Datasheet

ManualsBrandsTEXAS INSTRUMENTS ManualsInterface ICsInterface IC - analogue switches DSBGA 6

YFP PACKAGE

1 2

(Laser Marking View)

(Bump View)

TS5A12301E

www.ti.com

SCES707B – AUGUST 2008– REVISED APRIL 2011

IEC LEVEL 4 ESD-PROTECTED 0.75-Ω SPDT ANALOG SWITCH

WITH 1.8-V COMPATIBLE INPUT LOGIC

Check for Samples: TS5A12301E

FEATURES

APPLICATIONS

• Low ON-State Resistance (0.75 Ω) • Cell Phones

• Low Charge Injection • PDAs

• Excellent ON-State Resistance Matching • Portable Instrumentation

• Isolation in Power-Down Mode, V

= 0 • MP3 Players

• Specified Break-Before-Make Switching • Portable Media Players

• 2.25-V to 5.5-V Power Supply (V

)

• 6-MΩ Input Pulldown Allows Control Input (IN)

to Be Unconnected

• 1.8-V Compatible Control Input Threshold

Indepedent of V

• Latch-Up Performance Exceeds 100 mA Per

JESD 78, Class II

• ESD Performance Tested Per JESD 22

– 3000-V Human-Body Model

Table 1. TERMINAL ASSIGNMENTS

(A114-B, Class II)

C V

– 1000-V Charged-Device Model (C101)

B COM GND

• ESD Performance COM Port to GND

A IN NO

– 8000-V Human-Body Model

2 1

(A114-B, Class II)

– ±8-kV Contact Discharge

(IEC 61000-4-2)

– ±15-kV Air-Gap Discharge

(IEC 61000-4-2)

DESCRIPTION/ORDERING INFORMATION

The TS5A12301E is a single-pole double-throw (SPDT) analog switch that is designed to operate from 2.25 V to

5.5 V. The device offers a low ON-state resistance with an excellent channel-to-channel ON-state resistance

matching, and the break-before-make feature to prevent signal distortion during the transferring of a signal from

one path to another.

The device has excellent total harmonic distortion (THD) performance and consumes very low power. These

features make this device suitable for portable audio applications. The control input (IN) pin can be connected to

low-voltage GPIOs, allowing it to be controlled by 1.8-V signals.

The TS5A12301E has ±15-kV Air-Gap Discharge and ±8-kV Contact Discharge ESD protection for the COM port

to GND, which make it compliant with the IEC Level 4 ESD standard (IEC 61000-4-2).

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas

Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

PRODUCTION DATA information is current as of publication date.

Products conform to specifications per the terms of the Texas

Instruments standard warranty. Production processing does not

necessarily include testing of all parameters.

Summary of content (23 pages)

