Datasheet

ManualsBrandsTEXAS INSTRUMENTS ManualsInterface ICsInterface IC - analogue switches SM 8

DCT OR DCU PACKAGE

(TOP VIEW)

NO1

COM1

IN2

GND

COM2

IN1

NO2

YZP PACKAGE

(BOTTOM VIEW)

GND

IN2

COM1

NO1

IN1

COM2

NO2

TS5A2066

www.ti.com

SCDS184D –JANUARY 2005–REVISED APRIL 2010

DUAL-CHANNEL 10-Ω SPST ANALOG SWITCH

Check for Samples: TS5A2066

FEATURES

APPLICATIONS

• Sample-and-Hold Circuits

• Low ON-State Resistance (10 Ω)

• Battery-Powered Equipment

• Control Inputs Are 5-V Tolerant

• Audio and Video Signal Routing

• Low Charge Injection

• Communication Circuits

• Excellent ON-State Resistance Matching

• Cell Phones

• Low Total Harmonic Distortion (THD)

• Low-Voltage Data-Acquisition Systems

• 1.65-V to 5.5-V Single-Supply Operation

• PDAs

• Latch-Up Performance Exceeds 100 mA Per

DESCRIPTION/ORDERING INFORMATION

JESD 78, Class II

The TS5A2066 is a dual single-pole single-throw

• ESD Performance Tested Per JESD 22

(SPST) analog switch that is designed to operate

– 2000-V Human-Body Model

from 1.65 V to 5.5 V. This device can handle both

(A114-B, Class II)

digital and analog signals, and signals up to V

can

be transmitted in either direction.

– 1000-V Charged-Device Model (C101)

Table 1. Summary of Characteristics

(1)

Dual Single Pole

Configuration Single Throw

(2 × SPST)

Number of channels 2

ON-state resistance (r

) 7.5 Ω

ON-state resistance match (Δr

) 0.4 Ω

ON-state resistance flatness (r

on(flat)

) 3.5 Ω

Turn-on/turn-off time (t

OFF

) 5.8 ns/3.6 ns

Charge injection (Q

) 1 pC

Bandwidth (BW) 400 MHz

OFF isolation (O

ISO

) –68 dB

Crosstalk (X

TALK

) –66 dB

Total harmonic distortion (THD) 0.01%

Leakage current (I

COM(OFF)

/(I

NC(OFF)

±50 nA

Power-supply current (I

) 0.1 mA

8-pin DSBGA, SSOP,

Package options

or VSSOP

(1) V

= 5 V and T

= 25°C

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas

Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

2NanoFree is a trademark of Texas Instruments.

PRODUCTION DATA information is current as of publication date.

Products conform to specifications per the terms of the Texas

Instruments standard warranty. Production processing does not

necessarily include testing of all parameters.

Summary of content (30 pages)

