Datasheet

ManualsBrandsTEXAS INSTRUMENTS ManualsInterface ICsInterface IC - analogue switches SC 70 6

3 4

GND

COM

TS5A3160

www.ti.com

SCDS216C –OCTOBER 2005–REVISED MARCH 2012

1-Ω SPDT ANALOG SWITCH

5-V/3.3-V SINGLE-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER

Check for Samples: TS5A3160

FEATURES

– 1000-V Charged-Device Model (C101)

• Isolation in the Powered-Off Mode, V

= 0

APPLICATIONS

• Specified Make-Before-Break Switching

• Cell Phones

• Low ON-State Resistance (1 Ω)

• PDAs

• Control Inputs Are 5.5-V Tolerant

• Portable Instrumentation

• Low Charge Injection

• Audio and Video Signal Routing

• Excellent ON-State Resistance Matching

• Low-Voltage Data Acquisition Systems

• Low Total Harmonic Distortion (THD)

• Communication Circuits

• 1.65-V to 5.5-V Single-Supply Operation

• Modems

• Latch-Up Performance Exceeds 100 mA Per

• Hard Drives

JESD 78, Class II

• Computer Peripherals

• ESD Performance Tested Per JESD 22

• Wireless Terminals and Peripherals

– 2000-V Human-Body Model

(A114-B, Class II)

DBV OR DCK PACKAGE

(TOP VIEW)

DESCRIPTION/ORDERING INFORMATION

The TS5A3160 is a single-pole double-throw (SPDT) analog switch that is designed to operate from 1.65 V to

5.5 V. The device offers a low ON-state resistance and an excellent channel-to-channel ON-state resistance

matching. The device has excellent total harmonic distortion (THD) performance and consumes very low power.

These features make this device suitable for portable audio applications.

Table 1. ORDERING INFORMATION

PACKAGE

(1) (2)

ORDERABLE PART NUMBER TOP-SIDE MARKING

(3)

SOT (SOT-23) – DBV Tape and reel TS5A3160DBVR JAK_

–40°C to 85°C SOT (SC-70) – DCK

(3)

Tape and reel TS5A3160DCKR JK_

SOT (SC-70) – DCK Tape and reel TS5A3160DCKJ JK_

(1) Package drawings, thermal data, and symbolization are available at www.ti.com/packaging.

(2) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI

website at www.ti.com.

(3) DBV/DCK: The actual top-side marking has one additional character that designates the assembly/test site.

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of

Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

PRODUCTION DATA information is current as of publication date.

Products conform to specifications per the terms of the Texas

Instruments standard warranty. Production processing does not

necessarily include testing of all parameters.

Summary of content (30 pages)