PAGE 1
TS5A12301E SCES707B – AUGUST 2008 – REVISED APRIL 2011 www.ti.com IEC LEVEL 4 ESD-PROTECTED 0.75-Ω SPDT ANALOG SWITCH WITH 1.8-V COMPATIBLE INPUT LOGIC Check for Samples: TS5A12301E FEATURES APPLICATIONS • • • • • • • • • • • • 1 • • • • Low ON-State Resistance (0.75 Ω) Low Charge Injection Excellent ON-State Resistance Matching Isolation in Power-Down Mode, V + = 0 Specified Break-Before-Make Switching 2.25-V to 5.
PAGE 2
TS5A12301E SCES707B – AUGUST 2008 – REVISED APRIL 2011 www.ti.com Table 2. ORDERING INFORMATION (1) PACKAGE (2) TA –40°C to 85°C (1) (2) (3) ORDERABLE PART NUMBER WCSP (DSBGA) 0.4-mm Pitch – YFP (Pb-free) Tape and reel TS5A12301EYFPR TOP-SIDE MARKING (3) _ _ _ 3W_ For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI website at www.ti.com. Package drawings, thermal data, and symbolization are available at www.ti.
PAGE 3
TS5A12301E SCES707B – AUGUST 2008 – REVISED APRIL 2011 www.ti.
PAGE 4
TS5A12301E SCES707B – AUGUST 2008 – REVISED APRIL 2011 www.ti.com ELECTRICAL CHARACTERISTICS FOR 5-V SUPPLY (1) V+ = 4.5 V to 5.5 V, TA = –40°C to 85°C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS TA V+ MIN TYP MAX UNIT Analog Switch Analog signal range VCOM, VNO, VNO ON-state resistance ron VNO or VNC = 2.5 V, ICOM = –100 mA, See Figure 15 ON-state resistance match between channels Δron VNO or VNC = 2.
PAGE 5
TS5A12301E SCES707B – AUGUST 2008 – REVISED APRIL 2011 www.ti.com ELECTRICAL CHARACTERISTICS FOR 5-V SUPPLY(1) (continued) V+ = 4.5 V to 5.5 V, TA = –40°C to 85°C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS TA V+ MIN TYP MAX UNIT Dynamic Turn-on time tON VCOM = V+, RL = 50 Ω, CL= 35 pF, See Figure 19 25°C 5V Full 4.5 V Turn-off time tOFF VCOM = V+, RL = 50 Ω, CL = 35 pF, See Figure 19 25°C 5V Full 4.
PAGE 6
TS5A12301E SCES707B – AUGUST 2008 – REVISED APRIL 2011 www.ti.com ELECTRICAL CHARACTERISTICS FOR 3.3-V SUPPLY (1) V+ = 3 V to 3.
PAGE 7
TS5A12301E SCES707B – AUGUST 2008 – REVISED APRIL 2011 www.ti.com ELECTRICAL CHARACTERISTICS FOR 3.3-V SUPPLY(1) (continued) V+ = 3 V to 3.6 V, TA = –40°C to 85°C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS TA V+ MIN TYP MAX 72 175 UNIT Dynamic Turn-on time tON VCOM = V+, RL = 50 Ω, CL= 35 pF, See Figure 19 25°C 3.3 V Full 3V Turn-off time tOFF VCOM = V+, RL = 50 Ω, CL = 35 pF, See Figure 19 25°C 3.
PAGE 8
TS5A12301E SCES707B – AUGUST 2008 – REVISED APRIL 2011 www.ti.com ELECTRICAL CHARACTERISTICS FOR 2.5-V SUPPLY (1) V+ = 2.25 V to 2.75 V, TA = –40°C to 85°C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS TA V+ MIN TYP MAX UNIT Analog Switch Analog signal range VCOM, VNO ON-state resistance ron VNO or VNC = 1.8 V, ICOM = –100 mA, Switch ON, See Figure 15 ON-state resistance match between channels Δron VNO or VNC = 1.8 V, 0.
PAGE 9
TS5A12301E SCES707B – AUGUST 2008 – REVISED APRIL 2011 www.ti.com ELECTRICAL CHARACTERISTICS FOR 2.5-V SUPPLY(1) (continued) V+ = 2.25 V to 2.75 V, TA = –40°C to 85°C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS TA V+ 25°C 2.5 V Full 2.
PAGE 10
TS5A12301E SCES707B – AUGUST 2008 – REVISED APRIL 2011 www.ti.com TYPICAL PERFORMANCE 1.2 1.0 1.2 TA = 85°C 1.0 0.8 TA = 25°C ron (Ω) ron (Ω) 0.8 0.6 0.4 TA = 85°C 0.6 TA = 25°C 0.4 TA = –40°C TA = –40°C 0.2 0.2 0.0 0.0 1.1 2.3 VCOM (V) 3.4 0.0 0.0 4.5 Figure 2. ron vs VCOM (V+ = 2.25 V) 1.1 2.3 VCOM (V) 4.5 3.4 Figure 3. ron vs VCOM (V+ = 3 V) 1.2 1.0 ron (Ω) 0.8 0.6 0.4 0.2 0.0 0.0 TA = 85°C TA = 25°C TA = –40°C 1.1 2.3 VCOM (V) 3.4 4.5 (°C) Figure 4.
PAGE 11
TS5A12301E SCES707B – AUGUST 2008 – REVISED APRIL 2011 www.ti.com TYPICAL PERFORMANCE (continued) 200 185 180 tON (NO) 165 tON/tOFF (ns) 160 tON/tOFF (ns) 140 tOFF (NC) 120 100 80 tON (NC) 60 125 105 85 65 40 tOFF (NO) tON (NO) 45 tOFF (NO) 20 25 –40 0 0 1 2 3 4 5 –20 0 6 Figure 8. tON/tOFF vs Supply Voltage 0 10 –2 V+ = 5 V V+ = 3 V –20 –30 60 80 100 –4 Gain (dB) –10 40 Figure 9.
