Datasheet

ManualsBrandsTEXAS INSTRUMENTS ManualsInterface ICsInterface IC - analogue switches SOT 23 5

SOT-23 OR SC-70 PACKAGE

(TOP VIEW)

COM

GND

3 4

YZP PACKAGE

(BOTTOM VIEW)

GND

COM

TS5A3166

www.ti.com

SCDS186B –FEBRUARY 2005–REVISED SEPTEMBER 2013

0.9-Ω SPST ANALOG SWITCH

Check for Samples: TS5A3166

FEATURES

APPLICATIONS

• Isolation in Powered-Off Mode, V

= 0 • Cell Phones

• Low ON-State Resistance (0.9 Ω) • PDAs

• Control Inputs Are 5.5-V Tolerant • Portable Instrumentation

• Low Charge Injection • Audio and Video Signal Routing

• Low Total Harmonic Distortion (THD) • Low-Voltage Data-Acquisition Systems

• 1.65-V to 5.5-V Single-Supply Operation • Communication Circuits

• Latch-Up Performance Exceeds 100 mA Per • Modems

JESD 78, Class II

• Hard Drives

• ESD Performance Tested Per JESD 22

• Computer Peripherals

– 2000-V Human-Body Model

• Wireless Terminals and Peripherals

(A114-B, Class II)

• Microphone Switching – Notebook Docking

– 1000-V Charged-Device Model (C101)

DESCRIPTION

The TS5A3166 is a single-pole single-throw (SPST) analog switch that is designed to operate from

1.65 V to 5.5 V. The device offers a low ON-state resistance. The device has excellent total harmonic distortion

(THD) performance and consumes very low power. These features make this device suitable for portable audio

applications.

ORDERING INFORMATION

For package and ordering information, see the Package Option Addendum at the end of this document.

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of

Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

PRODUCTION DATA information is current as of publication date.

Products conform to specifications per the terms of the Texas

Instruments standard warranty. Production processing does not

necessarily include testing of all parameters.

Summary of content (27 pages)

