Datasheet

ManualsBrandsTEXAS INSTRUMENTS ManualsInterface ICsInterface IC - analogue switches SM 8



 W   

 

SCDS183A – JANUARY 2005 – REVISED APRIL 2006

Description

The TS5A2053 is a single-pole double-throw (SPDT)

analog switch that is designed to operate from 1.65 V

to 5.5 V. This device can handle both digital and analog

signals, and signals up to V

can be transmitted in either

direction.

Applications

D Cell Phones

D Portable Audio Video Equipment

D Battery-Powered Equipment

D Low-Voltage Data-Acquisition Systems

D Test Equipment

D Communication Circuits

SSOP OR VSSOP PACKAGE

(TOP VIEW)

COM

GND

Logic Control

YEP OR YZP PACKAGE

(BOTTOM VIEW)

COM

GND

Logic Control

FUNCTION TABLE

EN IN

NC TO COM,

COM TO NC

NO TO COM,

COM TO NO

L ON OFF

L H OFF ON

H X OFF OFF

Features

D Low ON-State Resistance (10 W)

D Control Inputs Are 5-V Tolerant

D Low Charge Injection

D Excellent ON-Resistance Matching

D Low Total Harmonic Distortion (THD)

D 1.65-V to 5.5-V Single-Supply Operation

D Latch-Up Performance Exceeds 100 mA Per

JESD 78, Class II

D ESD Performance Tested Per JESD 22

− 2000-V Human-Body Model

(A114-B, Class II)

− 1000-V Charged-Device Model (C101)

Summary of Characteristics

= 5 V and T

= 25 °C

Configuration

Single Pole

Double Throw

(SPDT)

Number of channels 1

ON-state resistance (r

) 7.5 Ω

ON-state resistance match (∆r

) 0.8 Ω

ON-state resistance flatness (r

on(flat)

) 1.7 Ω

Turn-on/turn-off time (t

OFF

) 6.8 ns/4.1 ns

Charge injection (Q

) 3 pC

Bandwidth (BW) 330 MHz

OFF isolation (O

ISO

) −64 dB at 10 MHz

Crosstalk (X

TALK

) −68 dB at 10 MHz

Total harmonic distortion (THD) 0.01%

Leakage current (I

COM(OFF)

) ±10 nA

Power-supply current (I

) 0.1 µA

Package options

8-pin DSBGA, SSOP, or

VSSOP

   ! "#$ !  %#&'" ($) (#"!

"  !%$""! %$ *$ $!  $+! !#$! !(( ,-)

(#" %"$!!. ($!  $"$!!'- "'#($ $!.  '' %$$!)

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments

semiconductor products and disclaimers thereto appears at the end of this data sheet.

www.ti.com

Summary of content (28 pages)