PAGE 12
TS5A12301E SCES707B – AUGUST 2008 – REVISED APRIL 2011 www.ti.com THD (%) TYPICAL PERFORMANCE (continued) 0.01 0.009 0.008 0.007 0.006 0.005 0.004 0.003 0.002 0.001 0 V+ = 2.5 V V+ = 3 V V+ = 5 V 10 100 1000 10000 100000 Frequency (Hz) Figure 14.
PAGE 13
TS5A12301E SCES707B – AUGUST 2008 – REVISED APRIL 2011 www.ti.com PARAMETER MEASUREMENT INFORMATION V+ VNO NO COM + VCOM Channel ON r on VI ICOM IN VCOM VNO I COM VI = V IH or V IL + GND Figure 15. ON-State Resistance (ron) V+ VNO NO COM + VCOM + VI OFF-State Leakage Current Channel OFF VI = V IH or V IL IN + GND Figure 16.
PAGE 14
TS5A12301E SCES707B – AUGUST 2008 – REVISED APRIL 2011 www.ti.com PARAMETER MEASUREMENT INFORMATION (continued) V+ VNO NO Capacitance Meter VBIAS = V+ or GND and COM COM VI IN VI = VIH or VIL Capacitance is measured at NO, COM, and IN inputs during ON and OFF conditions. VBIAS GND Figure 18.
PAGE 15
TS5A12301E SCES707B – AUGUST 2008 – REVISED APRIL 2011 www.ti.com PARAMETER MEASUREMENT INFORMATION (continued) V+ Logic Input (VI) VNC or V NO NC or NO VCOM V+ 50% 0 COM NC or NO CL(2) VI Switch Output (VCOM) RL IN 90% 90% tBBM Logic Input(1) VNC or V NO = V+/2 RL = 50 Ω CL = 35 pF GND A. All input pulses are supplied by generators having the following characteristics: PRR ≤ 10 MHz, ZO = 50 Ω, tr < 5 ns, tf < 5 ns. B. CL includes probe and jig capacitance. Figure 20.
PAGE 16
TS5A12301E SCES707B – AUGUST 2008 – REVISED APRIL 2011 www.ti.com PARAMETER MEASUREMENT INFORMATION (continued) V+ Network Analyzer 50 Ω VNO NO Channel OFF: NO to COM COM 50 Ω Source Signal VCOM VI = V IH or V IL Network Analyzer Setup 50 VI IN Source Power = 0 dBm (632-mV P-P at 50-Ω load) + GND DC Bias = 350 mV Figure 22.
PAGE 17
TS5A12301E SCES707B – AUGUST 2008 – REVISED APRIL 2011 www.ti.com PARAMETER MEASUREMENT INFORMATION (continued) V+ RGEN VGEN Logic Input (VI) VIH OFF ON OFF V IL NO COM + VCOM VCOM ∆VCOM CL(1) VI VGEN = 0 to V+ IN Logic Input(2) RGEN = 0 CL = 1 nF QC = CL X ∆VCOM VI = V IH or V IL GND A. All input pulses are supplied by generators having the following characteristics: PRR ≤ 10 MHz, ZO = 50 Ω, tr < 5 ns, tf < 5 ns. B. CL includes probe and jig capacitance. Figure 24.
PAGE 18
TS5A12301E SCES707B – AUGUST 2008 – REVISED APRIL 2011 www.ti.com REVISION HISTORY Changes from Revision A (December 2009) to Revision B • 18 Page Added Logic Diagram. ..........................................................................................................................................................
PAGE 19
PACKAGE OPTION ADDENDUM www.ti.com 20-May-2013 PACKAGING INFORMATION Orderable Device Status (1) TS5A12301EYFPR ACTIVE Package Type Package Pins Package Drawing Qty DSBGA YFP 6 3000 Eco Plan Lead/Ball Finish (2) Green (RoHS & no Sb/Br) MSL Peak Temp Op Temp (°C) Device Marking (3) SNAGCU Level-1-260C-UNLIM (4/5) -40 to 85 (3W2 ~ 3W7 ~ 3WN) (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs.
PAGE 20
PACKAGE MATERIALS INFORMATION www.ti.com 26-Jan-2013 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) TS5A12301EYFPR DSBGA YFP 6 3000 180.0 8.4 TS5A12301EYFPR DSBGA YFP 6 3000 178.0 9.2 Pack Materials-Page 1 B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant 0.89 1.29 0.62 4.0 8.0 Q1 0.89 1.29 0.62 4.0 8.
PAGE 21
PACKAGE MATERIALS INFORMATION www.ti.com 26-Jan-2013 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) TS5A12301EYFPR DSBGA YFP 6 3000 220.0 220.0 34.0 TS5A12301EYFPR DSBGA YFP 6 3000 220.0 220.0 35.
PAGE 22
D: Max = 1.19 mm, Min = 1.13 mm E: Max = 0.79 mm, Min = 0.
PAGE 23
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.