Datasheet

ManualsBrandsTEXAS INSTRUMENTS ManualsInterface ICsInterface IC - analogue switches UQFN 8

FEATURES

APPLICATIONS

NO1

IN2

COM1

GND

COM2

IN1

NO2

IN2

COM1

GND

COM2

NO1

IN1

NO2

DESCRIPTION

TS5A21366

www.ti.com

................................................................................................................................................. SCDS285A – MARCH 2009 – REVISED OCTOBER 2009

0.75- Ω DUAL SPST ANALOG SWITCH WITH 1.8-V COMPATIBLE INPUT LOGIC

• Dual Single-Pole Single-Throw (SPST) Switch • ESD Performance Tested Per JESD 22

• 1.65-V to 5.5-V Power Supply (V

) – 2000-V Human-Body Model

(A114-B, Class II)

• Isolation in Powerdown Mode, V

= 0

– 1000-V Charged-Device Model (C101)

• Low ON-State Resistance (0.75 Ω Typ)

• Excellent ON-State Resistance Matching

• Cell Phones

• Low Charge Injection

• PDAs

• Low Total Harmonic Distortion (THD)

• Portable Instrumentation

• High Bandwidth (260 MHz)

• Audio and Video Signal Routing

• 1.8-V Compatible Control Input

• Portable Media Players

Threshold Independent of V

• Communication Circuits

• Latch-Up Performance Exceeds 100 mA Per

• Computer Peripherals

JESD 78, Class II

DCU PACKAGE RSE PACKAGE

(TOP VIEW) (TOP VIEW)

The TS5A21366 is a dual single-pole single-throw (SPST) analog switch that is designed to operate from 1.65 V

to 5.5 V. The device offers a low ON-state resistance and an excellent channel-to-channel ON-state resistance

matching. The device has excellent total harmonic distortion (THD) performance and consumes very low power.

The control pin can be connected to a low voltage GPIO allowing it to be controlled by 1.8-V signals.

These features make this device ideal for portable audio applications.

The TS5A21366 is available in a small, space-saving 8-pin DCU or RSE package and is characterized for

operation over the free-air temperature range of – 40 ° C to 85 ° C.

ORDERING INFORMATION

(1)

PACKAGE

(2)

ORDERABLE PART NUMBER TOP-SIDE MARKING

VSSOP – DCU Tape and reel TS5A21366DCUR JBS_

– 40 ° C to 85 ° C

QFN – RSE Tape and reel TS5A21366RSER 4F

(1) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI

web site at www.ti.com .

(2) Package drawings, thermal data, and symbolization are available at www.ti.com/packaging .

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas

Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

PRODUCTION DATA information is current as of publication date.

Products conform to specifications per the terms of the Texas

Instruments standard warranty. Production processing does not

necessarily include testing of all parameters.

Summary of content (29 pages)

