Datasheet

ManualsBrandsTEXAS INSTRUMENTS ManualsInterface ICsInterface IC - multiplexers, demultiplexers VQFN 36

FEATURES

SEL

1LED

LED

GND

LED

0LED

LED

APPLICATIONS

DESCRIPTION/ORDERING INFORMATION

TS3L4892

16-BIT TO 8-BIT SPDT GIGABIT LAN SWITCH

WITH LED SWITCH

SCDS251 – MARCH 2008

www.ti.com

RHH PACKAGE

• Wide Bandwidth (BW = 1100 MHz Typ)

(TOP VIEW)

• Low Crosstalk (X

TALK

= – 37 dB Typ)

• Low Bit-to-Bit Skew (t

sk(o)

= 100 ps Max)

• Low and Flat ON-State Resistance

= 4 Ω Typ, r

ON(flat)

= 0.5 Ω Typ)

• Low Input/Output Capacitance

= 8 pF Typ)

• Rail-to-Rail Switching on Data I/O Ports

(0 to 5 V)

• V

Operating Range From 3 V to 3.6 V

• Latch-Up Performance Exceeds 100 mA Per

JESD 78, Class II

• ESD Performance Tested Per JESD 22

– 2000-V Human-Body Model

(A114-B, Class II)

PIN DESCRIPTION

– 1000-V Charged-Device Model (C101)

NAME DESCRIPTION

Data I/O

• 10/100/1000 Base-T Signal Switching

SEL Select input

• Differential (LVDS, LVPECL) Signal Switching

LED

LED I/O port

• Audio/Video Switching

XLED

LED I/O port

• Hub and Router Signal Switching

The TS3L4892 is a 16-bit to 8-bit multiplexer/demultiplexer LAN switch with a single select (SEL) input. SEL

controls the data path of the multiplexer/demultiplexer. The device provides additional I/Os for switching status

indicating LED signals.

The device provides a low and flat ON-state resistance (r

) and an excellent ON-state resistance match. Low

input/output capacitance, high bandwidth, low skew, and low crosstalk among channels make this device suitable

for various LAN applications, such as 10/100/1000 Base-T.

This device can be used to replace mechanical relays in LAN applications. It also can be used to route signals

from a 10/100 Base-T ethernet transceiver to the RJ-45 LAN connectors in laptops or in docking stations.

ORDERING INFORMATION

PACKAGE

(1) (2)

ORDERABLE PART NUMBER TOP-SIDE MARKING

– 40 ° C to 85 ° C QFN – RHH Tape and reel TS3L4892RHHR TK4892

(1) Package drawings, standard packing quantities, and symbolization are available at www.ti.com/packaging .

(2) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI

website at www.ti.com .

FUNCTION TABLE

INPUT INPUT/OUTPUT

FUNCTION

SEL A

L nB

= nB

, LED

= XLED

H nB

= nB

, LED

= XLED

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of

Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

PRODUCTION DATA information is current as of publication date.

Products conform to specifications per the terms of the Texas

Instruments standard warranty. Production processing does not

necessarily include testing of all parameters.

Summary of content (16 pages)

