30 7,90 0,15 NOM Gage Plane 1 0,25 24 0°– 8° A 0,75 0,50 Seating Plane 0,15 0,05 1,20 MAX PINS ** 0,10 48 56 64 A MAX 12,60 14,10 17,10 A MIN 12,40 13,90 16,90 DIM 4040078 / F 12/97 NOTES: A. B. C. D. All linear dimensions are in millimeters. This drawing is subject to change without notice.
PAGE 18
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.