PAGE 1
W www.ti.com SCDS183A – JANUARY 2005 – REVISED APRIL 2006 Description Features The TS5A2053 is a single-pole double-throw (SPDT) analog switch that is designed to operate from 1.65 V to 5.5 V. This device can handle both digital and analog signals, and signals up to V+ can be transmitted in either direction.
PAGE 2
W www.ti.com SCDS183A – JANUARY 2005 – REVISED APRIL 2006 ORDERING INFORMATION PACKAGE(1) TA ORDERABLE PART NUMBER NanoStar − WCSP (DSBGA) 0.23-mm Large Bump − YEP −40°C to 85°C NanoFree − WCSP (DSBGA) 0.
PAGE 3
www.ti.com W SCDS183A – JANUARY 2005 – REVISED APRIL 2006 Electrical Characteristics for 5-V Supply(1) V+ = 4.5 V to 5.
PAGE 4
W www.ti.com SCDS183A – JANUARY 2005 – REVISED APRIL 2006 Electrical Characteristics for 5-V Supply(1) (continued) V+ = 4.5 V to 5.5 V, TA = −40°C to 85°C (unless otherwise noted) PARAMETER TEST CONDITIONS SYMBOL TA V+ MIN TYP MAX 3.8 5.3 6.8 UNIT Dynamic Turn-on time VCOM = 3 V, RL = 300 Ω, CL = 35 pF, See Figure 17 25°C 5V tON Full 4.5 V to 5.5 V Turn-off time VCOM = 3 V, RL = 300 Ω, CL = 35 pF, See Figure 17 25°C 5V 0.
PAGE 5
W www.ti.com SCDS183A – JANUARY 2005 – REVISED APRIL 2006 Electrical Characteristics for 3.3-V Supply(1) V+ = 3 V to 3.
PAGE 6
W www.ti.com SCDS183A – JANUARY 2005 – REVISED APRIL 2006 Electrical Characteristics for 3.3-V Supply(1) (continued) V+ = 3 V to 3.6 V, TA = −40°C to 85°C (unless otherwise noted) PARAMETER TEST CONDITIONS SYMBOL TA V+ MIN TYP MAX 5 6.4 7.9 UNIT Dynamic Turn-on time VCOM = 2 V, RL = 300 Ω, CL = 35 pF, See Figure 17 25°C 3.3 V tON Full 3 V to 3.6 V 4.5 Turn-off time VCOM = 2 V, RL = 300 Ω, CL = 35 pF, See Figure 17 25°C 3.3 V 1.
PAGE 7
www.ti.com W SCDS183A – JANUARY 2005 – REVISED APRIL 2006 Electrical Characteristics for 2.5-V Supply(1) V+ = 2.3 V to 2.
PAGE 8
W www.ti.com SCDS183A – JANUARY 2005 – REVISED APRIL 2006 Electrical Characteristics for 2.5-V Supply(1) (continued) V+ = 2.3 V to 2.7 V, TA = −40°C to 85°C (unless otherwise noted) PARAMETER TEST CONDITIONS SYMBOL TA V+ MIN TYP MAX 7.1 9.3 UNIT Dynamic Turn-on time VCOM = 1.5 V, RL = 300 Ω, CL = 35 pF, See Figure 17 25°C 2.5 V 5.9 tON Full 2.3 V to 2.7 V 5.1 Turn-off time VCOM = 1.5 V, RL = 300 Ω, CL = 35 pF, See Figure 17 25°C 2.
PAGE 9
www.ti.com W SCDS183A – JANUARY 2005 – REVISED APRIL 2006 Electrical Characteristics for 1.8-V Supply(1) V+ = 1.65 V to 1.
PAGE 10
W www.ti.com SCDS183A – JANUARY 2005 – REVISED APRIL 2006 Electrical Characteristics for 1.8-V Supply(1) (continued) V+ = 1.65 V to 1.95 V, TA = −40°C to 85°C (unless otherwise noted) PARAMETER TEST CONDITIONS SYMBOL TA V+ MIN TYP MAX 11.8 14.5 UNIT Dynamic Turn-on time VCOM = 1.3 V, RL = 300 Ω, CL = 35 pF, See Figure 17 25°C 1.8 V 10.2 tON Full 1.65 V to 1.95 V 8.4 Turn-off time VCOM = 1.
PAGE 11
W www.ti.com SCDS183A – JANUARY 2005 – REVISED APRIL 2006 100 90 80 70 60 50 40 30 20 10 0 0 Figure 1 TA = 25°C 25 TA = 25°C 20 NO > COM ron (W) ron (Ω) TYPICAL PERFORMANCE NO > COM 15 10 NC > COM 5 NC > COM 0 0.25 0.5 0.75 1 1.25 VCOM (V) 1.5 1.75 0.6 0.9 1.2 1.5 1.8 2.1 2.4 Figure 1B. ron vs VCOM (V+ = 2.3 V) 14 12 0.3 VCOM (V) Figure 1A. ron vs VCOM (V+ = 1.
PAGE 12
