Datasheet

ManualsBrandsTEXAS INSTRUMENTS ManualsInterface ICsInterface IC - analogue switches SOT 23 6

FEATURES

SOT-23 OR SC-70 PACKAGE

(TOP VIEW)

GND

COM

TS5A3157

YZP PACKAGE

(BOTTOM VIEW)

COM

GND

DESCRIPTION/ORDERING INFORMATION

APPLICATIONS

SUMMARY OF CHARACTERISTICS

(1)

TS5A3157

10- Ω SPDT ANALOG SWITCH

SCDS219A – NOVEMBER 2005 – REVISED OCTOBER 2007

www.ti.com

• Low ON-State Resistance (10 Ω )

• Control Inputs Are 5-V Tolerant

• Low Charge Injection

• Excellent ON-State Resistance Matching

• Low Total Harmonic Distortion (THD)

• 1.65-V to 5.5-V Single-Supply Operation

• Latch-Up Performance Exceeds 100 mA Per

JESD 78, Class II

• ESD Performance Tested Per JESD 22

– 2000-V Human-Body Model

(A114-B, Class II)

– 1000-V Charged-Device Model (C101)

The TS5A3157 is a single-pole double-throw (SPDT)

• Sample-and-Hold Circuits

analog switch that is designed to operate from 1.65 V

• Battery-Powered Equipment

to 5.5 V. This device can handle both digital and

• Audio and Video Signal Routing

analog signals, and signals up to V

can be

• Communication Circuits

transmitted in either direction.

Single Pole

Configuration Double Throw

(SPDT)

Number of channels 1

ON-state resistance (r

) 10 Ω

ON-state resistance match ( Δ r

) 0.15 Ω

ON-state resistance flatness (r

on(flat)

) 4 Ω

Turn-on/turn-off time (t

OFF

) 5.7 ns/3.8 ns

Break-before-make time (t

BBM

) 0.5 ns

Charge injection (Q

) 7 pC

Bandwidth (BW) 300 MHz

OFF isolation (O

ISO

) – 65 dB at 10 MHz

Crosstalk (X

TALK

) – 66 dB at 10 MHz

Total harmonic distortion (THD) 0.01%

Leakage current (I

NO(OFF)

NC(OFF)

) ± 0.1 μ A

Power-supply current (I

) 10 μ A

Package options 6-pin DSBGA, DBV, or DCK

(1) V

= 5 V and T

= 25 ° C

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of

Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

2 NanoFree is a trademark of Texas Instruments.

PRODUCTION DATA information is current as of publication date.

Products conform to specifications per the terms of the Texas

Instruments standard warranty. Production processing does not

necessarily include testing of all parameters.

Summary of content (28 pages)

