Datasheet

ManualsBrandsTEXAS INSTRUMENTS ManualsInterface ICsInterface IC - analogue switches DSBGA 12

YFC PACKAGE

1 2

Bump View

Laser Marking View

TS5A22366

www.ti.com

SCDS262B –JANUARY 2009–REVISED MAY 2013

0.7-Ω DUAL SPDT ANALOG SWITCH

WITH NEGATIVE RAIL CAPABILITY AND 1.8-V COMPATIBLE INPUT LOGIC

Check for Samples: TS5A22366

FEATURES

• Negative Signaling Capability: Maximum • ESD Performance Tested Per JESD 22

Swing From –2.75 V to 2.75 V (V

= 2.75 V)

– 2500-V Human-Body Model

• Low ON-State Resistance (0.7 Ω Typ) (A114-B, Class II)

• Excellent ON-State Resistance Matching – 1000-V Charged-Device Model (C101)

• 1.8-V Compatible Control Input Threshold – 200-V Machine Model (A115-A)

Independent of V

APPLICATIONS

• Control Inputs Are 5.5-V Tolerant

• Cell Phones

• 2.25-V to 5.5-V Power Supply (V

)

• PDAs

• Low Charge Injection

• Portable Instrumentation

• Specified Break-Before-Make Switching

• Audio Routing

• Latch-Up Performance Exceeds 100 mA Per

JESD 78, Class II

• Portable Media Players

YFC PACKAGE TERMINAL ASSIGNMENTS

D NC1 V

NC2

C COM1 GND COM2

B NO1 GND NO2

A IN1 N.C.

(1)

IN2

1 2 3

(1) N.C. –No internal connection

DESCRIPTION

The TS5A22366 is a dual single-pole double-throw (SPDT) analog switch that is designed to operate from 2.25 V

to 5.5 V. The device features negative signal capability that allows signals below ground to pass through the

switch without distortion.

The break-before-make feature prevents signal distortion during the transferring of a signal from one path to

another. Low ON-state resistance, excellent channel-to-channel ON-state resistance matching, and minimal total

harmonic distortion (THD) performance are ideal for audio applications.

The TS5A22366 is available is a ultra small 1.6 mm × 1.2 mm wafer-chip-scale package (WCSP) (0.4 mm pitch).

ORDERING INFORMATION

For package and ordering information, see the Package Option Addendum at the end of this document.

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of

Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

PRODUCTION DATA information is current as of publication date.

Products conform to specifications per the terms of the Texas

Instruments standard warranty. Production processing does not

necessarily include testing of all parameters.

Summary of content (22 pages)