PAGE 1
TS3L4892 16-BIT TO 8-BIT SPDT GIGABIT LAN SWITCH WITH LED SWITCH www.ti.
PAGE 2
TS3L4892 16-BIT TO 8-BIT SPDT GIGABIT LAN SWITCH WITH LED SWITCH www.ti.
PAGE 3
TS3L4892 16-BIT TO 8-BIT SPDT GIGABIT LAN SWITCH WITH LED SWITCH www.ti.com SCDS251 – MARCH 2008 ABSOLUTE MAXIMUM RATINGS (1) over operating free-air temperature range (unless otherwise noted) MIN MAX VCC Supply voltage range –0.5 4.6 V VIN Control input voltage range (2) (3) –0.5 7 V (2) (3) (4) VI/O Switch I/O voltage range IIK Control input clamp current VIN < 0 –50 mA II/OK I/O port clamp current VI/O < 0 –50 mA ±128 mA II/O ON-state switch current –0.
PAGE 4
TS3L4892 16-BIT TO 8-BIT SPDT GIGABIT LAN SWITCH WITH LED SWITCH www.ti.com SCDS251 – MARCH 2008 ELECTRICAL CHARACTERISTICS for 1000 Base-T Ethernet switching over recommended operating free-air temperature range, VCC = 3.3 V ± 0.3 V (unless otherwise noted) TEST CONDITIONS (1) PARAMETER VIK SEL VCC = 3.6 V, IIN = –18 mA IIH SEL VCC = 3.6 V, IIL SEL ICC MIN TYP (2) MAX –0.7 UNIT –1.2 V VIN = VCC ±1 µA VCC = 3.6 V, VIN = GND ±1 µA 250 500 µA 2 2.5 pF 2.5 4 pF VCC = 3.
PAGE 5
TS3L4892 16-BIT TO 8-BIT SPDT GIGABIT LAN SWITCH WITH LED SWITCH www.ti.com SCDS251 – MARCH 2008 SWITCHING CHARACTERISTICS over recommended operating free-air temperature range, VCC = 3.3 V ± 0.3 V, RL = 200 Ω, CL = 10 pF (unless otherwise noted) (see Figures 4 and 5) FROM (INPUT) TO (OUTPUT) A or B B or A SEL A or B 0.5 tPHZ, tPLZ SEL A or B 0.
PAGE 6
TS3L4892 16-BIT TO 8-BIT SPDT GIGABIT LAN SWITCH WITH LED SWITCH www.ti.com SCDS251 – MARCH 2008 OPERATING CHARACTERISTICS 0 0 −2 Attenuation (dB) −20 Gain (dB) −4 −6 −8 −40 −60 −80 −10 −12 0.1 1 10 100 1000 10,000 −100 0.1 1 Frequency (MHz) Figure 1. Gain vs Frequency Figure 2. OFF Isolation vs Frequency 5 −20 4 ron (W) Attenuation (dB) 10,000 6 0 −40 −60 −100 0.1 3 2 −80 1 0 1 10 100 Frequency (MHz) 1000 10,000 0 1 2 3 4 5 6 VCOM (V) Figure 3.
PAGE 7
TS3L4892 16-BIT TO 8-BIT SPDT GIGABIT LAN SWITCH WITH LED SWITCH www.ti.com SCDS251 – MARCH 2008 PARAMETER MEASUREMENT INFORMATION (Enable and Disable Times) VCC Input Generator VIN 50 Ω 50 Ω VG1 TEST CIRCUIT DUT 2 × VCC Input Generator VI S1 RL VO 50 Ω CL (see Note A) 50 Ω VG2 RL TEST VCC S1 RL VI CL V∆ tPLZ/tPZL 3.3 V ± 0.3 V 2 × VCC 200 Ω GND 10 pF 0.3 V tPHZ/tPZH 3.3 V ± 0.3 V GND 200 Ω VCC 10 pF 0.3 V VIN VO 2.5 V Output Control (VIN) 1.25 V 1.
PAGE 8
TS3L4892 16-BIT TO 8-BIT SPDT GIGABIT LAN SWITCH WITH LED SWITCH www.ti.com SCDS251 – MARCH 2008 PARAMETER MEASUREMENT INFORMATION (Skew) VCC Input Generator VIN 50 Ω 50 Ω VG1 TEST CIRCUIT DUT 2 × VCC Input Generator 50 Ω Open RL TEST VCC S1 RL Vin CL tsk(o) 3.3 V ± 0.3 V Open 200 Ω VCC or GND 10 pF tsk(p) 3.3 V ± 0.3 V Open 200 Ω VCC or GND 10 pF 3.5 V 2.5 V 1.
PAGE 9
TS3L4892 16-BIT TO 8-BIT SPDT GIGABIT LAN SWITCH WITH LED SWITCH www.ti.com SCDS251 – MARCH 2008 PARAMETER MEASUREMENT INFORMATION EXT TRIGGER BIAS VBIAS Network Analyzer (HP8753ES) P1 P2 VCC A0 SEL 0B1 DUT CL = 10 pF (see Note A) VSEL A. CL includes probe and jig capacitance. Figure 7. Test Circuit for Frequency Response (BW) Frequency response is measured at the output of the ON channel. For example, when VSEL = 0 and A0 is the input, the output is measured at 0B1.
PAGE 10
TS3L4892 16-BIT TO 8-BIT SPDT GIGABIT LAN SWITCH WITH LED SWITCH www.ti.com SCDS251 – MARCH 2008 PARAMETER MEASUREMENT INFORMATION (continued) EXT TRIGGER BIAS VBIAS Network Analyzer (HP8753ES) P1 P2 VCC A0 0B1 RL = 100 Ω A1 1B1 0B2 DUT A2 1B2 2B1 RL = 100 Ω A3 3B1 2B2 3B2 SEL VSEL A. CL includes probe and jig capacitance. B. A 50-Ω termination resistor is needed to match the loading of the network analyzer. Figure 8.
PAGE 11
TS3L4892 16-BIT TO 8-BIT SPDT GIGABIT LAN SWITCH WITH LED SWITCH www.ti.com SCDS251 – MARCH 2008 PARAMETER MEASUREMENT INFORMATION (continued) EXT TRIGGER BIAS VBIAS Network Analyzer (HP8753ES) P1 P2 VCC A0 0B1 RL = 100 Ω A1 1B1 DUT 0B2 1B2 SEL VSEL A. CL includes probe and jig capacitance. B. A 50-Ω termination resistor is needed to match the loading of the network analyzer. Figure 9. Test Circuit for Off Isolation (OIRR) OFF isolation is measured at the output of the OFF channel.
PAGE 12
PACKAGE OPTION ADDENDUM www.ti.com 20-May-2013 PACKAGING INFORMATION Orderable Device Status (1) TS3L4892RHHR ACTIVE Package Type Package Pins Package Drawing Qty VQFN RHH 36 2500 Eco Plan Lead/Ball Finish (2) Green (RoHS & no Sb/Br) MSL Peak Temp Op Temp (°C) Device Marking (3) CU NIPDAU Level-3-260C-168 HR (4/5) -40 to 85 TK4892 (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs.
PAGE 13
PAGE 14
PAGE 15
PAGE 16
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.