PAGE 1
TS5A3160 www.ti.com SCDS216C – OCTOBER 2005 – REVISED MARCH 2012 1-Ω SPDT ANALOG SWITCH 5-V/3.3-V SINGLE-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER Check for Samples: TS5A3160 FEATURES – 1000-V Charged-Device Model (C101) 1 • • • • • • • • • Isolation in the Powered-Off Mode, V+ = 0 Specified Make-Before-Break Switching Low ON-State Resistance (1 Ω) Control Inputs Are 5.5-V Tolerant Low Charge Injection Excellent ON-State Resistance Matching Low Total Harmonic Distortion (THD) 1.65-V to 5.
PAGE 2
TS5A3160 SCDS216C – OCTOBER 2005 – REVISED MARCH 2012 www.ti.com Table 2. Summary of Characteristics (1) 2:1 Multiplexer/ Demultiplexer (1 × SPDT) Configuration Number of channels 1 ON-state resistance (ron) 1.1 Ω ON-state resistance match (Δron) 0.1 Ω 0.
PAGE 3
TS5A3160 www.ti.
PAGE 4
TS5A3160 SCDS216C – OCTOBER 2005 – REVISED MARCH 2012 www.ti.com ELECTRICAL CHARACTERISTICS FOR 5-V SUPPLY (1) V+ = 4.5 V to 5.5 V, TA = –40°C to 85°C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS TA V+ MIN TYP MAX UNIT Analog Switch Analog signal range VCOM, VNC, VNO 0 ≤ (VNO or VNC) ≤ V+, ICOM = –100 mA, Switch ON, See Figure 13 25°C ron VNO or VNC = 2.5 V, ICOM = –100 mA, Switch ON, See Figure 13 25°C Δron VNO or VNC = 2.
PAGE 5
TS5A3160 www.ti.com SCDS216C – OCTOBER 2005 – REVISED MARCH 2012 ELECTRICAL CHARACTERISTICS FOR 5-V SUPPLY(1) (continued) V+ = 4.5 V to 5.5 V, TA = –40°C to 85°C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS TA V+ MIN TYP MAX 25°C 5V 2 3.5 6 Full 4.5 V to 5.5 V 1 25°C 5V 3 Full 4.5 V to 5.5 V 2 25°C 5V 2 Full 5 V to 5.
PAGE 6
TS5A3160 SCDS216C – OCTOBER 2005 – REVISED MARCH 2012 www.ti.com ELECTRICAL CHARACTERISTICS FOR 3.3-V SUPPLY (1) V+ = 3 V to 3.
PAGE 7
TS5A3160 www.ti.com SCDS216C – OCTOBER 2005 – REVISED MARCH 2012 ELECTRICAL CHARACTERISTICS FOR 3.3-V SUPPLY(1) (continued) V+ = 3 V to 3.6 V, TA = –40°C to 85°C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS TA V+ MIN TYP MAX 4.5 13 UNIT Dynamic 25°C 3.3 V 2 Full 3 V to 3.6 V 1 25°C 3.3 V 3 Full 3 V to 3.6 V 2 25°C 3.3 V 1 Full 3 V to 3.6 V 1 CL = 1 nF, See Figure 22 25°C 3.
PAGE 8
TS5A3160 SCDS216C – OCTOBER 2005 – REVISED MARCH 2012 www.ti.com Electrical Characteristics for 2.5-V Supply (1) V+ = 2.3 V to 2.7 V, TA = –40°C to 85°C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS TA V+ MIN TYP MAX 0 V+ UNIT Analog Switch Analog signal range VCOM, VNC, VNO 0 ≤ (VNO or VNC) ≤ V+, ICOM = –8 mA, Switch ON, See Figure 13 25°C ron VNO or VNC = 1.8 V, ICOM = –8 mA, Switch ON, See Figure 13 25°C Δron VNO or VNC = 1.
PAGE 9
TS5A3160 www.ti.com SCDS216C – OCTOBER 2005 – REVISED MARCH 2012 Electrical Characteristics for 2.5-V Supply(1) (continued) V+ = 2.3 V to 2.7 V, TA = –40°C to 85°C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS TA V+ MIN TYP MAX UNIT Dynamic 25°C 2.5 V 2 Full 2.3 V to 2.7 V 1 25°C 2.5 V 3 Full 2.3 V to 2.7 V 2 25°C 2.5 V 1 Full 2.3 V to 2.7 V 1 CL = 1 nF, See Figure 22 25°C 2.