PAGE 1
TS5A22366 www.ti.com SCDS262B – JANUARY 2009 – REVISED MAY 2013 0.7-Ω DUAL SPDT ANALOG SWITCH WITH NEGATIVE RAIL CAPABILITY AND 1.8-V COMPATIBLE INPUT LOGIC Check for Samples: TS5A22366 FEATURES 1 • • • • • • • • • Negative Signaling Capability: Maximum Swing From –2.75 V to 2.75 V (V+ = 2.75 V) Low ON-State Resistance (0.7 Ω Typ) Excellent ON-State Resistance Matching 1.8-V Compatible Control Input Threshold Independent of V+ Control Inputs Are 5.5-V Tolerant 2.25-V to 5.
PAGE 2
TS5A22366 SCDS262B – JANUARY 2009 – REVISED MAY 2013 www.ti.com Table 1. SUMMARY OF CHARACTERISTICS V+ = 3.3 V, TA = 25°C 2:1 Multiplexer/Demultiplexer (2 × SPDT) Configuration Number of channels 2 ON-state resistance (ron) 0.8 Ω ON-state resistance match (Δron) 0.08 Ω ON-state resistance flatness (rON(flat)) 0.3 Ω Turn-on/turn-off time (tON/tOFF) 199 ns/182 ns Break-before-make time (tBBM) 7.
PAGE 3
TS5A22366 www.ti.com SCDS262B – JANUARY 2009 – REVISED MAY 2013 APPLICATION BLOCK DIAGRAM OUT+ Audio Source 1 NC1 OUT– COM1 NO1 IN1 8 Ω Speaker TS5A22366 IN2 NC2 COM2 OUT+ Audio Source 2 OUT– Input Select NO2 Figure 1. TS5A22366 Application Block Diagram Negative Signaling Capacity The TS5A22366 dual SPDT switch features negative signal capability that allows signals below ground to pass through without distortion. These analog switches operate from a single +2.3-V to +5.5-V supply.
PAGE 4
TS5A22366 SCDS262B – JANUARY 2009 – REVISED MAY 2013 www.ti.
PAGE 5
TS5A22366 www.ti.com SCDS262B – JANUARY 2009 – REVISED MAY 2013 ELECTRICAL CHARACTERISTICS FOR 2.5-V SUPPLY (1) V+ = 2.25 V to 2.7 V, TA = –40°C to 85°C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS TA V+ MIN TYP MAX UNIT Analog Switch Analog signal range ON-state resistance ON-state resistance match between channels ON-state resistance flatness VCOM, VNO, VNC ron V+ – 5.5 VNC or VNO = V+, 1.5 V, Switch ON, V+ – 5.5 V See Figure 15 ICOM = –100 mA, 25°C Full 1 2.
PAGE 6
TS5A22366 SCDS262B – JANUARY 2009 – REVISED MAY 2013 www.ti.com ELECTRICAL CHARACTERISTICS FOR 2.5-V SUPPLY(1) (continued) V+ = 2.25 V to 2.7 V, TA = –40°C to 85°C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS TA V+ MIN TYP MAX 193 297 UNIT Dynamic 25°C 2.5 V Full 2.25 V to 2.7 V 350 25°C 2.5 V 266 Full 2.25 V to 2.7 V 320 CL = 35 pF, See Figure 20 25°C 2.
PAGE 7
TS5A22366 www.ti.com SCDS262B – JANUARY 2009 – REVISED MAY 2013 ELECTRICAL CHARACTERISTICS FOR 3.3-V SUPPLY (1) V+ = 3 V to 3.6 V, TA = –40°C to 85°C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS TA V+ MIN TYP MAX UNIT Analog Switch Analog signal range VCOM, VNO, VNC V+ – 5.5 ron VNC or VNO ≤ V+, 1.5 V, V+ – 5.5 V, ICOM = –100 mA, Switch ON, See Figure 15 Δron VNC or VNO = 1.5 V, ICOM = –100 mA, Switch ON, See Figure 15 ron(flat) VNC or VNO ≤ V+, 1.5 V, V+ – 5.
PAGE 8
TS5A22366 SCDS262B – JANUARY 2009 – REVISED MAY 2013 www.ti.com ELECTRICAL CHARACTERISTICS FOR 3.3-V SUPPLY(1) (continued) V+ = 3 V to 3.6 V, TA = –40°C to 85°C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS TA V+ MIN TYP MAX 199 313 UNIT Dynamic Turn-on time tON VCOM = V+, RL = 300 Ω, CL = 35 pF, See Figure 19 25°C 3.3 V Full 3 V to 3.6 V Turn-off time tOFF VCOM = V+, RL = 300 Ω, CL = 35 pF, See Figure 19 25°C 3.3 V Full 3 V to 3.
PAGE 9
TS5A22366 www.ti.com SCDS262B – JANUARY 2009 – REVISED MAY 2013 ELECTRICAL CHARACTERISTICS FOR 5-V SUPPLY (1) V+ = 4.5 V to 5.5 V, TA = –40°C to 85°C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS TA V+ MIN TYP MAX UNIT Analog Switch Analog signal range ON-state resistance ON-state resistance match between channels ON-state resistance flatness VCOM, VNO, VNC V+ – 5.5 ron VNC or VNO = V+, 1.5V, V+ -5.5V ICOM = –100 mA, Switch ON, See Figure 15 Δron VNC or VNO = 1.
PAGE 10
TS5A22366 SCDS262B – JANUARY 2009 – REVISED MAY 2013 www.ti.com ELECTRICAL CHARACTERISTICS FOR 5-V SUPPLY(1) (continued) V+ = 4.5 V to 5.
PAGE 11