PAGE 1
TS5A2066 www.ti.com SCDS184D – JANUARY 2005 – REVISED APRIL 2010 DUAL-CHANNEL 10-Ω SPST ANALOG SWITCH Check for Samples: TS5A2066 APPLICATIONS FEATURES 1 • • • • • • • 2 • Low ON-State Resistance (10 Ω) Control Inputs Are 5-V Tolerant Low Charge Injection Excellent ON-State Resistance Matching Low Total Harmonic Distortion (THD) 1.65-V to 5.
PAGE 2
TS5A2066 SCDS184D – JANUARY 2005 – REVISED APRIL 2010 www.ti.com ORDERING INFORMATION (1) –40°C to 85°C (1) (2) (3) ORDERABLE PART NUMBER PACKAGE (2) TA TOP-SIDE MARKING (3) NanoFree™ – WCSP (DSBGA) 0.
PAGE 3
TS5A2066 www.ti.com SCDS184D – JANUARY 2005 – REVISED APRIL 2010 Electrical Characteristics for 5-V Supply (1) V+ = 4.5 V to 5.5 V, TA = –40°C to 85°C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS TA V+ MIN TYP MAX UNIT Analog Switch Analog signal range ON-state resistance VCOM, VNO ron 0 0 ≤ VNO ≤ V+, ICOM = –32 mA, Switch ON, See Figure 13 ON-state resistance match between channels Δron VNO = 3.
PAGE 4
TS5A2066 SCDS184D – JANUARY 2005 – REVISED APRIL 2010 www.ti.com Electrical Characteristics for 5-V Supply (1) (continued) V+ = 4.5 V to 5.5 V, TA = –40°C to 85°C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS TA V+ MIN TYP MAX 25°C 5V 4.4 5.2 5.8 Full 4.5 V to 5.5 V 3.4 25°C 5V 1.7 Full 4.5 V to 5.5 V 1.
PAGE 5
TS5A2066 www.ti.com SCDS184D – JANUARY 2005 – REVISED APRIL 2010 Electrical Characteristics for 3.3-V Supply (1) V+ = 3 V to 3.
PAGE 6
TS5A2066 SCDS184D – JANUARY 2005 – REVISED APRIL 2010 www.ti.com Electrical Characteristics for 3.3-V Supply (1) (continued) V+ = 3 V to 3.6 V, TA = –40°C to 85°C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS TA V+ MIN TYP MAX 25°C 3.3 V 4.9 5.6 6.4 Full 3 V to 3.6 V 4.3 25°C 3.3 V 2 Full 3 V to 3.6 V 1.
PAGE 7
TS5A2066 www.ti.com SCDS184D – JANUARY 2005 – REVISED APRIL 2010 Electrical Characteristics for 2.5-V Supply (1) V+ = 2.3 V to 2.
PAGE 8
TS5A2066 SCDS184D – JANUARY 2005 – REVISED APRIL 2010 www.ti.com Electrical Characteristics for 2.5-V Supply (1) (continued) V+ = 2.3 V to 2.7 V, TA = –40°C to 85°C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS TA V+ MIN TYP MAX 25°C 2.5 V 5.7 6.4 8.1 Full 2.3 V to 2.7 V 4.4 25°C 2.5 V 2.1 Full 2.3 V to 2.7 V 1.8 UNIT Dynamic Turn-on time tON VCOM = 1.5 V, RL = 300 Ω, CL = 35 pF, See Figure 17 Turn-off time tOFF VCOM = 1.
PAGE 9
TS5A2066 www.ti.com SCDS184D – JANUARY 2005 – REVISED APRIL 2010 Electrical Characteristics for 1.8-V Supply (1) V+ = 1.65 V to 1.95 V, TA = –40°C to 85°C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS TA V+ MIN TYP MAX UNIT Analog Switch Analog signal range ON-state resistance VCOM, VNO ron 0 0 ≤ VNO ≤ V+, ICOM = –4 mA, Switch ON, See Figure 13 ON-state resistance match between channels Δron VNO = 1.
PAGE 10