PAGE 1
TS5A21366 www.ti.com................................................................................................................................................. SCDS285A – MARCH 2009 – REVISED OCTOBER 2009 0.75-Ω DUAL SPST ANALOG SWITCH WITH 1.8-V COMPATIBLE INPUT LOGIC FEATURES 1 • • • • • • • • • • Dual Single-Pole Single-Throw (SPST) Switch 1.65-V to 5.5-V Power Supply (V+) Isolation in Powerdown Mode, V+ = 0 Low ON-State Resistance (0.
PAGE 2
TS5A21366 SCDS285A – MARCH 2009 – REVISED OCTOBER 2009................................................................................................................................................. www.ti.com SUMMARY OF CHARACTERISTICS (1) Configuration Single-pole, single-throw (SPST) Number of channels 2 ON-state resistance (rON) 0.75 Ω ON-state resistance match (ΔrON) 0.04 Ω 0.
PAGE 3
TS5A21366 www.ti.com................................................................................................................................................. SCDS285A – MARCH 2009 – REVISED OCTOBER 2009 ABSOLUTE MAXIMUM RATINGS (1) (2) over operating free-air temperature range (unless otherwise noted) MIN MAX V+ Supply voltage range (3) –0.5 6.5 V VNO VCOM Analog voltage range (3) (4) (5) –0.5 V+ + 0.
PAGE 4
TS5A21366 SCDS285A – MARCH 2009 – REVISED OCTOBER 2009................................................................................................................................................. www.ti.com ELECTRICAL CHARACTERISTICS FOR 5-V SUPPLY (1) V+ = 4.5 V to 5.5 V, TA = –40°C to 85°C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS TA V+ MIN TYP MAX UNIT Analog Switch Analog signal range VCOM, VNO ON-state resistance ron VNO = 2.
PAGE 5
TS5A21366 www.ti.com................................................................................................................................................. SCDS285A – MARCH 2009 – REVISED OCTOBER 2009 ELECTRICAL CHARACTERISTICS FOR 5-V SUPPLY (continued) V+ = 4.5 V to 5.5 V, TA = –40°C to 85°C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS TA V+ MIN TYP MAX 25°C 5V 39 49 72 Full 4.5 V to 5.5 V 28 25°C 5V 168 Full 4.5 V 5.
PAGE 6
TS5A21366 SCDS285A – MARCH 2009 – REVISED OCTOBER 2009................................................................................................................................................. www.ti.com ELECTRICAL CHARACTERISTICS FOR 3.3-V SUPPLY (1) V+ = 3 V to 3.
PAGE 7
TS5A21366 www.ti.com................................................................................................................................................. SCDS285A – MARCH 2009 – REVISED OCTOBER 2009 ELECTRICAL CHARACTERISTICS FOR 3.3-V SUPPLY (continued) V+ = 3 V to 3.6 V, TA = –40°C to 85°C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS TA V+ MIN TYP MAX 25°C 3.3 V 66 83 133 Full 3 V to 3.6 V 43 25°C 3.3 V 138 Full 3 V to 3.
PAGE 8
TS5A21366 SCDS285A – MARCH 2009 – REVISED OCTOBER 2009................................................................................................................................................. www.ti.com ELECTRICAL CHARACTERISTICS FOR 2.5-V SUPPLY (1) V+ = 2.3 V to 2.
PAGE 9
TS5A21366 www.ti.com................................................................................................................................................. SCDS285A – MARCH 2009 – REVISED OCTOBER 2009 ELECTRICAL CHARACTERISTICS FOR 2.5-V SUPPLY (continued) V+ = 2.3 V to 2.7 V, TA = –40°C to 85°C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS TA V+ MIN TYP MAX 25°C 2.5 V 101 137 222 Full 2.3 V to 2.7 V 68 25°C 2.5 V 148 Full 2.3 V to 2.
PAGE 10
TS5A21366 SCDS285A – MARCH 2009 – REVISED OCTOBER 2009................................................................................................................................................. www.ti.com ELECTRICAL CHARACTERISTICS FOR 1.8-V SUPPLY (1) V+ = 1.65 V to 1.
PAGE 11
TS5A21366 www.ti.com................................................................................................................................................. SCDS285A – MARCH 2009 – REVISED OCTOBER 2009 ELECTRICAL CHARACTERISTICS FOR 1.8-V SUPPLY (continued) V+ = 1.65 V to 1.95 V, TA = –40°C to 85°C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS TA V+ MIN TYP MAX 25°C 1.8 V 198 297 448 Full 1.65 V to 1.95 V 136 25°C 1.8 V 225 Full 1.65 V to 1.
PAGE 12
TS5A21366 SCDS285A – MARCH 2009 – REVISED OCTOBER 2009................................................................................................................................................. www.ti.
PAGE 13
TS5A21366 www.ti.com................................................................................................................................................. SCDS285A – MARCH 2009 – REVISED OCTOBER 2009 TYPICAL PERFORMANCE 0.8 2.5 V+ = 5 V 0.7 V+ = 3.3 V 2.0 V+ = 2.5 V 0.6 V+ = 1.8 V 0.5 rON (Ω) rON (Ω) 1.5 1.0 0.4 0.3 0.2 85°C 0.5 25°C 0.1 0.0 –40°C 0.0 0 1 2 3 VCOM (V) 4 5 0 6 1 Figure 1. ron vs VCOM 2 3 VCOM (V) 4 5 6 Figure 2. ron vs VCOM (V+ = 5 V) 8 1.