TS5A22366 www.ti.com SCDS262B – JANUARY 2009 – REVISED MAY 2013 TYPICAL PERFORMANCE 1.8 1.6 1.6 1.4 1.4 V+ = 2.25 V 1.0 rON (Ω) rON (Ω) 1.2 V+ = 3 V 0.8 0.6 0.4 1.0 TA = 25°C 0.8 0.6 TA = –40°C 0.4 V+ = 4.5 V 0.2 0.0 –4 TA = 85°C 1.2 0.2 –3 –2 0 –1 1 2 Input Voltage, VIN (V) 3 4 0.0 –3 5 –2 Figure 2. ron vs VIN 1.2 3 0.8 0.7 1.0 TA = 85°C TA = 25°C rON (Ω) 0.5 0.6 TA = –40°C 0.4 TA = 85°C 0.6 0.8 rON (Ω) –1 0 1 2 Input Voltage, VIN (V) Figure 3. ron vs VIN (V+ = 2.
PAGE 12
TS5A22366 SCDS262B – JANUARY 2009 – REVISED MAY 2013 www.ti.com TYPICAL PERFORMANCE (continued) 1 0 –1 –2 –3 –4 –5 –6 –7 –8 –9 –10 –11 –12 –13 0.01 470 455 440 tON Magnitude (dB) tON/tOFF (ns) 425 410 395 380 365 350 tOFF 335 320 2.5 3 VCC (V) 5 Figure 8. tON and tOFF vs Supply Voltage 0.1 1 10 100 Frequency (MHz) Figure 9. Bandwidth (V+ = 2.5 V) 1000 –11 –9 –21 –19 Magnitude (dB) Magnitude (dB) –1 –31 –41 –51 –29 –39 –49 –59 –61 –69 –71 –81 0.01 0.
PAGE 13
TS5A22366 www.ti.com SCDS262B – JANUARY 2009 – REVISED MAY 2013 TYPICAL PERFORMANCE (continued) 6 V+ = 5.5 V 5 V+ = 4.5 V VOUT (V) 4 V+ = 3.6 V V+ = 3 V V+ = 2.7 V V+ = 2.25 V 3 2 1 0 –1 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 VIN (V) Figure 14. Control Input Thresholds 1.8 2.
PAGE 14
TS5A22366 SCDS262B – JANUARY 2009 – REVISED MAY 2013 www.ti.com PARAMETER MEASUREMENT INFORMATION + Ω IN + Figure 15. ON-state Resistance (rON) + + OFF-State Leakage Current Channel OFF VI = VIH or VIL IN + Figure 16.
PAGE 15
TS5A22366 www.ti.com SCDS262B – JANUARY 2009 – REVISED MAY 2013 PARAMETER MEASUREMENT INFORMATION (continued) ON-State Leakage Current Channel ON VI = VIH or VIL + IN + Figure 17. ON-State Leakage Current (ICOM(ON), INC(ON)) VNO NO Capacitance Meter VBIAS = V+ or GND and VI = VIH or VIL VBIAS COM COM Capacitance is measured at NO, COM, and IN inputs during ON and OFF conditions. Figure 18. Capacitance (CI, CCOM(OFF), CCOM(ON), CNC(OFF), CNC(ON)) A.
PAGE 16
TS5A22366 SCDS262B – JANUARY 2009 – REVISED MAY 2013 www.ti.com PARAMETER MEASUREMENT INFORMATION (continued) TEST RL CL VCOM tON 300 Ω 35 pF V+ tOFF 300 Ω 35 pF V+ IN Logic Intput (VI) tON tOFF 90% Switch Output (VNO) 90% Figure 19. Turn-On (tON) and Turn-Off Time (tOFF) A. CL includes probe and jig capacitance. B. All input pulses are supplied by generators having the following characteristics: PRR ≤ 10 MHz, ZO = 50 Ω, tr < 5 ns, tf < 5 ns.
PAGE 17
TS5A22366 www.ti.com SCDS262B – JANUARY 2009 – REVISED MAY 2013 PARAMETER MEASUREMENT INFORMATION (continued) Channel ON: NO to COM VI = VIH or VIL 50 Ω Network Analyzer Setup Source Power = 0 dBM (632-mV P-P at 50-Ω load) DC Bias = 350 mV IN Ω + Figure 21. Bandwidth (BW) Channel OFF: NO to COM VI = VIH or VIL 50 Ω Ω Network Analyzer Setup Source Power = 0 dBM (632-mV P-P at 50-Ω load) DC Bias = 350 mV IN Ω + Figure 22.
PAGE 18
TS5A22366 SCDS262B – JANUARY 2009 – REVISED MAY 2013 www.ti.com PARAMETER MEASUREMENT INFORMATION (continued) Δ IN xΔ Figure 24. Charge Injection (QC) A. CL includes probe and jig capacitance. Channel ON: COM to NO VSOURCE = V+ P-P VI = VIH or VIL fSOURCE = 20 Hz to 20 kHz RL = 600 Ω CL = 50 pF V+/2 Audio Analyzer NO 600 Ω COM IN + 600 Ω –V+/2 Figure 25.
PAGE 19
TS5A22366 www.ti.com SCDS262B – JANUARY 2009 – REVISED MAY 2013 REVISION HISTORY Changes from Revision A (August 2009) to Revision B Page • Removed QFN reference from product description. ............................................................................................................. 1 • Changed Analog signal range MIN value from V+ – 0.5 to V+ – 5.5 .....................................................................................
PAGE 20
PACKAGE OPTION ADDENDUM www.ti.com 20-May-2013 PACKAGING INFORMATION Orderable Device Status (1) TS5A22366YFCR ACTIVE Package Type Package Pins Package Drawing Qty DSBGA YFC 12 3000 Eco Plan Lead/Ball Finish (2) Green (RoHS & no Sb/Br) MSL Peak Temp Op Temp (°C) Device Marking (3) SNAGCU Level-1-260C-UNLIM (4/5) -40 to 85 3A2 (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs.
PAGE 21
D: Max = 1.59 mm, Min = 1.53 mm E: Max = 1.19 mm, Min = 1.
PAGE 22
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.