PAGE 10
TS5A3160 SCDS216C – OCTOBER 2005 – REVISED MARCH 2012 www.ti.com ELECTRICAL CHARACTERISTICS FOR 1.8-V SUPPLY (1) V+ = 1.65 V to 1.95 V, TA = –40°C to 85°C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS TA V+ MIN TYP MAX 0 V+ UNIT Analog Switch Analog signal range VCOM, VNC, VNO 0 ≤ (VNO or VNC) ≤ V+, ICOM = –2 mA, Switch ON, See Figure 13 25°C ron VNO or VNC = 1.5 V, ICOM = –2 mA, Switch ON, See Figure 13 25°C Δron VNO or VNC = 1.
PAGE 11
TS5A3160 www.ti.com SCDS216C – OCTOBER 2005 – REVISED MARCH 2012 ELECTRICAL CHARACTERISTICS FOR 1.8-V SUPPLY(1) (continued) V+ = 1.65 V to 1.95 V, TA = –40°C to 85°C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS TA V+ MIN TYP MAX UNIT Dynamic 25°C 1.8 V 6 Full 2.3 V to 2.7 V 5 25°C 1.8 V 6 Full 2.3 V to 2.7 V 5 25°C 1.8 V 2 Full 2.3 V to 2.7 V 2 CL = 1 nF, See Figure 22 25°C 1.8 V 5.
PAGE 12
TS5A3160 SCDS216C – OCTOBER 2005 – REVISED MARCH 2012 www.ti.com TYPICAL PERFORMANCE (continued) 1.0 20 COM(ON) Leakage Current (nA) 85°C 0.9 0.8 ron (Ω) 0.7 25°C 0.6 –40°C 0.5 0.4 0.3 0.2 10 0 NO/NC (off) −10 −20 −30 NO/NC (on) 0.1 −40 0.0 0 1 2 3 4 5 −40°C 6 25°C Figure 3. ron vs VCOM (V+ = 5 V) Figure 4. Leakage Current vs Temperature (V+ = 5.5 V) 40 3500 NC/NO (PWRoff) 3000 V+ = 5 V 30 V+ = 3.
PAGE 13
TS5A3160 www.ti.com SCDS216C – OCTOBER 2005 – REVISED MARCH 2012 TYPICAL PERFORMANCE (continued) 0 2.5 −4 VIH Gain (dB) Logic Level Threshold (nA) −2 2.0 1.5 VIL 1.0 −6 −8 −10 0.5 −12 0.0 −14 0.1 0 1 2 3 4 5 6 1 V+ (V) 0 0.010 −10 0.009 −20 0.008 −30 0.007 −40 −50 −60 −70 1000 0.006 0.005 0.004 0.003 −80 −90 0.1 100 Figure 10. Bandwidth (Gain vs Frequency) (V+ = 5 V) THD + (%) Attenuation (dB) Figure 9. Logic-Level Threshold vs V+ 10 Frequency (MHz) 0.
PAGE 14
TS5A3160 SCDS216C – OCTOBER 2005 – REVISED MARCH 2012 www.ti.com Table 3. PIN DESCRIPTION PIN NUMBER NAME 1 NO Normally open 2 GND Digital ground 3 NC 4 COM 5 V+ Power supply 6 IN Digital control to connect COM to NO DESCRIPTION Normally closed Common Table 4.
PAGE 15
TS5A3160 www.ti.com SCDS216C – OCTOBER 2005 – REVISED MARCH 2012 Table 4. PARAMETER DESCRIPTION (continued) SYMBOL CNO(ON) CCOM(ON) CI DESCRIPTION Capacitance at the NO port when the corresponding channel (NO to COM) is ON Capacitance at the COM port when the corresponding channel (COM to NO) is ON Capacitance of IN OISO OFF isolation of the switch is a measurement of OFF-state switch impedance. This is measured in dB in a specific frequency, with the corresponding channel (NO to COM) in the OFF state.
PAGE 16
TS5A3160 SCDS216C – OCTOBER 2005 – REVISED MARCH 2012 www.ti.com PARAMETER MEASUREMENT INFORMATION V+ VNC NC COM + VCOM Channel ON VNO NO r on + IN VI ICOM VCOM * VNO or VNC W I COM VI = VIH or VIL + GND Figure 14. ON-State Resistance (ron) V+ VNC NC COM + VCOM + VNO NO OFF-State Leakage Current Channel OFF VI = VIH or VIL IN VI + GND Figure 15.