PAGE 14
TS5A21366 SCDS285A – MARCH 2009 – REVISED OCTOBER 2009................................................................................................................................................. www.ti.com TYPICAL PERFORMANCE (continued) 50 340 tOFF tON -50 240 tON/tOFF (ns) Leakage Current (nA) 0 –100 140 –150 ICOM(OFF) ICOM(ON) –200 INO(OFF) INO(ON) –250 –40 25 Temperature, TA (°C) 40 85 1.8 2.5 3.3 5.0 V+ (V) Figure 5. Leakage Current vs Temperature (V+ = 5.5 V) Figure 6.
PAGE 15
TS5A21366 www.ti.com................................................................................................................................................. SCDS285A – MARCH 2009 – REVISED OCTOBER 2009 TYPICAL PERFORMANCE (continued) 0 –5 –1 –15 –2 –25 Magnitude (dB) Magnitude (dB) –3 –4 –5 –35 –45 –6 –55 5V –7 3.3 V 2.5 V –8 –9 100000 5V 3.3 V 2.5 V –65 1.8 V 1.8 V 1000000 10000000 Frequency (Hz) 100000000 1000000000 –75 100000 1000000 Figure 9.
PAGE 16
TS5A21366 SCDS285A – MARCH 2009 – REVISED OCTOBER 2009................................................................................................................................................. www.ti.com TYPICAL PERFORMANCE (continued) –30 0.05 –40 0.04 Magnitude (dB) THD + N (%) –50 0.03 5V 3.3 V 2.5 V 0.02 –60 –70 1.8 V –90 5V 3.3 V 0.01 2.5 V –80 1.8 V 0.00 10 100 1000 Frequency (Hz) 10000 Figure 13.
PAGE 17
TS5A21366 www.ti.com................................................................................................................................................. SCDS285A – MARCH 2009 – REVISED OCTOBER 2009 PARAMETER MEASUREMENT INFORMATION V+ VNO NO COM + VCOM Channel ON rON = VI ICOM IN VCOM – VNO Ω ICOM VI = V IH or V IL + GND Figure 15. ON-State Resistance (ron) V+ VNO NO COM + VCOM + VI OFF-State Leakage Current Channel OFF VI = V IH or V IL IN + GND Figure 16.
PAGE 18
TS5A21366 SCDS285A – MARCH 2009 – REVISED OCTOBER 2009................................................................................................................................................. www.ti.com PARAMETER MEASUREMENT INFORMATION (continued) V+ VNO NO Capacitance Meter VBIAS = V+ or GND COM COM VI IN VI = V+ or GND Capacitance is measured at NO, COM, and IN inputs during ON and OFF conditions. VBIAS GND Figure 18.
PAGE 19
TS5A21366 www.ti.com................................................................................................................................................. SCDS285A – MARCH 2009 – REVISED OCTOBER 2009 PARAMETER MEASUREMENT INFORMATION (continued) V+ Network Analyzer 50 Ω VNO NO Channel ON: NO to COM VCOM COM Source Signal VI = V IH or V IL Network Analyzer Setup VI 50 Ω IN Source Power = 0 dBm (632-mV P-P at 50-Ωload) + GND DC Bias = 350 mV Figure 20.
PAGE 20
TS5A21366 SCDS285A – MARCH 2009 – REVISED OCTOBER 2009................................................................................................................................................. www.ti.com PARAMETER MEASUREMENT INFORMATION (continued) V+ RGEN VGEN Logic Input (VI) VIH OFF ON OFF V IL NO COM + VCOM VCOM ∆VCOM CL(A) VI VGEN = 0 to V+ IN Logic Input(B) RGEN = 0 CL = 1 nF QC = CL × ∆VCOM VI = V IH or V IL GND A. CL includes probe and jig capacitance. B.
PAGE 21
TS5A21366 www.ti.com................................................................................................................................................. SCDS285A – MARCH 2009 – REVISED OCTOBER 2009 PARAMETER MEASUREMENT INFORMATION (continued) VNO AC Ripple HPA4194A – 1 kΩ + 100 µF V+ NO COM 50 Ω Reference VI Test IN + GND Figure 25.
PAGE 22
TS5A21366 SCDS285A – MARCH 2009 – REVISED OCTOBER 2009................................................................................................................................................. www.ti.com APPLICATION INFORMATION Independent of V+, low-voltage GPIO-compatible control inputs TS5A21366 integrates special control inputs with low threshold allowing the device to be controlled by 1.8-V signals. The thresholds are fixed and independent of the supply value (V+).
PAGE 23
PACKAGE MATERIALS INFORMATION www.ti.com 14-Mar-2013 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant TS5A21366DCUR US8 DCU 8 3000 180.0 9.0 2.05 3.3 1.0 4.0 8.0 Q3 TS5A21366DCUR US8 DCU 8 3000 180.0 8.4 2.25 3.35 1.05 4.0 8.0 Q3 TS5A21366DCURG4 US8 DCU 8 3000 180.0 8.4 2.25 3.35 1.05 4.0 8.
PAGE 24
PACKAGE MATERIALS INFORMATION www.ti.com 14-Mar-2013 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) TS5A21366DCUR US8 DCU 8 3000 182.0 182.0 20.0 TS5A21366DCUR US8 DCU 8 3000 202.0 201.0 28.0 TS5A21366DCURG4 US8 DCU 8 3000 202.0 201.0 28.0 TS5A21366RSER UQFN RSE 8 3000 202.0 201.0 28.
PAGE 25
PAGE 26
PAGE 27
PAGE 28
PAGE 29
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.