PAGE 1
TS5A3157 10-Ω SPDT ANALOG SWITCH www.ti.com SCDS219A – NOVEMBER 2005 – REVISED OCTOBER 2007 FEATURES 1 • • • • • • • 2 • Low ON-State Resistance (10 Ω) Control Inputs Are 5-V Tolerant Low Charge Injection Excellent ON-State Resistance Matching Low Total Harmonic Distortion (THD) 1.65-V to 5.
PAGE 2
TS5A3157 10-Ω SPDT ANALOG SWITCH www.ti.com SCDS219A – NOVEMBER 2005 – REVISED OCTOBER 2007 ORDERING INFORMATION TA –40°C to 85°C (1) (2) PACKAGE (1) ORDERABLE PART NUMBER TOP-SIDE MARKING (2) NanoFree™ – WCSP (DSBGA) 0.
PAGE 3
TS5A3157 10-Ω SPDT ANALOG SWITCH www.ti.com SCDS219A – NOVEMBER 2005 – REVISED OCTOBER 2007 Electrical Characteristics for 5-V Supply (1) V+ = 4.5 V to 5.
PAGE 4
TS5A3157 10-Ω SPDT ANALOG SWITCH www.ti.com SCDS219A – NOVEMBER 2005 – REVISED OCTOBER 2007 Electrical Characteristics for 5-V Supply (1) (Continued) V+ = 4.5 V to 5.5 V, TA = –40°C to 85°C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS TA V+ MIN TYP MAX 25°C 5V 1 6 8.5 Full 4.5 V to 5.5 V 1 25°C 5V 1 Full 4.5 V to 5.
PAGE 5
TS5A3157 10-Ω SPDT ANALOG SWITCH www.ti.com SCDS219A – NOVEMBER 2005 – REVISED OCTOBER 2007 Electrical Characteristics for 3.3-V Supply (1) V+ = 3 V to 3.
PAGE 6
TS5A3157 10-Ω SPDT ANALOG SWITCH www.ti.com SCDS219A – NOVEMBER 2005 – REVISED OCTOBER 2007 Electrical Characteristics for 3.3-V Supply (1) (Continued) V+ = 3 V to 3.6 V, TA = –40°C to 85°C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS TA V+ MIN TYP MAX 25°C 3.3 V 3.5 7 9.5 Full 3 V to 3.6 V 1.5 25°C 3.3 V 1 Full 3 V to 3.6 V 1 25°C 3.3 V 2.5 Full 3 V to 3.
PAGE 7
TS5A3157 10-Ω SPDT ANALOG SWITCH www.ti.com SCDS219A – NOVEMBER 2005 – REVISED OCTOBER 2007 Electrical Characteristics for 2.5-V Supply (1) V+ = 2.3 V to 2.
PAGE 8
TS5A3157 10-Ω SPDT ANALOG SWITCH www.ti.com SCDS219A – NOVEMBER 2005 – REVISED OCTOBER 2007 Electrical Characteristics for 2.5-V Supply (1) (Continued) V+ = 2.3 V to 2.7 V, TA = –40°C to 85°C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS TA V+ MIN TYP MAX 25°C 2.5 V 5 8 13.5 Full 2.3 V to 2.7 V 25°C 2.5 V 1 Full 2.3 V to 2.7 V 1 UNIT Dynamic Turn-on time tON VCOM = 1.5 V, RL = 300 Ω, CL = 35 pF, See Figure 17 Turn-off time tOFF VCOM = 1.
PAGE 9
TS5A3157 10-Ω SPDT ANALOG SWITCH www.ti.com SCDS219A – NOVEMBER 2005 – REVISED OCTOBER 2007 Electrical Characteristics for 1.8-V Supply (1) V+ = 1.65 V to 1.
PAGE 10
TS5A3157 10-Ω SPDT ANALOG SWITCH www.ti.com SCDS219A – NOVEMBER 2005 – REVISED OCTOBER 2007 Electrical Characteristics for 1.8-V Supply (1)(Continued) V+ = 1.65 V to 1.95 V, TA = –40°C to 85°C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS TA V+ MIN TYP MAX 25°C 1.8 V 5 15 23 Full 1.65 V to 1.95 V 7 25°C 1.8 V 1 Full 1.65 V to 1.95 V 1 UNIT Dynamic Turn-on time tON VCOM = 1.3 V, RL = 300 Ω, CL = 35 pF, See Figure 17 Turn-off time tOFF VCOM = 1.
PAGE 11
TS5A3157 10-Ω SPDT ANALOG SWITCH www.ti.com SCDS219A – NOVEMBER 2005 – REVISED OCTOBER 2007 TYPICAL PERFORMANCE 140 16 120 14 12 100 V+ = 1.8 V 10 80 ron (W) ron (Ω) 855C 60 40 1 2 –405C 2 V+ = 5 V 0 0 255C 6 4 V+ = 2.5 V V+ = 3.3 V 20 8 3 4 5 0 0.0 0.3 0.6 0.9 1.2 1.5 1.8 2.1 2.4 2.7 3.0 VCOM (V) VCOM (V) Figure 1. ron vs VCOM Figure 2. ron vs VCOM (V+ = 3 V) 10 3.5 Leakage Current (nA) 855C 8 ron (W) 6 255C –405C 4 2 0 ICOM(ON) 2.5 INO(ON) 2.0 INC(OFF) 1.
PAGE 12