W www.ti.com SCDS183A – JANUARY 2005 – REVISED APRIL 2006 TYPICAL PERFORMANCE (continued) 0.5 18 16 12 10 8 0.0 6 4 −0.5 −1.0 −1.5 −2.5 VCC = 5 V −3.0 2 −3.5 0 −40°C 25°C TA (5C) 0 85°C Figure 4. Leakage Current vs Temperature (V+ = 5.5 V) 6 12 5 tON/tOFF (ns) 10 8 tON 6 4 1 tOFF 0 1.65 6 tON 4 3 tOFF 2 0 2.3 2.95 3.6 4.25 4.9 5.55 −40°C 25°C Supply Voltage (V) Figure 7. tON and tOFF vs Temperature (V+ = 5 V) 3.
PAGE 13
W www.ti.com SCDS183A – JANUARY 2005 – REVISED APRIL 2006 0.05 −50 −60 −70 −80 −90 −100 0.1 THD + Noise (%) 0 −10 −20 −30 −40 0.04 0.03 3.3 V 0.02 0.01 5V 0 1 10 100 Frequency (MHz) Figure 10. OFF Isolation (V+ = 5 V) 100K 1000 1M 10M 100M 100M Frequency (MHz) Figure 11. Total Harmonic Distortion vs Frequency 7 6 5 ICC (nA) Gain (dB) TYPICAL PERFORMANCE (continued) ICCL 4 3 2 ICCH 1 0 −40°C 25°C TA (5C) 85°C Figure 12.
PAGE 14
W www.ti.
PAGE 15
W www.ti.
PAGE 16
W www.ti.com SCDS183A – JANUARY 2005 – REVISED APRIL 2006 PARAMETER MEASUREMENT INFORMATION V+ VNC NC COM + VCOM Channel ON VNO NO r on + IN or EN VI ICOM VCOM * VNO or VNC W I COM VI = VIH or VIL + GND Figure 13. ON-State Resistance (ron) V+ VNC NC COM + VNO NO VCOM + IN or EN OFF-State Leakage Current Channel OFF VI = VIH or VIL VI + GND Figure 14.
PAGE 17
W www.ti.com SCDS183A – JANUARY 2005 – REVISED APRIL 2006 V+ Capacitance Meter VNC NC VNO NO VBIAS = V+ or GND VI = VIH or VIL VCOM COM VBIAS Capacitance is measured at NC, NO, COM, EN and IN inputs during ON and OFF conditions. VI IN or EN GND Figure 16.
PAGE 18
W www.ti.com SCDS183A – JANUARY 2005 – REVISED APRIL 2006 V+ Network Analyzer Channel OFF: NC to COM 50 W VNC NC VI = V+ or GND COM Source Signal 50 W VCOM NO Network Analyzer Setup IN or EN Source Power = 0 dBm (632-mV P-P at 50-W load) VI 50 W + GND DC Bias = 350 mV Figure 19.
PAGE 19
www.ti.com W SCDS183A – JANUARY 2005 – REVISED APRIL 2006 VI = VIH or VIL RL = 600 Ω fSOURCE = 20 Hz to 20 kHz CL = 50 pF Channel ON: COM to NC VSOURCE = V+ P-P V+/2 V+ Audio Analyzer RL Source Signal 10 mF NC 10 mF COM 600 W 600 W NO IN or EN CL(1) VI + 600 W GND (1) CL includes probe and jig capacitance. Figure 22.
PAGE 20
PACKAGE OPTION ADDENDUM www.ti.
PAGE 21
PACKAGE OPTION ADDENDUM www.ti.com 18-Oct-2013 (6) Lead/Ball Finish - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead/Ball Finish values may wrap to two lines if the finish value exceeds the maximum column width. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided.
PAGE 22
PACKAGE MATERIALS INFORMATION www.ti.com 1-Nov-2013 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant TS5A2053DCUR US8 DCU 8 3000 180.0 9.0 2.05 3.3 1.0 4.0 8.0 Q3 TS5A2053DCURG4 US8 DCU 8 3000 180.0 8.4 2.25 3.35 1.05 4.0 8.
PAGE 23
PACKAGE MATERIALS INFORMATION www.ti.com 1-Nov-2013 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) TS5A2053DCUR US8 DCU 8 3000 182.0 182.0 20.0 TS5A2053DCURG4 US8 DCU 8 3000 202.0 201.0 28.
PAGE 24
MECHANICAL DATA MPDS049B – MAY 1999 – REVISED OCTOBER 2002 DCT (R-PDSO-G8) PLASTIC SMALL-OUTLINE PACKAGE 0,30 0,15 0,65 8 0,13 M 5 0,15 NOM ÇÇÇÇÇ ÇÇÇÇÇ ÇÇÇÇÇ ÇÇÇÇÇ 2,90 2,70 4,25 3,75 Gage Plane PIN 1 INDEX AREA 1 0,25 4 0° – 8° 3,15 2,75 0,60 0,20 1,30 MAX Seating Plane 0,10 0,10 0,00 NOTES: A. B. C. D. 4188781/C 09/02 All linear dimensions are in millimeters. This drawing is subject to change without notice.
PAGE 25
PAGE 26
PAGE 27
PAGE 28
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.