TS5A2066 SCDS184D – JANUARY 2005 – REVISED APRIL 2010 www.ti.com Electrical Characteristics for 1.8-V Supply (1) (continued) V+ = 1.65 V to 1.95 V, TA = –40°C to 85°C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS TA V+ MIN TYP MAX 25°C 1.8 V 9.3 10.4 11.5 Full 1.65 V to 1.95 V 6.8 25°C 1.8 V 3.3 Full 1.65 V to 1.95 V 2.4 UNIT Dynamic tON VCOM = 1.3 V, RL = 300 Ω, CL = 35 pF, See Figure 17 Turn-off time tOFF VCOM = 1.
PAGE 11
TS5A2066 www.ti.com SCDS184D – JANUARY 2005 – REVISED APRIL 2010 TYPICAL PERFORMANCE V+ = 1.65 V V+ = 2.3 V 90 25 TA = 25°C NO1 > COM1 80 70 TA = 25°C NO1 > COM1 Figure 1 20 15 50 ron (W) ron (Ω) 60 40 30 20 10 5 10 0 0 0 0.25 0.5 0.75 1 1.25 1.5 1.75 0 0.3 0.6 0.9 1.2 VCOM (V) V+ = 3 V 1.8 2.1 2.4 V+ = 4.5 V 10 14 TA = 25°C NO1 > COM1 12 9 TA = 25°C NO1 > COM1 8 10 7 8 ron (W) ron (W) 1.5 VCOM (V) 6 6 5 4 3 4 2 2 1 0 0 0 0.5 1 1.5 2 2.5 3 0 0.
PAGE 12
TS5A2066 SCDS184D – JANUARY 2005 – REVISED APRIL 2010 www.ti.com TYPICAL PERFORMANCE (continued) 10 TA = −40°C TA = 25°C TA = 85°C 9 8 ron (W) 7 6 5 4 3 2 1 0 0 0.5 1 1.5 2 2.5 3 VCOM (V) 3.5 4 4.5 Figure 3. ron vs VCOM (V+ = 4.5 V) 20 INO2(ON) 18 Leakage (nA) 16 INO2(OFF) 14 ICOM2(ON), ICOM2(OFF) 12 INO1(ON) 10 ICOM1(ON), ICOM1(OFF) 8 INO1(OFF) 6 4 2 0 −40°C 25°C TA (5C) 85°C QC Figure 4. Leakage Current vs Temperature 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0.0 −0.5 −1.0 3.
PAGE 13
TS5A2066 www.ti.com SCDS184D – JANUARY 2005 – REVISED APRIL 2010 TYPICAL PERFORMANCE (continued) 12 tON/tOFF (ns) 10 8 tON 6 4 tOFF 2 0 1.65 2.15 2.65 3.15 3.65 4.15 4.65 5.15 Supply Voltage (V) Figure 6. tON and tOFF vs V+ 6 tON 5 tON/tOFF (ns) 4 3 tOFF 2 1 0 −40°C 25°C 85°C TA (5C) Figure 7. tON and tOFF vs Temperature (V+ = 5 V) 3.5 TA = 25°C Logic Threshold (V) 3 2.5 2 VIH 1.5 1 VIL 0.5 0 1.6 2.1 2.6 3.1 3.6 4.1 V+ (V) 4.6 5.1 5.6 Figure 8.
PAGE 14
TS5A2066 SCDS184D – JANUARY 2005 – REVISED APRIL 2010 www.ti.com TYPICAL PERFORMANCE (continued) 5 0 Gain 0 –5 TA = 25°C Phase –2 –10 –15 –4 –20 –6 Phase (°) Gain (dB) −1 –25 –8 –30 –10 0.1 10 Frequency (MHz) 1 100 –35 1000 Figure 9. Bandwidth (V+ = 5 V) 0 –20 Gain (dB) –40 –60 Crosstalk –80 OFF Isolation –100 –120 0.1 1 10 100 1000 Frequency (MHz) Figure 10. OFF Isolation and Crosstalk (V+ = 5 V) 7 THD + Noise (%) 6 THD (3.3 V) 5 4 3 2 1 THD (5 V) 0 0.
PAGE 15
TS5A2066 www.ti.com SCDS184D – JANUARY 2005 – REVISED APRIL 2010 TYPICAL PERFORMANCE (continued) 70 ICC TYP (nA) 60 50 40 30 20 10 0 −40°C 25°C TA (5C) 85°C Figure 12.
PAGE 16
TS5A2066 SCDS184D – JANUARY 2005 – REVISED APRIL 2010 www.ti.com Table 2. PIN DESCRIPTION NO. NAME DESCRIPTION 1 NO1 2 COM1 Normally open 3 IN2 4 GND Digital ground 5 NO2 Normally open 6 COM2 7 IN1 Digital control to connect COM to NO 8 V+ Power supply Common Digital control to connect COM to NO Common Table 3.
PAGE 17