PAGE 17
TS5A3160 www.ti.com SCDS216C – OCTOBER 2005 – REVISED MARCH 2012 PARAMETER MEASUREMENT INFORMATION (continued) V+ Capacitance Meter VNC NC VNO NO VBIAS = V+ or GND VI = V+ or GND VCOM COM VBIAS VI Capacitance is measured at NC, NO, COM, and IN inputs during ON and OFF conditions. IN GND Figure 17. Capacitance (CI, CCOM(ON), CNC(OFF), CNO(OFF), CNC(ON), CNO(ON)) A. All input pulses are supplied by generators having the following characteristics: PRR ≤ 10 MHz, ZO = 50 Ω, tr < 5 ns, tf < 5 ns.
PAGE 18
TS5A3160 SCDS216C – OCTOBER 2005 – REVISED MARCH 2012 www.ti.com PARAMETER MEASUREMENT INFORMATION (continued) V+ VCOM COM VNO NO VI Logic Input (VI) VNC NC CL(2) RL Switch Output CL(2) RL 0.8 VOUT 0.8 VOUT VNQ VCOM = V+ RL = 50 Ω CL = 35 pF GND 0 VNC IN Logic Input(1) V+ 50% tMBB Figure 19.
PAGE 19
TS5A3160 www.ti.com SCDS216C – OCTOBER 2005 – REVISED MARCH 2012 PARAMETER MEASUREMENT INFORMATION (continued) V+ Network Analyzer Channel ON: NC to COM 50 W VNC Channel OFF: NO to COM NC VCOM Source Signal VNO NO Network Analyzer Setup 50 W IN VI 50 W VI = V+ or GND + Source Power = 0 dBm (632-mV P-P at 50-W load) GND DC Bias = 350 mV Figure 22.
PAGE 20
TS5A3160 SCDS216C – OCTOBER 2005 – REVISED MARCH 2012 www.ti.com PARAMETER MEASUREMENT INFORMATION (continued) Channel ON: COM to NC VSOURCE = V+ P-P VI = VIH or VIL RL = 600 Ω fSOURCE = 20 Hz to 20 kHz CL = 50 pF V+/2 V+ Audio Analyzer RL 10 mF Source Signal 10 mF NO COM 600 W 600 W CL(1) VI IN GND 600 W Figure 24.
PAGE 21
TS5A3160 www.ti.com SCDS216C – OCTOBER 2005 – REVISED MARCH 2012 REVISION HISTORY Changes from Revision B (June 2011) to Revision C • Page Corrected the top side marking for all orderabale parts. ......................................................................................................
PAGE 22
PACKAGE OPTION ADDENDUM www.ti.
PAGE 23
PACKAGE OPTION ADDENDUM www.ti.com 11-Apr-2013 (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined.
PAGE 24
PACKAGE MATERIALS INFORMATION www.ti.com 11-Aug-2012 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) TS5A3160DBVR SOT-23 3000 180.0 8.4 TS5A3160DBVT TS5A3160DCKJ B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant 3.23 3.17 1.37 4.0 8.0 Q3 DBV 6 SOT-23 DBV 6 250 180.0 8.4 3.23 3.17 1.37 4.0 8.0 Q3 SC70 DCK 6 10000 330.0 8.4 2.3 2.55 1.2 4.0 8.
PAGE 25
PACKAGE MATERIALS INFORMATION www.ti.com 11-Aug-2012 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) TS5A3160DBVR SOT-23 DBV 6 3000 202.0 201.0 28.0 TS5A3160DBVT SOT-23 DBV 6 250 202.0 201.0 28.0 TS5A3160DCKJ SC70 DCK 6 10000 182.0 182.0 20.0 TS5A3160DCKR SC70 DCK 6 3000 205.0 200.0 33.0 TS5A3160DCKT SC70 DCK 6 250 205.0 200.0 33.
PAGE 26
PAGE 27
PAGE 28
PAGE 29
PAGE 30
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.