PAGE 1
TS5A3166 www.ti.com SCDS186B – FEBRUARY 2005 – REVISED SEPTEMBER 2013 0.9-Ω SPST ANALOG SWITCH Check for Samples: TS5A3166 FEATURES APPLICATIONS • • • • • • • • • • • • • • • • • • 1 • Isolation in Powered-Off Mode, V+ = 0 Low ON-State Resistance (0.9 Ω) Control Inputs Are 5.5-V Tolerant Low Charge Injection Low Total Harmonic Distortion (THD) 1.65-V to 5.
PAGE 2
TS5A3166 SCDS186B – FEBRUARY 2005 – REVISED SEPTEMBER 2013 www.ti.com This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with appropriate precautions. Failure to observe proper handling and installation procedures can cause damage. ESD damage can range from subtle performance degradation to complete device failure.
PAGE 3
TS5A3166 www.ti.
PAGE 4
TS5A3166 SCDS186B – FEBRUARY 2005 – REVISED SEPTEMBER 2013 www.ti.com Electrical Characteristics for 5-V Supply (1) V+ = 4.5 V to 5.5 V, TA = –40°C to 85°C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS TA V+ MIN TYP MAX 0 V+ UNIT Analog Switch Analog signal range VCOM, VNO Peak ON resistance rpeak 0 ≤ VNO ≤ V+, ICOM = –100 mA, Switch ON, See Figure 13 25°C ON-state resistance ron VNO = 2.
PAGE 5
TS5A3166 www.ti.com SCDS186B – FEBRUARY 2005 – REVISED SEPTEMBER 2013 Electrical Characteristics for 5-V Supply (1) (continued) V+ = 4.5 V to 5.5 V, TA = –40°C to 85°C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS TA V+ MIN 25°C 5V 2.5 Full 4.5 V to 5.5 V 1.
PAGE 6
TS5A3166 SCDS186B – FEBRUARY 2005 – REVISED SEPTEMBER 2013 www.ti.com Electrical Characteristics for 3.3-V Supply (1) V+ = 3 V to 3.
PAGE 7
TS5A3166 www.ti.com SCDS186B – FEBRUARY 2005 – REVISED SEPTEMBER 2013 Electrical Characteristics for 3.3-V Supply (1) (continued) V+ = 3 V to 3.6 V, TA = –40°C to 85°C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS TA V+ MIN TYP MAX UNIT Dynamic 25°C 3.3 V 2 Full 3 V to 3.6 V 1.5 25°C 3.3 V 6.5 Full 3 V to 3.6 V 4 CL = 1 nF, See Figure 21 25°C 3.3 V 1 pC VNO = V+ or GND, Switch OFF, See Figure 16 25°C 3.
PAGE 8
TS5A3166 SCDS186B – FEBRUARY 2005 – REVISED SEPTEMBER 2013 www.ti.com Electrical Characteristics for 2.5-V Supply (1) V+ = 2.3 V to 2.
PAGE 9
TS5A3166 www.ti.com SCDS186B – FEBRUARY 2005 – REVISED SEPTEMBER 2013 Electrical Characteristics for 2.5-V Supply (1) (continued) V+ = 2.3 V to 2.
PAGE 10
TS5A3166 SCDS186B – FEBRUARY 2005 – REVISED SEPTEMBER 2013 www.ti.com Electrical Characteristics for 1.8-V Supply (1) V+ = 1.65 V to 1.
PAGE 11
TS5A3166 www.ti.com SCDS186B – FEBRUARY 2005 – REVISED SEPTEMBER 2013 Electrical Characteristics for 1.8-V Supply (1) (continued) V+ = 1.65 V to 1.95 V, TA = –40°C to 85°C (unless otherwise noted)) PARAMETER SYMBOL TEST CONDITIONS TA V+ MIN TYP MAX UNIT Dynamic 25°C 1.8 V 3 Full 1.65 V to 1.95 V 1 25°C 1.8 V 5 Full 1.65 V to 1.95 V 4 CL = 1 nF, See Figure 21 25°C 1.8 V 2 pC VNO = V+ or GND, Switch OFF, See Figure 16 25°C 1.8 V 19.
PAGE 12
TS5A3166 SCDS186B – FEBRUARY 2005 – REVISED SEPTEMBER 2013 www.ti.com TYPICAL PERFORMANCE 3.5 1.4 3.0 1.2 TA = 85_C 1.0 V+ = 1.8 V ron (Ω) ron (Ω) 2.5 2.0 1.5 0.8 TA = −40_C 0.6 V+ = 2.5 V 1.0 V+ = 3.3 V 0.4 0.5 V+ = 5 V 0.2 0.0 0 TA = 25_C 0.0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 0 5 0.5 VCOM (V) Figure 1. ron vs VCOM TA = 85_C 12 Leakage Current (nA) TA = 25_C 0.8 0.7 ron (Ω) 2 2.5 3 14 0.9 0.6 0.5 0.4 TA = −40_C 0.3 0.2 INO/NC(OFF) 10 0.
PAGE 13
TS5A3166 www.ti.com SCDS186B – FEBRUARY 2005 – REVISED SEPTEMBER 2013 TYPICAL PERFORMANCE (continued) 3.0 12 10 2.5 Logic Threshold (V) tOFF tON/tOFF (ns) 8 6 tON 4 2 2.0 VIH 1.5 VIL 1.0 0.5 0 −60 −40 −20 0 20 40 60 80 100 0.0 0 TA (°C) 1 0 −1 −10 −2 −20 Attenuation (dB) Gain (dB) 0 −4 −5 −6 3 4 5 6 V+ (V) Figure 8. Logic Threshold vs V+ Figure 7. tON and tOFF vs Temperature (V+ = 5 V) −3 2 −30 −40 −50 −60 −70 −7 −80 −8 0.1 1 10 100 1000 −90 0.
PAGE 14
TS5A3166 SCDS186B – FEBRUARY 2005 – REVISED SEPTEMBER 2013 www.ti.com PARAMETER MEASUREMENT INFORMATION V+ VNO NO COM + VCOM Channel ON r on = VI ICOM IN VCOM – VNC Ω ICOM VI = VIH or VIL + GND Figure 13. ON-State Resistance (ron) V+ VNO NO COM + VCOM + VI OFF-State Leakage Current Channel OFF VI = VIH or VIL IN + GND Figure 14.
PAGE 15
TS5A3166 www.ti.com SCDS186B – FEBRUARY 2005 – REVISED SEPTEMBER 2013 PARAMETER MEASUREMENT INFORMATION (continued) V+ VNO NO Capacitance Meter VBIAS = V+ or GND VI = VIH or VIL VCOM COM VBIAS Capacitance is measured at NO, COM, and IN inputs during ON and OFF conditions. IN VI GND Figure 16.
PAGE 16
TS5A3166 SCDS186B – FEBRUARY 2005 – REVISED SEPTEMBER 2013 www.ti.com PARAMETER MEASUREMENT INFORMATION (continued) V+ Network Analyzer Channel OFF: NO to COM 50 VNO NO VI = V+ or GND VCOM COM Source Signal 50 Network Analyzer Setup VI 50 Source Power = 0 dBm (632-mV P-P at 50-Ω load) IN + GND DC Bias = 350 mV Figure 19.
PAGE 17
TS5A3166 www.ti.com SCDS186B – FEBRUARY 2005 – REVISED SEPTEMBER 2013 REVISION HISTORY Changes from Original (February 2005) to Revision A • Page Updated ORDERING INFORMATION table. ........................................................................................................................ 1 Changes from Revision A (October 2012) to Revision B Page • Changed pin name from NC to NO throughout the datasheet. ..................................................................................
PAGE 18
PACKAGE OPTION ADDENDUM www.ti.
PAGE 19
PACKAGE OPTION ADDENDUM www.ti.com 15-Apr-2013 Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties.
PAGE 20
PACKAGE MATERIALS INFORMATION www.ti.com 28-Jun-2013 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ TS5A3166DBVR SOT-23 Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant DBV 5 3000 178.0 9.0 3.23 3.17 1.37 4.0 8.0 Q3 TS5A3166DBVR SOT-23 DBV 5 3000 180.0 8.4 3.23 3.17 1.37 4.0 8.0 Q3 TS5A3166DCKR SC70 DCK 5 3000 178.0 9.0 2.4 2.5 1.2 4.0 8.
PAGE 21
PACKAGE MATERIALS INFORMATION www.ti.com 28-Jun-2013 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) TS5A3166DBVR SOT-23 DBV 5 3000 180.0 180.0 18.0 TS5A3166DBVR SOT-23 DBV 5 3000 202.0 201.0 28.0 TS5A3166DCKR SC70 DCK 5 3000 180.0 180.0 18.0 TS5A3166YZPR DSBGA YZP 5 3000 220.0 220.0 35.
PAGE 22
PAGE 23
PAGE 24
PAGE 25
PAGE 26
D: Max = 1.418 mm, Min =1.358 mm E: Max = 0.918 mm, Min =0.
PAGE 27
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.