TS5A2066 www.ti.com SCDS184D – JANUARY 2005 – REVISED APRIL 2010 PARAMETER MEASUREMENT INFORMATION V+ VNO NO COM + VCOM Channel ON r on + VI ICOM IN VCOM * VNO W I COM VI = VIH or VIL + GND Figure 13. ON-State Resistance (ron) V+ VNO NO COM + VCOM + VI OFF-State Leakage Current Channel OFF VI = VIH or VIL IN + GND Figure 14. OFF-State Leakage Current (ICOM(OFF), INO(OFF)) V+ VNO NO COM + VI VCOM ON-State Leakage Current Channel ON VI = VIH or VIL IN + GND Figure 15.
PAGE 18
TS5A2066 SCDS184D – JANUARY 2005 – REVISED APRIL 2010 www.ti.com PARAMETER MEASUREMENT INFORMATION (continued) V+ VNO NO Capacitance Meter VBIAS = V+ or GND VI = VIH or VIL VCOM COM Capacitance is measured at NO, COM, and IN inputs during ON and OFF conditions. VBIAS VI IN GND Figure 16. Capacitance (CI, CCOM(OFF), CCOM(ON), CNO(OFF), CNO(ON)) (1) All input pulses are supplied by generators having the following characteristics: PRR ≤ 10 MHz, ZO = 50 Ω, tr < 5 ns, tf < 5 ns.
PAGE 19
TS5A2066 www.ti.com SCDS184D – JANUARY 2005 – REVISED APRIL 2010 PARAMETER MEASUREMENT INFORMATION (continued) V+ Network Analyzer 50 W VNO NO Channel ON: NO to COM VCOM COM VI = V+ or GND Source Signal Network Analyzer Setup VI 50 W IN Source Power = 0 dBm (632-mV P-P at 50-W load) + GND DC Bias = 350 mV Figure 18.
PAGE 20
TS5A2066 SCDS184D – JANUARY 2005 – REVISED APRIL 2010 www.ti.com PARAMETER MEASUREMENT INFORMATION (continued) V+ RGEN VGEN Logic Input (VI) VIH OFF ON OFF V IL NO COM + VCOM ∆VCOM VCOM CL(2) VI VGEN = 0 to V+ IN Logic Input(1) RGEN = 0 CL = 0.1 nF QC = CL × ∆VCOM VI = VIH or VIL GND Figure 21. Charge Injection (QC) (6) CL includes probe and jig capacitance.
PAGE 21
PACKAGE OPTION ADDENDUM www.ti.
PAGE 22
PACKAGE OPTION ADDENDUM www.ti.com 11-Apr-2013 Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties.
PAGE 23
PACKAGE MATERIALS INFORMATION www.ti.com 4-Jul-2012 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant TS5A2066DCUR US8 DCU 8 3000 180.0 8.4 2.25 3.35 1.05 4.0 8.0 Q3 TS5A2066YZPR DSBGA YZP 8 3000 180.0 8.4 1.02 2.02 0.63 4.0 8.0 Q1 TS5A2066YZPR DSBGA YZP 8 3000 178.0 9.2 1.02 2.02 0.63 4.0 8.
PAGE 24
PACKAGE MATERIALS INFORMATION www.ti.com 4-Jul-2012 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) TS5A2066DCUR US8 DCU 8 3000 202.0 201.0 28.0 TS5A2066YZPR DSBGA YZP 8 3000 220.0 220.0 34.0 TS5A2066YZPR DSBGA YZP 8 3000 220.0 220.0 35.
PAGE 25
MECHANICAL DATA MPDS049B – MAY 1999 – REVISED OCTOBER 2002 DCT (R-PDSO-G8) PLASTIC SMALL-OUTLINE PACKAGE 0,30 0,15 0,65 8 0,13 M 5 0,15 NOM ÇÇÇÇÇ ÇÇÇÇÇ ÇÇÇÇÇ ÇÇÇÇÇ 2,90 2,70 4,25 3,75 Gage Plane PIN 1 INDEX AREA 1 0,25 4 0° – 8° 3,15 2,75 0,60 0,20 1,30 MAX Seating Plane 0,10 0,10 0,00 NOTES: A. B. C. D. 4188781/C 09/02 All linear dimensions are in millimeters. This drawing is subject to change without notice.
PAGE 26
PAGE 27
PAGE 28
PAGE 29
D: Max = 1.918 mm, Min =1.858 mm E: Max = 0.918 mm, Min =0.
PAGE 30
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.