TS5A3157 10-Ω SPDT ANALOG SWITCH www.ti.com SCDS219A – NOVEMBER 2005 – REVISED OCTOBER 2007 TYPICAL PERFORMANCE 7 3.0 tON 6 VIL 5 2.0 4 3 I+ (µA) I+ (µA) VIH 2.5 tOFF 1.5 1.0 2 0.5 1 0.0 1.0 0 −40°C 25°C TA (5C) 85°C 1.8 2.6 4.2 5.0 5.8 TA (5C) Figure 7. tON and tOFF vs Temperature (V+ = 5 V) Figure 8. Logic-Level Threshold vs V+ 0.0 0 Crosstalk −0.5 −20 −1.0 −1.5 −40 −2.0 Gain (dB) Gain (dB) 3.4 −2.5 −3.0 −3.5 −4.0 −60 OFF Isolation −80 −100 −4.5 −5.
PAGE 13
TS5A3157 10-Ω SPDT ANALOG SWITCH www.ti.com SCDS219A – NOVEMBER 2005 – REVISED OCTOBER 2007 PIN DESCRIPTION PIN NO.
PAGE 14
TS5A3157 10-Ω SPDT ANALOG SWITCH www.ti.com SCDS219A – NOVEMBER 2005 – REVISED OCTOBER 2007 PARAMETER MEASUREMENT INFORMATION V+ VNC NC COM + VCOM Channel ON VNO NO r on + VI ICOM IN VCOM * VNO or VNC W I COM VI = VIH or VIL + GND Figure 13. ON-State Resistance (ron) V+ VNC NC COM + + VNO NO VI VCOM OFF-State Leakage Current Channel OFF VI = VIH or VIL IN + GND Figure 14.
PAGE 15
TS5A3157 10-Ω SPDT ANALOG SWITCH www.ti.com SCDS219A – NOVEMBER 2005 – REVISED OCTOBER 2007 V+ Capacitance Meter VNC NC VNO NO VBIAS = V+ or GND VI = VIH or VIL VCOM COM Capacitance is measured at NC, NO, COM, and IN inputs during ON and OFF conditions. VBIAS VI IN GND Figure 16.
PAGE 16
TS5A3157 10-Ω SPDT ANALOG SWITCH www.ti.com SCDS219A – NOVEMBER 2005 – REVISED OCTOBER 2007 V+ NC or NO V+ Logic Input (VI) VNC or VNO VCOM 50% 0 COM NC or NO CL(2) VI (2) 90% IN Logic Input(1) (1) Switch Output (VCOM) RL 90% tBBM VNC or VNO = V+/2 RL = 50 Ω CL = 35 pF GND All input pulses are supplied by generators having the following characteristics: PRR ≤ 10 MHz, ZO = 50 Ω, tr < 5 ns, tf < 5 ns. CL includes probe and jig capacitance. Figure 18.
PAGE 17
TS5A3157 10-Ω SPDT ANALOG SWITCH www.ti.com SCDS219A – NOVEMBER 2005 – REVISED OCTOBER 2007 V+ Network Analyzer Channel OFF: NC to COM 50 W VNC NC VI = V+ or GND COM Source Signal 50 W VCOM NO Network Analyzer Setup VI 50 W Source Power = 0 dBm (632-mV P-P at 50-W load) IN + GND DC Bias = 350 mV Figure 20.
PAGE 18
TS5A3157 10-Ω SPDT ANALOG SWITCH www.ti.com SCDS219A – NOVEMBER 2005 – REVISED OCTOBER 2007 V+ RGEN VGEN Logic Input (VI) OFF ON OFF V IL NC or NO COM + VIH VCOM ∆VCOM VCOM NC or NO CL(2) VI VGEN = 0 to V+ IN Logic Input(1) (1) (2) RGEN = 0 CL = 0.1 nF QC = CL × ∆VCOM VI = VIH or VIL GND All input pulses are supplied by generators having the following characteristics: PRR ≤ 10 MHz, ZO = 50 Ω, tr < 5 ns, tf < 5 ns. CL includes probe and jig capacitance. Figure 22.
PAGE 19
PACKAGE OPTION ADDENDUM www.ti.
PAGE 20
PACKAGE OPTION ADDENDUM www.ti.com 11-Apr-2013 Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties.
PAGE 21
PACKAGE MATERIALS INFORMATION www.ti.com 28-Oct-2012 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) TS5A3157DBVR SOT-23 DBV 6 3000 180.0 8.4 TS5A3157DCKR SC70 DCK 6 3000 178.0 TS5A3157DCKR SC70 DCK 6 3000 178.0 TS5A3157YZPR DSBGA YZP 6 3000 178.0 3.23 3.17 1.37 4.0 8.0 Q3 9.2 2.4 2.4 1.22 4.0 8.0 Q3 9.0 2.4 2.5 1.2 4.0 8.0 Q3 9.
PAGE 22
PACKAGE MATERIALS INFORMATION www.ti.com 28-Oct-2012 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) TS5A3157DBVR TS5A3157DCKR SOT-23 DBV 6 3000 202.0 201.0 28.0 SC70 DCK 6 3000 338.0 343.0 30.0 TS5A3157DCKR SC70 DCK 6 3000 180.0 180.0 18.0 TS5A3157YZPR DSBGA YZP 6 3000 220.0 220.0 35.
PAGE 23
PAGE 24
PAGE 25
PAGE 26
PAGE 27
D: Max = 1.418 mm, Min =1.358 mm E: Max = 0.918 mm, Min =0.
PAGE 28
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.